Used Bas 500 Dnb for sale (16,441)

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other sizes available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm particleboard, P6 raw/white - Load capacity: 250 kg - Color: RAL of your choice - Condition: new Scope of delivery: - Columns - Main and secondary beams - Bracing crossmembers - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,137.50 net, plus transport and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,979.30 net, plus transport and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,874.00 net, plus transport and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,655.36 net, plus transport and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €7,445.76 net, plus transport and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,986.24 net, plus transport and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €7,061.76 net, plus transport and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,930.06 net, plus transport and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €9,671.76 net, plus transport and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €13,063.67 net, plus transport and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,880.98 net, plus transport and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €18,258.52 net, plus transport and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,955.92 net, plus transport and VAT Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This mezzanine platform is an example from our standard range. Of course, we develop and manufacture your storage mezzanine precisely according to your operational requirements – tailored for area, load capacity, installation height, and the intended field of application. TRANSPORT & INSTALLATION We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional charge. The extra costs depend on the delivery location and the scope of the shipment and can be individually requested from us. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are quoted as unit price/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US Kdsdexpha Iepfx Adwsg DLK, based in Nordhorn, specializes in the trade of new and used products in the areas of warehouse logistics, material handling systems, mezzanine platforms, textile warehouses, as well as machinery for commerce, industry, and trades. ✅ Four factors for success – The building blocks of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear internal height: 3,000 mm - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Flooring - Fastening material PRICES: Variant I: Base area: 20 m² | Size: 4,000 x 5,000 mm | €2,137.50 net, plus transport costs and VAT Variant II: Base area: 40 m² | Size: 4,000 x 10,000 mm | €3,979.30 net, plus transport costs and VAT Variant III: Base area: 40 m² | Size: 8,000 x 5,000 mm | €3,874.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Size: 4,000 x 15,000 mm | €5,655.36 net, plus transport costs and VAT Variant V: Base area: 80 m² | Size: 4,000 x 20,000 mm | €7,445.76 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Size: 8,000 x 10,000 mm | €6,986.24 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Size: 16,000 x 5,000 mm | €7,061.76 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Size: 8,000 x 15,000 mm | €9,930.06 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Size: 10,000 x 12,000 mm | €9,671.76 net, plus transport costs and VAT Variant X: Base area: 160 m² | Size: 8,000 x 20,000 mm | €13,063.67 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Size: 16,000 x 10,000 mm | €12,880.98 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Size: 16,000 x 15,000 mm | €18,258.52 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Size: 16,000 x 20,000 mm | €23,955.92 net, plus transport costs and VAT Optional accessories: - Guard railing Ksdpfx Adjxmkwwjwodg - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we can design and manufacture your warehouse mezzanine exactly to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the item. This product is available for collection. Delivery or shipping is available at an additional cost. The extra charges depend on the delivery location and shipment size; please contact us for an individual quote. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are per item/net, as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and craftsmanship. ✅ Four successes – The four cornerstones of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Upper edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard, grade P6, raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available upon request. Our team will be happy to provide advice! Scope of delivery: - Supports - Primary and secondary beams - Cross bracing - Flooring - Fastening materials PRICES: Version I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus shipping costs and VAT. Version II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus shipping costs and VAT. Version III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus shipping costs and VAT. Version IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus shipping costs and VAT. Version V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus shipping costs and VAT. Kdsdpfx Ajxmkqdjdwjg Version VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus shipping costs and VAT. Version VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus shipping costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we can design and manufacture your warehouse platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended application. Our design department will prepare an individual, non-binding quotation based on your specifications. Whether for new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The additional costs depend on the delivery location and scope of shipment and can be requested from us individually. PAYMENT TERMS Payment terms will be agreed upon in case of order. The price is per unit/net price as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, storage platforms, textile warehouses, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. If you have any questions, please feel free to contact us. ✅ Four Winning Factors – The Four Success Components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particleboard P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Supports - Main and secondary beams Kodpfx Aexmkkdodwsdg - Bracing crosses - Flooring - Fastening material PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €3,031.80 net, plus transport costs and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €5,376.95 net, plus transport costs and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €7,509.23 net, plus transport costs and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €9,780.27 net, plus transport costs and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €9,485.32 net, plus transport costs and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €13,729.96 net, plus transport costs and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €17,669.70 net, plus transport costs and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €25,669.35 net, plus transport costs and VAT. Further variants available Optional accessories: - Guard rail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This platform system is an example from our standard product range. Of course, we develop and manufacture your storage platform precisely according to your operational requirements — tailored to floor area, load-bearing capacity, installation height, and intended application. Our planning department will prepare an individual, non-binding offer based on your specifications. Whether you are constructing new facilities, expanding, or modernising existing installations – we support you with extensive technical expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping is possible at extra cost. The additional fees depend on the delivery location and the scope of shipment and can be requested individually from us. TERMS OF PAYMENT Payment terms to be agreed upon in case of order. The price is understood as unit price/net price or as specified in the description (plus VAT). You will of course receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four to win – The key pillars of DLK – Warehousing Technology | Levelmaker® | Logistics | Solutions

