Used Basin Of Part Of for sale (17,420)

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use Lrodpexhdwyefx Ab Uet AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types

Year of construction: 2008, condition: ready for operation (used), Bio-Circle Compact parts cleaner / parts washing station - Year of manufacture: 2008 - Working area width: approx. 700 mm - Working depth / working area depth: approx. 450-480 mm - Working height: approx. 800 mm Lodpfx Aboztd Ngo Uort - Load capacity / load capacity up to approx. 100 kg - Empty weight: approx. 45-55 kg - Heating power: approx. 650-700 W - Temperature (preset): approx. 41 °C - Electrical connection: 230 V, 50 Hz - Filling volume (optimal / maximum): approx. 100 L - Tank / basin material: LDPE plastic (low-density polyethylene) Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 45 kg

Condition: used, Year of construction: 2001, total length: 13,500 mm, total width: 4,500 mm, Equipment: documentation/manual, type plate available, For sale from the laundry. Complete, working Kannegiesser mangle line (pair). Working width: 3000 mm. Full technical documentation. Composition: 1. EMD feeder - universal, manual and automatic feeding, 2 feeder paw stations, stretching brushes and arms for lifting heavy elements. 2. HPM double-shaft mangle - 2 x Ø1200 mm shaft, stainless steel basin, good mangle quality. Additional option for gastronomy. 3. RFM reversible folder - precise folding with 2 longitudinal and 3 transverse folds, with an additional track for smaller elements. Stacker Year of production: end of 2001 Technical condition: as after taking over from the laundry, efficient, in use until the end of February 2025, regularly maintained. Required space: approx. 13 m × 4.5 m, Required power 39 kW Why is it worth it? - Kannegiesser brand – leader in the laundry ironing industry. - Easy availability of service and parts: service also in Poland. - High efficiency and precision: ideal for large quantities of flat laundry. - Price-to-capacity and quality ratio. A new one is worth over €400,000. Starting price: €69,900 net Lredpfx Aev Nbxneb Ust Do you have any questions? Do you want to know more? Contact us – we will be happy to provide additional information and send you technical details.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: A-250101, total length: 4,600 mm, total height: 1,800 mm, total width: 1,250 mm, input voltage: 230 V, overall weight: 650 kg, compressed air connection: 4 bar, warranty duration: 3 months, input current: 6 A, roll width: 680 mm, pipe diameter (max.): 76 mm, product height (max.): 120 mm, product height (min.): 25 mm, product length (max.): 550 mm, product length (min.): 100 mm, Item A250101 – Record Jaguar 88 Flow Pack Machine For sale: Used Record Jaguar 88 flow pack packaging machine. Product flow direction: Left to right Machine finish: Painted Machine Specifications: Overall machine length: 4.6 metres Machine width: 1.2 metres Overall machine height: 1.8 metres Working height: 0.85 metres Usable infeed conveyor length: 2.0 metres Usable outfeed conveyor length: 0.5 metres Flight distance: 400/800 mm Machine capacity: 3,600 packs per hour Machine Connections: Ledpfx Aez Er Nveb Uort Power supply: 230 V N + PE Connected load: 3.2 kW Plug type: CEEform, 5-pin, 16 A Compressed air: Yes (the machine can also operate without compressed air) Machine Features: • Independent temperature control for the cross-sealing unit and longitudinal sealing rollers • 1 set of pulling rollers • 1 set of sealing rollers • 1 set of folding rollers for the longitudinal sealing seam • 1 set of sealing knives, 270 mm wide • Passage height of the cross-sealing unit: 150 mm • Safety coupling in the cross-sealing unit • Flight distance: 400/800 mm • Two-speed control of the flights • Fixed forming shoulder • Maximum film width: 600 mm • Top chain with flights • Mechanical film-length adjustment • Pneumatic product pushers • Mechanical adjustment of cross-sealing speed • Rotating control panel • Machine mounted on wheels for mobility, with adjustable feet • Electronic speed control via potentiometer • Additional 230 V socket • Equipped with a hot foil printer for printing the date on the film • Pneumatic opening and closing of the sealing rollers • Usable infeed conveyor length: 2,000 mm • Usable outfeed conveyor length: 500 mm • All parts that come into contact with the product are made of plastic or stainless steel The machine is particularly suitable for tall and/or long packages.

