Used Basika Grease Separator for sale (6,486)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. Kedpfsua Tbwex Aansfa SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen -Slotted screen: separator screen -Gap dimensions: mm Kfedpfowx E Tajx Aanja -Inside: Ø 129 mm -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, Comprehensive recycling lines | Screw conveyors | Intelligent feeding systems — 📍 Who are we? We are a Polish manufacturer of machinery and integrated recycling systems. Our solutions are already in operation at many facilities across Europe. We specialize in the design, construction, and commissioning of complete process lines for the recovery of non-ferrous metals and plastics. — ⚙️ Our product range includes: • ATV series eddy current separators – both symmetrical and eccentric models • Screw conveyors (standard, progressive, inclined, dosing) • Big-bag feeding and unloading systems, feed hoppers, augers, feeders • Steel supporting structures, platforms, maintenance stairs Kfedpfx Aowx H Dgsanja • Integration of equipment into complete process lines with washing, flotation, magnetic separation, and drying systems — 🔍 ATV Eddy Current Separators – what do we offer? Our separator line includes over a dozen models with belt widths from 330 mm to 2200 mm, in two variants: • Symmetrical models (A) – classic design, ideal for glass, ASR, PET • Eccentric models (P) – greater separation precision, especially for fine metal fractions ATV separators are available in the following sizes: • ATV-40 to ATV-240 • Belt width: from 330 mm to 2200 mm • Rotor up to 4000 rpm (depending on version) • Drive: motors from 3.0 kW to 7.5 kW + belt drive motor • All equipment is CE certified We can tailor the separator to your material fraction, capacity, and line requirements. 🧠 In-house test center For clients who wish to verify the effectiveness of our solutions on their own material, we offer the opportunity to test it at our R&D and testing center in Poland. You can send your material (PET, glass, ASR, metals, e-waste), and we will select and configure the optimal parameters for the equipment—even before purchase. — 🏗️ Comprehensive solutions In addition to equipment supply, we offer: • Design and construction of complete turnkey installations • On-site installation and commissioning of equipment • Technical support and service • Possibility to integrate with existing lines or construct new ones from scratch

Condition: new, Year of construction: 2024, functionality: fully functional, Magnetic coolant separator MMA series, type MMA-100a Made in Poland by MultiMasz. Declaration of Conformity + manufacturer's warranty. Ksdpfouuinwex Aansfa MMA-63a transmitting capacity 63 l/min. MMA-100a transmitting capacity 100 l/min. MMA-160a transmitting capacity 160 l/min. MMA-250a transmitting capacity 250 l/min. Standard Voltage 3 X 400V/50Hz [other on request] Rotation speed of the drum 4,9 rpm Power 0,18 kW MMA separators are designed for work primarily on grinding machines, and other machines tools and devices with water-based coolants, or straight cutting oils, to extends the life cycle of machine tools and the cooling fluids. MMA Separator provides increased productivity with less downtime for machine coolant replacement. It is the best solution to perform the machining accurately due to the quality of the surface and the accuracy of the final dimensions. Shipping available all over the world.

Condition: new, TECHNICAL SPECIFICATION weight: 120 kg Air flow: 3 400 m3/h Diameter of the extension pieces: 120 mm THE OFFER INCLUDES Ksdeg Rb Enepfx Aansfa Blast media separator AMS-3 LAND REKO® CE declaration of conformity 24 months warranty for consumers 24 months warranty for contractors unit also available for leasing or financing

Condition: used, Year of construction: 1977, functionality: fully functional, power: 4 kW (5.44 HP), rotational speed (max.): 9,200 rpm, input frequency: 50 Hz, Westfalia centrifuge/separator type SA7-06-076 with control cabinet (electronic control) 9,200 rpm; year 1977, serviced annually; includes relevant tools, spare seals, and operating manuals. (Unit has been dismantled, cabling not included.) Ideally suited for mobile juice presses (lightweight, compact size, relatively low power consumption). Kfjdpfsw S Dqcsx Aansa

Condition: good (used), functionality: fully functional, total length: 2,000 mm, total width: 850 mm, total height: 1,400 mm, Stripper/Casing remover is used to remove casings without damaging sausages Kjdpsv Aadvsfx Aanjfa Brand Townsend Model 2600 Dimensions 2000x850x1400mm

Condition: used, Stainless steel tank, stainless steel tank, separator, filter tank, for plastic injection molding machine Kfjdpfx Ajiqlkmjanea -Stainless steel tank: separator -Diameter: see photos -Reservoir: with sight glass -Total dimensions: Ø 248 x 435 mm -Weight: 17kg

Condition: good (used), Power: 7,8 kW. Amperage: 52 A. Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Conveyor belt: 1.400 mm. AA. : Ca. 2.800 mm. With transformer rectifier of 380V. primary. Kjdpfx Aaog Stwmenofa Overband separator will be overhauled, sandblasted, painted.

Condition: good (used), Year of construction: 2019, overall weight: 1,620 kg, total length: 31,280 mm, total width: 15,040 mm, total height: 20,900 mm, input voltage: 220 V, type of input current: AC, Sorting using color and image, Easy setup for different types of materials. With a capacity of up to 2 metric tons per hour, it is the ideal high throughput sorting solution for separating zinc gray metals, copper, brass and circuit boards. Kodpsq Ulw Rsfx Aanefa The extremely flexible, multi-sensor sorting unit can be programmed to create fractions for wires, seeds and non-metallic materials such as plastics. It offers a high return on investment for mixed waste, electronic scrap and metal recycling. You can see it in operation.