Year of construction: 1988, condition: ready for operation (used), A Zippel single-chamber cleaning system is available. Number of containers: 2, container volume: 300l, usable volume: 600l, usable height: 850mm. On-site inspection is possible. Kdodpfx Adsw A R Sijwjg

Condition: used, TECHNICAL DATA: - Load capacity: 500 kg/m² Kdjdpfx Adjumbp Rjwsg - Grid dimension: approx. 4,200 x 5,000 mm - Top edge of floor covering: approx. 4,030 mm - Clear height: approx. 3,700 mm - Colour: blue - Condition: used Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor decking PRICES: Price: from €45.00 net per m², ex warehouse Nordhorn. OPTIONAL ACCESSORIES: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The extra costs depend on the delivery destination and the size of the consignment and are quoted individually on request. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is per unit/net price as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and the skilled trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive prices. Should you have any questions, please feel free to contact us. Connect Four – The Four Success Pillars of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Kodpfx Adsvzkylswodg Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,180 mm, loading space width: 1,730 mm, loading space height: 1,880 mm, loading space volume: 10.3 m³, color: white, construction height: 2,580 mm, working width: 2,280 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with doors, refrigeration unit / Pure Ferro thermal body, * IMMEDIATELY AVAILABLE * with doors, refrigeration unit / Pure Ferro thermal body Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,500 kg - Unladen weight: 900 kg - Payload: 1,600 kg - Interior dimensions: 318 x 173 x 188 cm (L x W x H) - Overall exterior dimensions: 464 x 228 x 258 cm (LxWxH) - Loading sill height: 60 cm - Tires: 195/65R15 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 30mm - Roof material: Thermo sandwich body 30mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: Yes - Tailgate: No - Tailgate material: Thermo sandwich 30mm - Tailgate/door function: Espagnolette lock - Clearance dimension tailgate/flap: - - Interior light: 12V LED & 230V interior light - Supports: optional - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized in an immersion bath - Continuous side members - Load area made of multi-glued screen printing plate, 18 mm - PurFerro, Thermo-Sandwich construction - sandwich panels with a core of foamed polyurethane with a top layer of galvanized and polyester-coated sheet steel on both sides - insulation 30 mm PU core - rear door stainless steel hinges - espagnolette lock and stainless steel door holder - refrigeration unit (different makes possible, depending on the pictures) - refrigeration capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - air volume flow evaporator: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display is lockable and thus protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - 12 volt interior light - Lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light - Large rear lights - Large rear lights - Large rear lights. Plug - Reversing light - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Accessories can be retrofitted - please enquire: - anti-theft device - rear supports + front supports - 100km/H approval with wheel shock absorber - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Kdodpfxou Hru Ee Adwog

Condition: used, Year of construction: 2018, Marel concept 500 labelling machine Kdjdpov Sp Ebjfx Adweg - top and bottom labelling machine

Condition: like new (used), Year of construction: 2024, functionality: fully functional, conveyor belt length: 500 mm, conveyor belt width: 460 mm, Brandnew or as-is. We have both. Kdjdevtph Sjpfx Adwjg

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Kedpfxex U Thks Adwedg Spindle hours: 5,387 h

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SVC5003396, measuring range X-axis: 500 mm, measuring range Y-axis: 450 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, The machine was serviced by the manufacturer in August 2022! TECHNICAL DETAILS Measuring range X-axis: 500 mm Measuring range Y-axis: 450 mm Measuring range Z-axis: 300 mm Kjdpfjyaq Hyox Adwjdg Total measuring range: 500 x 450 x 140 mm EQUIPMENT Documentation/Manual Calibration sphere Various probe extensions Renishaw 3-position probe change system ZONE3 training part Metrology software