Condition: defective spare-parts repository (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 21236, overall weight: 15,000 kg, empty load weight: 5,320 kg, Ludden&Mennekes LM 24 L – 24 m³ compactor container | Defective / for repair For sale: Ludden&Mennekes LM 24 L compactor container, manufactured in 2014, with a capacity of 24 m³. This heavy-duty compactor container is offered as a defective/repair item. The machine has damage to the compaction section and needs to be technically repaired before further use. The container itself is robustly built and may therefore be of interest to a company that can repair the machine itself, for refurbishment, or possibly as a donor/parts machine. Technical data: Brand: L&M Type: LM 24 L Year of manufacture: 2014 Machine number: 21236 Lrodpfx Ajz Eq N Ueb Uot Capacity: 24 m³ Power supply: 400 V / 50 Hz Motor power: 5.5 kW Nominal current: 11.3 A Maximum fuse rating: 25 A Weight: approx. 5,320 kg Permissible total weight: 15,000 kg Heavy-duty industrial design Known defects / damage: The compactor container is explicitly offered as defective. The machine has, among other things: the breaking edge pushed up/deformed; the compaction block is bent and dented; the lids are deformed and damaged; visible signs of wear, rust, and paint damage are present. The damage is shown as accurately as possible in the photos. The machine is therefore sold in its current condition, with repair necessary before it can be put back into normal use. Due to the large capacity of 24 m³ and the heavy-duty construction, this machine may be of interest as a refurbishment project, repair item, or parts machine. Inspection is possible by appointment. For additional information on the technical condition or the existing damage, please do not hesitate to contact us. Keywords: Ludden Mennekes, Ludden + Mennekes, L&M, LM24L, LM 24 L, compactor container, 24m3, 24 m³, waste compactor, container compactor, defective compactor container, repair item, refurbishment project, waste compaction, recycling, parts machine.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system Lredjz A D Irjpfx Ab Ust

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Due to warehouse clearance and inventory reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press / Chip press Manufacturer: RSN Type: ECO Motor power: 5.5 kW Briquet diameter: approx. 60 mm Year of manufacture: 1987 Dimensions: approx. 235 cm x 130 cm x 113 cm The machine has been stored in my warehouse for some time. It was once taken in as part of a trade-in, but there was never enough time to assemble and inspect the machine. Sale is exclusively as a defective parts machine or for refurbishment by hobbyists. Any defects cannot be ruled out. Visually, the machine appears to be complete. No parts are missing. Ledpfx Abez Efvce Uort (See pictures. A prior inspection is highly recommended; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading and packaging can be arranged by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options, so please inquire. The stated selling price is the net price plus VAT. An invoice with VAT breakdown will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty period is 12 months.

Year of construction: 2018, operating hours: 8,580 h, condition: used, functionality: fully functional, machine/vehicle number: E21SI18102702508, This is a combination oven, model SCC 201 WE Elektro, from the premium manufacturer Rational. The unit has undergone a thorough inspection in our in-house workshop, has been fully refurbished, and is in perfect working order. The unit has accumulated 8580 operating hours. The recommended retail price is €21,940.00 (net) / €26,108.60 (gross). The stated price is gross, including 19% VAT. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device model? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or iCombi Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked and fully functional – or your money back. Flexible shipping or self-pickup options. Competent advice - before and after the purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. Ledpfx Asz Etknjb Uort This combination oven offers space for 20 x 1/1 GN containers. In automatic mode, the unit independently recognizes the ideal cooking process, the size of the food, the quantity being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport WxH: 925x1900mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SI18102702508 Year of manufacture: 2018 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal insertion: 1/1, 1/2, 2/3, 1/3, 2/8 GN Servings per day: 150-300 Condition: Used, inspected, fully refurbished, in perfect working order. Additional information: In combination oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control - self-cleaning. Core temperature probe. Handheld spray nozzle with automatic retraction. 8.5-inch color display and touchscreen. 5 fan speeds programmable. Integrated, maintenance-free grease separation system. Automatic start time preselection. 7 cleaning levels for unattended cleaning - even overnight. Spraying can be adjusted in 3 levels - from 30°C to 260°C. 5 programmable fermentation levels. USB interface. Seamless, tub-shaped hygienic cooking chamber, rounded corners. Halogen cooking chamber lighting. Shipping: Delivery or self-pickup by arrangement. Worldwide shipping upon request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece Lrjdpsb Uhk Uefx Ab Uet

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA Ledjd Dt Rzepfx Ab Uert -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Condition: like new (used), Year of construction: 2015, For Sale: Brand: Kaak Driem Type: Sheeting Bread Line Year of Construction: 2015 The line has already been disassembled and cleaned. It will be reassembled around mid-January. Currently offered for sale for €280,000. Please refer to the PDF file for the complete description and specifications. Layout drawings, electrical diagrams, and parts lists are available. It is possible to view this line at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland Lrodpfoz Epddjx Ab Uot

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance Ljdpofbt Siofx Ab Ujrt • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. Lrodpfjzfyu Aox Ab Uot POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Equipment and features: Lrjdpfxezy Hkte Ab Uot Grundfos pump Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 Ledpfx Aszzd Dmeb Usrt RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. KSN drum washers are designed for many years of operation in industrial environments. Lodpfx Aszy Hd Hjb Usrt Standard equipment: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical details can be found in the attached PDF document.

