Used Basika Grease Separator for sale (7,264)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Bjdpfx Asfz Dvveknjww ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams Bsdpjw Nafkefx Akneww - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); Bjdpfx Akswcp I Ajnsww - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Eddy current non-ferrous metal separator type EIS 1000 S, supplied by Panizzolo (Italy), with Panizzolo vibrating feeder. For separating aluminium, copper and other non-ferrous metals from plastics, rubber, wood and inert materials. Technical data: – Type: EIS 1000 S – Belt width: 1,000 mm – Panizzolo vibrating feeder with OLI 1.1 kW vibration motor – Power supply: 3 × 400 V / 50 Hz Electrics: Bjdpez I Itcefx Aknoww – Separate control cabinet with Schneider ClimaSys cooling unit – 2× Schneider Altivar Process frequency inverters (variable speed) – Control panel with touch display, main switch, emergency stop Scope of delivery: separator, Panizzolo vibrating feeder (OLI 1.1 kW vibration motor), control cabinet. By arrangement, an older non-working separator from the same supplier can be included as a source of spare parts. Condition: in working order, separator and feeder tested running. Inspection and test run by appointment on site. Loading onto truck on site. Sold as is, price net plus VAT.

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. Bedsvy A Urspfx Akneww New conveyor belt cleaner.

Condition: used, Year of construction: 2006, functionality: fully functional, total length: 6,150 mm, total width: 2,470 mm, total height: 2,065 mm, overall weight: 13,000 kg, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, # STADLER STT 5000 Ballistic Separator – Year of Manufacture 2006 – Shafts Renewed in 2025 For sale is a regularly maintained and well-preserved ballistic separator from the manufacturer STADLER, type STT 5000, year of manufacture 2006, from our existing commercial waste sorting plant. The machine was used for the mechanical separation of various waste and recyclable material fractions and was permanently integrated into our stationary sorting line. ### Technical Data - Manufacturer: STADLER - Type: STT 5000 - Year of Manufacture: 2006 - Overall Length: approx. 6,150 mm - Overall Width incl. Motor: approx. 2,470 mm - Overall Height: approx. 2,065 mm - Overall Weight: approx. 13,000 kg - Number of Paddles: 6 - Paddle Length: 5,050 mm Bwodpfx Ako Ahpa Esnsw - Motor Power: 11 kW - Design Capacity: 12 t/h - Design Volumetric Flow: 80 m³/h ### Maintenance and Repair The ballistic separator was regularly and carefully maintained throughout its service life. Necessary repairs and the replacement of wear parts were carried out continuously. Major maintenance measures: - December 2025: All shafts of the ballistic separator were completely renewed. The investment costs amounted to approximately €80,000. A corresponding invoice is available. - 2024: All paddles were renewed. The machine is equipped with paddle coverings made of sheet metal. - Regular maintenance: The screen segments with a grain size of 50 mm are regularly replaced. These extensive measures ensured continuous investment in the maintenance and preservation of the machine. Corresponding invoices and maintenance records can be provided upon request. ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible by prior appointment. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation and records of the maintenance work carried out can be provided upon request. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, WOLFF - Sand separation and washing plant Bsdjy N Rtyspfx Aknoww

Condition: used, Year of construction: 2023, Vemag Separator -Model: 813 -Power: 0.16 kW -Weight: 29 kg Bwedpfx Aks Agrfusnow -Year of manufacture: 2023 This separation device effectively separates bones, cartilage, tendons, etc. from products. Suitable for all types of raw materials: meat, fish, and vegetables.

Condition: ready for operation (used), Year of construction: 2011, Compact cable recycling machine, specifically designed for processing telecommunications, automotive, electronic, and other cables with small cross-sections. The unit consists of a granulator and a separator for use with copper or aluminum cables. The machine dry-separates the insulation from the metal using an air-vibration table. Manufacturer: I.R.S. ITALIA RECYCLING SYSTEM S.R.L. Name/Model: KOMBI Type: PLANT Supply voltage: 400 V Year of manufacture: 2011 Power: 22 kW Capacity: 180-220 kg/h Dimensions: 2835x1570x2310 mm Bjdpfx Ako Afpc Tonjww Technical condition: used machine, very good condition.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, TRI OPTIQUE Manufacturer: PELLENC Type: M 2800 BB HR Working width: 2,800 mm Option installed in June 2024: separator for all types of metal, including stainless steel, metal sensor. New belt. The machine is capable of sorting all types of plastic by quality, all metals including stainless steel, and wood. The machine has just been serviced. Feeding system: Manufacturer: SINEX Type: MU 75 6500 Power: 2 x 3 kW Output conveyor 1: Manufacturer: RMIS Bedpjyy Aa Tefx Aknoww Output conveyor 2: Manufacturer: ARVAL

Condition: used, Year of construction: 1978, el. cabinet. Documents are available. Capacity: app. 15-20.000 ltr/h Bwjdj Ahluqjpfx Aknjw Suitable for wine, beer

Year of construction: 2006, condition: used, Year of manufacture: 2006 Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Bwodpfszry N Tox Aknew Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Bodpfx Akev Aailsneww