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: MCV 500 S Pallet Change, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: 0I MC, table width: 485 mm, table length: 800 mm, spindle speed (max.): 3,000 rpm, spindle nose: BT 40, number of slots in tool magazine: 24, input voltage: 440 V, type of input current: AC, Equipment: chip conveyor, Machine VMC 012 1 Make AMS Ksdpfx Ajyamy Ajdwedg 2 Model MCV 500 S - Pallet Change 3 Pallet change type Linear 4 Fanuc Series OI MC 5 Table Size 800X485 6 Year of Mfg 2007 7 X axis stroke in mm 800 8 Y axis stroke in mm 510 9 Z axis stroke in mm 510 10 Spindle BT 40 11 ATC - No of Tools 24 nos 12 4th axis Option Interface NA 13 Coolant Tank Available 14 Chip conveyor Available 15 Nozzle coolant Available 16 Present Condition Running

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: MCV 500 S, travel distance X-axis: 810 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: 0I MC, table width: 485 mm, table length: 800 mm, spindle speed (max.): 3,000 rpm, spindle nose: BT40, number of slots in tool magazine: 24, input voltage: 440 V, type of input current: AC, Equipment: chip conveyor, Machine VMC 007 1 Make AMS 2 Model MCV 500 S - Pallet Change 3 Pallet change type Linear 4 Fanuc Series OI MC 5 Table Size 800X485 6 Year of Mfg 2005 7 X axis stroke in mm 810 8 Y axis stroke in mm 510 Kedpfx Asyamx Sodwedg 9 Z axis stroke in mm 510 10 Spindle BT 40 11 ATC - No of Tools 24 nos 12 4th axis Option Interface NA 13 Coolant Tank Available 14 Chip conveyor Available 15 Nozzle coolant Available 16 Present Condition Running

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Kdedpfxsx Adn Uo Adwog Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs ATC Tool Change Capacity : 40 Tools (CAT40) CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Kedpfxswvrfkj Adwedg Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ksdpsw Ixw Asfx Adwedg Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: excellent (used), CATALOGUE NO. 7794 TECHNICAL DATA - inlet width: 530mm - inlet height: 200mm - shaft diameter: 370mm - shaft width: 510mm - knife length: 510mm - number of knives: 2 pcs - auto-reverse – adjustable - screen dimensions: 50x50mm - lower toothed feed roller: 1.5kW - upper toothed feed roller: 1.5kW - main motor power: 30kW - vibrating infeed table / vibrating length: 3900mm - vibrating width: 500mm 1.5kW - discharge conveyor length: 5000mm Kdodpfx Adsya Hgpjwsg - belt width: 380mm - waste chute hopper: 2500x3020x2200mm - platform: 4650x750x1770mm - machine dimensions with conveyor and vibrating table (L/W/H): 8900x1200x2550mm - weight: approx. 6000kg ADVANTAGES – adjustable auto-reverse – includes 3900mm vibrating table – includes 5000mm conveyor – German-made – very good condition – used industrial wood chipper Net price: 98,900 PLN Net price: 23,550 EUR (according to 4.2 EUR exchange rate) (Prices subject to change with significant fluctuations)

Condition: good (used), Duplo DPB-500 Perfect Binder Machine in very good condition, ready to work, Low mileage. Machine very fast in settings – control from touch panel. Cover feeding, 3 rollers applying glue including side gluing, milling Photocells, external waste extraction. Technical data: Efficiency up to 530 cycles/h Binding thickness 51mm Max. format 360x320mm Kdodpfx Ajx Tvlpjdwjg Min. format 120x120mm Cover thickness 300g Weight 695kg Power supply 400V

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 14,835 kg, maximum load weight: 11,085 kg, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,300 mm, loading space width: 2,480 mm, loading space height: 900 mm, number of beds: 1, Equipment: ABS, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, onboard computer, parking heater, truck registration, Volvo FH 500 6x2 flatbed truck with Palfinger crane and radio remote control | I-Shift, retarder | Axle weigh scale | LED headlights | 5 hydraulic extensions | Automatic transmission, EURO 6 | Trailer coupling | Heated seats, auxiliary heater, air conditioning, refrigerator | Cruise control, electric windows, electric mirrors | Steering axle + lift axle | Tires: 385/55/R22.5 | Loading dimensions: L: 6.30m, W: 2.48m, side wall height 0.90m | Total length: 10.12 meters, mass A: 10.00 meters | Subject to errors, input mistakes and prior sale. Kdjdpfxjya Ncme Adwjg

