Used Beam Welder for sale (5,206)

Condition: used, tank capacity: 1,023 l, GENERAL Equipment: Venting/inlet and outlet, ball valve Design: Container Comments: Frame Fe (galvanized) Speed: 97 rpm Inner diameter: 1,080 mm Total height: 1,950 mm Power: 0.75 kW Agitator: Paddle agitator Support type: Frame Ksdpfx Adoxqbunowedg Location: Bremen Technical documentation: Drawing, installation declaration according to the EC Machinery Directive, assembly instructions Nameplate: Volume: 1,023 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Factory new Cylindrical height: 1,000 mm TANK Max. allowable operating temperature: 80 °C EQUIPMENT Manhole / dome: in upper head, handhole Outlet: DN50 DIN 11851 MATERIAL QUALITY External surface: Mill finish IIIc AGITATOR 1 Voltage: 400 Volt Agitator arrangement: centrally located in the upper head

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: 2 vessels (6169-3+5) with fractured intermediate flange on the gearbox Speed: 26 – 101 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-protected (conformity with applicable ATEX directives under local conditions must be verified) Total height: 4,200 mm Heating/Cooling: available Power: 6.8 kW Max. permissible operating temperature: 60 °C Max. permissible operating overpressure: 10.0 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam-type agitator Base type: Ring Location: Bremen Technical documentation: Drawing, TÜV papers Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Jacket volume: 98.0 liters Cylinder wall thickness: 6.0 mm Jacket material: V2A 1.4541 (AISI304) Product contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,750 mm Last application: Chemical industry VESSEL Max. permissible operating temperature: 60 °C HEATING/COOLING JACKET Kdsdjxqbuhepfx Adwjg Bottom temperature control: Half-pipe coil EQUIPMENT Manhole/dome: in the top head Outlet: flange DN80 Note: minor residues MATERIAL SPECIFICATIONS Foot material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 380/660 volts Current interrupter: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.4 mm Agitator arrangement: centered on the top head Top head wall thickness: 9.0 mm

Condition: used, tank capacity: 8,000 l, GENERAL Kodpfoxqbrmsx Adwsdg Equipment: Crane lugs Design: suspended Remarks: 3 feet made of V2A Speed: 61 rpm Inner diameter: 2,100 mm Total height: 5,500 mm Power: 22 kW Agitator: Beam agitator Support type: Footed (paws/feet) Location: Bremen Nameplate: Volume: 8,000 liters Cylinder wall thickness: 6 mm Product contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,500 mm Last application: chemical industry EQUIPMENT Manhole / Dome: in the top head Outlet: flange DN100 Note: slight adhesions MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Agitator arrangement: centrally in the top head Top head wall thickness: 8 mm

Condition: used, Year of construction: 2000, tank capacity: 6,779 l, GENERAL Design: suspended Year of manufacture: 2000 Remarks: Carrier ring made of Fe Speed: 114 RPM Inner diameter: 1,800 mm Total height: 4,550 mm Power: 37 kW Agitator: Beam agitator Base design: ring cut off Location: Bremen Nameplate: Volume: 6,779 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,200 mm Previous application: chemical industry EQUIPMENT Manhole / Inspection port: in top cover Discharge: flange DN100 Remark: slight adhesions, manhole cover missing Kdodpfx Asxqbp Sodwsg AGITATOR 1 Agitator manufacturer: Fluid Voltage: 400/690 volts Agitator mounting: centralized in upper cover