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Bwedpfx Ajzt I Rusknow

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Description Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/screen by a paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination to optimize residence time and separation efficiency. Sold with a 1000 L hopper and a flexible screw conveyor. In like-new condition (used only for testing), fully functional, and available immediately. Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solid outlet) • Construction: 304 stainless steel • Basket/screen: wedge wire basket (304 stainless steel) • Paddle: “expanded 7.5°” (304 stainless steel) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg Bwjdozc H H Iepfx Aknjw • Purge air/gas (seals): clean/dry/filtered air/gas required Motor (motor plate) • Motor 3~: 2.2 kW, 50 Hz, 230 V Δ / 400 V Y • Speed: 1450 rpm (50 Hz) • Protection / efficiency: IP55, IE3 • Mounting: IM B35, service S1 Included equipment (sold with) 1) Hopper • Volume: 1000 L • 304 stainless steel, open design, “food grade” finish (Type C Plus) • Level probes: high + low • 30° outlet 2) Flexible screw conveyor • Supplier: Spiroflow Ltd • Model: 146SH • Length / inclination: 3 m 30° • Outlet: Ø300, 30° standard • Components: reverse bung / drop trap / QR flanges (quick disassembly) Price and conditions • Availability: immediate • Location: Martigny (Switzerland) • Condition: like new, functional • Visit / inspection: upon request Transportation costs are the responsibility of the buyer.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Bwodsvyuy Hjpfx Aknow Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: good (used), Year of construction: 2020, The material separator from Koch Technik is for sale. The scope of supply includes: the price is per unit, 3 units in stock. 2 x KEM dosing station, version 3.7 – material locking mechanism – level sensor – hopper – pre-mixer, type G Bwodpfx Akjz Nxwvonsw 1 x KEM Touch Material separator complete with the components listed above. Mixer, type G: complete with motor and container. Supply voltage: 230V.

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Bwodpoy N Rlvsfx Aknow The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: used, Year of construction: 2008, Control system: Beckhoff, operation: touchscreen. Equipment: extraction system, milling and sawing separation, shuttle/loading system, enclosed machining area, safety enclosure with viewing windows, emergency stop switch, start/stop push buttons, three-color signal tower, pneumatic air preparation unit, Ruwac industrial vacuum cleaner. The system is operational and was shut down at the beginning of the year. Inspection possible by arrangement. Bwedpj Ahi Tvofx Aknew

Year of construction: 2008, condition: used, functionality: fully functional, suction capacity: 4,000 m³/h, Oil mist extraction unit for CNC machines, ScandMist MA 400D filter separator. Fan with a power of 7.5 kW. Inlet diameter: 315 mm. Capacity: 4000 m3/h. The unit is equipped with a frequency converter. Several units of this device are available (the price stated is for 1 unit). The ScandMist filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, which results in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency and can operate continuously without interruptions. Bodpfxoz R Rlvo Aknsww The liquid collects at the bottom of the filter and can be reused for operation. These units use a 3-stage mechanical filtration process. Stock number: 1176 (3/3)

Condition: used, Year of construction: 2014, (1) Manual sorting conveyor; R&K; Serial No.: 100008/2014; Approx. 19,664 x 10,462 x 4,035 mm; 2 x 2.2 kW; 400 V; IP 5 (1) Permanent magnet MD 1000x600x230F; Magsy; Serial No. 189; Year of Manufacture: 2014 (1) Metal detector MN 5.2 D 1000/300; Mesutronic; Serial No.: 2016 - 1001 - D; 100-240 V; 1.25 A; 50/60 Hz; IP54 (1) Conveyors, multiple units; Procomac; 2.2 kW; 400 V; IP55 where specified Bwodpfx As Ahhkgoknew Technical Details: 100-240 V; 1.25 A; 50/60 Hz; IP54

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Bedjtqf Dbopfx Aknoww Solids: 1.45 kg/ dm Test books, tools, drawings available!

Year of construction: 2021, condition: like new (used), We are offering a Senro optical sorter, manufactured in 2021, for sale. The machine has been used for a limited number of hours. It consists of an infeed conveyor, which transports the product to the sorting machine. The sorting machine is equipped with an air bar containing nozzles that use air pressure to propel the product to be sorted across the bar. The hopper can be equipped with either NIR detection or visual detection. Cameras are still installed. Price negotiable; indicative price €50,000. Bwedpjzw I Hdsfx Aknew If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2022, PCB Separator Aurotec AUO 3000C Vacuum Cleaner Aurotec YSF-V553 Bwsdpfex U R S Tox Aknow

Condition: used, Year of construction: 2019, Automatic separator for removing bacteria from milk and whey (bactofuge). These operations are necessary to eliminate bacterial contaminants that may pose a health risk and shorten the shelf life of the product. Brand: POLAT (Makina San) Model: PMS BX5 Centrifuge speed: 6,200 rpm Year of production: 2019 Power supply: 400 V Installed power: 22 kW Weight: 1,220 kg Condition: used Bedpfx Ajyc E E Ajkneww Electrical documentation available.