Condition: refurbished (used), Year of construction: 2013, operating hours: 50 h, functionality: fully functional, workpiece weight (max.): 500 kg, table diameter: 450 mm, total length: 7,200 mm, gear diameter: 500 mm, total height: 3,300 mm, total width: 4,500 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 240 mm, spindle speed (max.): 450 rpm, table bore: 125 mm, spindle speed (min.): 100 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 16,800 kg, distance table to spindle center: 710 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. Lodsz Et E Espfx Ab Uert The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Year of construction: 2018, condition: good (used), functionality: fully functional, FOR SALE: KIGO CPT-1C-3S Chemical Pre-treatment & Spray Washing Chamber Lrsdpszz I Trofx Ab Ujt For sale is a high-quality, versatile industrial chemical spray washing chamber manufactured by KIGO in 2018 (Model CPT-1C-3S). Designed for cleaning, degreasing, and surface pre-treatment of metal parts prior to coating/painting. The system handles both lighter workpieces via an overhead conveyor and heavier parts via a floor wagon. Key Features & Capabilities: 3-Stage Treatment Process: Stage 1: Degreasing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 2: First Rinsing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 3: Second Rinsing (ambient temperature) Flexible Workpiece Dimensions: Lighter Parts (Overhead Track): Max dimensions: 2,500 x 1,200 x 2,000 mm (L x W x H) Max load capacity: 300 kg Heavier Parts (Floor Wagon): Max dimensions: 1,500 x 1,000 x 1,000 mm (L x W x H) Max load capacity: 1,500 kg Automatic Distribution Wagon: Positioned beneath the chamber floor to automatically direct runoff back to the correct tank, preventing liquid cross-contamination. Pneumatic Doors: Air-operated doors seal the chamber tightly during spray cycles. Heavy-Duty Construction: Tanks and floor made of AISI 304 L stainless steel. Structural frame built with epoxy-painted steel profiles and 50 mm polyurethane insulated panels. Technical Specifications: Manufacturer: KIGO O.E. Model: CPT-1C-3S (Serial Number: 0304-29-FL/PP) Year of Manufacture: 2018 External Dimensions: 7,348 x 3,758 x 4,334 mm (L x W x H) Internal Chamber Dimensions: 3,300 x 1,900 x 2,585 mm (L x W x H) Tank Capacity: 3 x 1,000 liters Pumps: Ebara centrifugal pumps (3 units, 5.5 kW) & Lowara pumps (2 units) Exhaust Fan: Stainless steel vapor extraction fan, 5,000 m³/h capacity (1.5 kW motor) Control System: Central electrical control panel with touch screen interface (ECP-PT07), adjustable spray/drip-off cycle times, automatic refilling, and level sensors. Condition & Documentation: Professional-grade industrial unit built for easy maintenance. Includes complete operation and maintenance manuals along with pneumatic/electrical schematics.

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Please no email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only by prior telephone appointment! Ledpfx Aboz Egflo Uort Subject to changes, prior sale, and errors.

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm Lrodpfx Ajd Dt R Ejb Ujt -Weight: 18.7 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Servo PANEL BENDER FBA 2016 CNC sheet metal bending machines are characterized by high flexibility, efficiency, precision, and a high degree of automation. They are suitable for processing housings, doors, and other components. They are widely used in industries such as kitchen appliances, switchgear cabinets, power electronics, elevators, etc. CNC control: Beckhoff Material and bending capacities Max. bending length: 2000 mm Max. diagonal of the sheet: 2400 mm Max. bending height: 165 mm Min. sheet thickness: 0.5 mm Maximum sheet thickness depending on material type Lrodpfxez Eq Tge Ab Uot Mild steel / carbon steel (410 N/mm²): 2.0 mm Stainless steel (660 N/mm²): 1.2 mm Aluminum alloy (265 N/mm²): 3.0 mm Machine and system data Number of servo axes: 12 Total power: 36 kW Machine weight: approx. 14,000 kg Dimensions (L × W × H): approx. 4.5 × 2.8 × 2.8 m This machine will be exhibited at Euroblech 2026 in Hanover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply are provided by H+S, all from a single source.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2.7552.069, wire diameter (max.): 6 mm, power of the servo motor: 10,000 W, input voltage: 400 V, type of input current: three-phase, We are offering this very well-maintained Wafios BM 3 wire bending machine, manufactured in 1998, for sale. Lrjdjzvdd Aopfx Ab Ujt Tool set for 3 - 6 mm wire is included. Complete documentation is available. The PC has already been replaced. We mainly produced 3D parts from 3 mm wire – brochure holders in all variations. Everyone knows what happens when you maintain the speed after the third bend... distortion. Therefore, this machine operated at a maximum speed of 15%. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Lodpezy Euwofx Ab Uert Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Ljdezc Uu Hepfx Ab Uort

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Lrsdpfxozz H Dpj Ab Uet Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156