Year of construction: 2022, condition: new, SEMI-AUTOMATIC GREASEPROOF FERMENTER FOR 60 BERLINER/ DOUGHNUTS with GARBAGE RACK Completely made of stainless steel Semi-automatic turning device Ksdpod R T Uxefx Aanjfa with miter cabinet and 10 tilting trays on rollers lateral drain for the grease Connection 16 Ah Power/voltage 10,4 Kw 400 v/ 50 Hz Dimensions 1243x1075x820 total length 2315 cm with side drain plate weight 220 kg Hourly output 600 doughnuts per hour Grease capacity 67 liters for further questions please call thank you

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Ksdpfx Ajpkwausanefa Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 2,000 mm, total width: 1,600 mm, total height: 3,100 mm, input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, SepaMatic separator with loading for 200 ltr containers Type: SEPA 1200 ST Voltage 400 V, 50 Hz, 14 A, Power 7 kW, Dimensions: 2000 mm x 1600 mm x 3100 mm Kedevztpijpfx Aanjfa Trolley with parts included

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Kjdpfjwbzxqex Aanefa -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

Condition: new, functionality: fully functional, Um Verunreinigungen zu entfernen, die die Lagerung oder den Verkauf von Getreide erschweren können, werden spezielle Reinigungsgeräte eingesetzt – sogenannte Separatoren. Diese Geräte sind für den Einsatz in kleinen und großen landwirtschaftlichen Betrieben konzipiert. Der Bediener kann die Fraktionsgröße individuell anpassen und verschiedene Getreidearten verarbeiten, darunter Roggen, Weizen, Sonnenblumen, Mais, Hülsenfrüchte oder Kaffeebohnen. Funktionsprinzip des Separators: Das Getreide wird in den Einfülltrichter gegeben, wo es sich gleichmäßig verteilt und durch sein Eigengewicht in die Separationskammer gelangt. Dort sorgt ein intensiver Luftstrom zunächst für die Abscheidung von schweren Verunreinigungen und Steinen, die in die erste Fraktion gelangen. Das gereinigte Getreide wandert zur nächsten Ebene weiter, während leichte Verunreinigungen und beschädigte Körner durch den Luftstrom auf das letzte Tablett transportiert werden. Staub und feine Partikel werden über den Luftauslass entfernt. Durch Kalibrierung und Massenabscheidung wird das Saatgut optimal für die Aussaat vorbereitet, wobei die vollständigsten und gesündesten Körner ausgewählt werden. Dies führt zu einer höheren Gleichmäßigkeit, reduziert den Saatgutbedarf und steigert den Ertrag. Die Vorreinigung zielt auf die Staubentfernung und teilweise Beseitigung von Nicht-Getreide-Abfällen ab, was die Vorbereitung des Getreides für die Zwischenlagerung und weitere Verarbeitung beschleunigt. Technische Daten: Länge: 1700 mm Kjdowi Sg Iopfx Aansfa Breite: 660 mm Höhe: 1590 mm Gewicht: 200 kg Leistung: von 0,5 bis 5 Tonnen pro Stunde Motorleistung: 0,18 kW Spannung: 230/400 V

Condition: ready for operation (used), 1) Electr. engine 5 kW 2) Vibrating dispenser, 3) Original STADLER construction (approximately 12 tons) Everything works and is ready to work - to check on site. Video on demand. Location; Poland Kfsdpfx Aeiau S Dsansa

Condition: new, Year of construction: 1987, PowerCore dust collector Donaldson Torit CPV Type: CPV6 Unused Kfodpfoxc Eyxsx Aanja Equipped with new filter cartridges See our other advertisements VMA Wekerom

Condition: excellent (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Ecoair, Air Oil Separator Filter Type N 2785000 / 49 302 52 171 -Inside/outside: Ø 110/170 mm Ksdpfxewbzzxs Aanefa -Bolt circle: Ø 210 mm -Quantity: 1x air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Dimensions: 200mm x 200mm See our other ads Ksdpfx Ajxc Ew Djansfa VMA Wekerom

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mahle Air Oil Separator Filter Type 852 631 -Inside/outside: Ø 120/170 mm Kjdpfjwbz Daox Aanefa -Quantity: 1x air filter available -Dimensions: Ø 200 x 610 mm -Weight: 4.2 kg

Condition: used, Pneumatic grease gun, compressed air grease gun, grease pump -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm Kfjdpfx Aoi Agxqoansa -Total dimensions: Ø 606 x H1020 mm -Weight: 63 kg

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator, filter dryer housing, filter dryer, filter drier, liquid filter dryer Kfodpfx Aaoqpl Skenea -Manufacturer: Danfoss, liquid collector with filter dryer 2 pieces / double version -Filter dryer: Type: DX 083 -Permissible operating pressure: 28 bar -Individual components: see photos -Price/tax: complete -Dimensions: 350/350/H360 mm -Total weight: 13.8 kg

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator, filter dryer housing, filter dryer, filter drier, liquid filter dryer -Manufacturer: Danfoss, liquid collector with filter dryer -Filter dryer: Type: DX 033 -Permissible operating pressure: 28 bar -Individual components: see photos -Dimensions: 190/180/H360 mm Kfedpfx Ajqpl Sgsanea -Weight: 6.1 kg

Condition: used, Year of construction: 2006, Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 Ksdpfsiz Udwex Aanofa -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm -Weight: 38 kg

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator Kedsqpl Scepfx Aanofa -Manufacturer: ESK Schultze, liquid separator for cooling units -Type: FA 16 -Permissible operating pressure: 25 bar -Dimensions: Ø 132 x 275 mm -Weight: 1.7 kg