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm Kdsdpfjh Dwmlex Adwsg - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Screw diameter: 25 mm Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Type: Horizontal Ksdpfx Adexl Hpgjwjdg Drive: Hydraulic

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, workpiece weight (max.): 200 kg, table width: 500 mm, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, For sale: HAAS UMC-500 5-Axis Universal Machining Center Condition: Absolutely brand new machine. Only one part was produced for test machining. The equipment has been unused and stored for 2 years. Main technical specifications Travel: X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm Table: Diameter: 500 mm Maximum workpiece weight: 200 kg Kdodpoxg Nd Nefx Adwjg 5-axis rotary/trunnion table (trunnion type) Spindle: Inline direct-drive 10,000 rpm 30 HP (22.4 kW) CAT 40 taper (40T) Through-spindle coolant: 300 psi (21 bar) Tool changer: 30 tool positions Side-mount, high speed Precision and compensation: Temperature compensation DWO/TCPC – Dynamic Work Offset and Tool Center Point Control Rigid Tapping Equipment and features: Haas NGC CNC control (FANUC compatible) 1 GB memory Ethernet connection, WiFi connectivity USB port, color 15” LCD display Early power-failure detection module Memory lock (keyswitch) Spindle coolant system Protective enclosure with doors Internal lighting Centralized lubrication system Top cover Measurement and calibration equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macros, spindle orientation, coordinate rotation and scaling) Rotary-Axis calibration tool RJH remote jog handle with color display Chip and coolant systems: Coolant tank – 95 gallons (360 L) Initial fill with Blaser coolant emulsion Chip conveyor (belt type – CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application Haas UMC-500 is a compact yet powerful universal 5-axis machining center designed for the production of complex, multi-sided, and free-form surface parts. Suitable for simultaneous 5-axis machining as well as 3+2 machining, significantly reducing setup operations and ensuring high accuracy. If you have further questions, we are happy to assist.

Condition: excellent (used), CATALOG NUMBER 7846 TECHNICAL DATA - minimum width of central prism after cutting: 85 mm - minimum length of cut log: 1300 mm - maximum diameter of cut log: 350 mm - shaft diameter: 70 mm - circular saw blade diameter: 500 mm - maximum number of circular saw blades on upper and lower spindle: 4 pcs each - 2 feed speeds + forward/reverse + inverter control - drive motor power (lower spindle): 22.5 kW - drive motor power (upper spindle): 18.5 kW - feed drive motor power: 1.1 kW - track length: 4450 mm - extraction outlet diameter: 3 x 200 mm Kodpfjx Hhw Rex Adwjdg - 3 rows of detents - dimensions (L/W/H): 6040x1500x1850 mm - weight approx. 1250 kg ADVANTAGES – Made in Poland, WALTER brand – Complete operating documentation (DTR) – Used machine, in very good condition Net price: PLN 36,900 Net price: EUR 8,790 Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7848 TECHNICAL DATA - Minimum width of the central prism after cutting: 70 mm - Minimum length of the cut log: 1300 mm - Maximum diameter of the cut log: 350 mm - Shaft diameter: 70 mm - Circular saw blade diameter: 500 mm - 2 feed speed options + forward/reverse + inverter control - Maximum number of saw blades on the upper and lower spindle: 4 pcs each - Lower spindle drive motor power: 22 kW - Upper spindle drive motor power: 18.5 kW - Feed drive motor power: 1.5 kW - Track length: 4450 mm - Additional track extension: 3000 mm - Overall dimension of the additional extension: 3700 x 520 x 950 mm - Extraction outlet diameter: 3 x 200 mm - 3 rows of pawls before the blades - 1 row of pawls after the blades - Dimensions (L/W/H): 6010 x 1500 x 2000 mm - Weight: approx. 1400 kg ADVANTAGES - Polish manufacture, WALTER brand - Additional 3000 mm track extension - DTR documentation – used machine, very good condition Kedpfsx E Shwjx Adwedg Net price: 37,900 PLN Net price: 9,020 EUR based on the exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)