Condition: used, tank capacity: 17,300 l, GENERAL INFORMATION Design: vertical Notes: 1 vessel (internal ID: 7081-3) with a minor dent and a cut-off connection at the top head Speed: 47 / 95 rpm Internal diameter: 2,900 mm Kodpfx Adexqbmwowedg Explosion protection: Motor is explosion-proof (conformity with applicable ATEX directives under local conditions must be verified) Total height: 5,100 mm Power: 17 / 27 kW Agitator: beam agitator Type of support: feet Location: Bremen Technical documentation: Drawing, TÜV certificates Name plate: Volume: 17,300 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 1,800 mm Previous application: paint industry VESSEL Max. permissible operating temperature: 100 °C Specific gravity of medium: 1.2 (to/m³) Number of feet: 4 units EQUIPMENT Manhole/dome: on top head (DN 600), handhole Remark: Minor residues Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: steel AGITATOR 1 Voltage: 400 V TECHNICAL DATA / DIMENSIONS Bottom thickness: 4 mm Agitator mounting: centered on top head

Condition: used, tank capacity: 17,200 l, GENERAL Design: vertical Remarks: Outlets partially cut off; 1 tank (internal no. 7083-2) with 1 dent in the cylinder Speed: 47 / 95 rpm Internal diameter: 2,508 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 6,000 mm Power: 17 / 27 kW Agitator: Beam agitator Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates Nameplate: Volume: 17,200 liters Cylinder wall thickness: 4.0 mm Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,750 mm Previous application: paint industry TANK Max. permissible operating temperature: 100 °C Specific gravity of medium: 1.2 (t/m³) Number of feet: 4 pcs EQUIPMENT Kdjdoxqbmkspfx Adwjg Manway / Dome: in top head (DN 600), handhole Note: slight adhesions Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: steel AGITATOR 1 Voltage: 400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.5 mm Agitator arrangement: central in top head Top head wall thickness: 4.0 mm

Condition: used, Year of construction: 2002, tank capacity: 8,640 l, GENERAL Features: Ventilation/inlet and outlet, crane lugs Design: vertical Year of manufacture: 2002 Remarks: Agitator shaft cut off; welded bolts on the outside of the tank surface (see photos); 1 pipe inside; cylindrical manway approx. 340 x 440 mm Speed: 14 / 30 rpm Internal diameter: 1,980 mm Total height: 4,200 mm Power: 1.2 / 2.2 kW Agitator: beam agitator Support design: height-adjustable feet Location: Bremen Rating plate: Kjdpjxqbkiefx Adwsdg Volume: 8,640 liters Product-contact material: stainless steel V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,500 mm Last application: lubricant production TANK Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder, in top head (DN 500) Note: slight residues, outlet pipe cut off Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: stainless steel AGITATOR 1 Voltage: 400 V Agitator mounting: centrally in the top head

Condition: used, tank capacity: 6,510 l, GENERAL INFORMATION Design: suspended Remarks: Several connections were modified by the previous operator (not listed in TÜV documents); vessel mounted on 3 feet made of Fe (not on 4 as shown in the drawings); heating coil in cylinder located only in the lower cylinder area; insulation jacket has sheet metal cut-outs and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/Cooling: available Insulation: available Power: 5.5 kW Max. allowable operating temperature: 165 °C Max. allowable operating pressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: blade agitator Support type: feet Location: Bremen Technical documentation: drawing, TÜV certificates Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 litres Double jacket volume: 34.0 litres Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Last application: ethanol VESSEL Max. allowable operating temperature: 165 °C Number of legs: 3 HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: Armaflex Ksdpfsxqbaqox Adwjdg Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in upper head (DN 600) Outlet: flange DN65 Note: light residues AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 V Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator position: centrally located in upper head Upper head wall thickness: 8.0 mm

Condition: used, Year of construction: 2007, tank capacity: 29,000 l, GENERAL INFORMATION Design: vertical Year of manufacture: 2007 Notes: Manhole diameter top head: approx. 700 mm; Manhole diameter shell: approx. 500 mm; Speed: 40 rpm External diameter: 3,200 mm Ksdpfxexqat Ns Adwjdg Internal diameter: 2,980 mm Total height: 6,800 mm Heating/Cooling: available Power: 75 kW Max. pressure: 0.6 bar Agitator type: beam agitator Support type: legs Location: outdoor storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 29,000 liters Double jacket volume: 4,100.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 3,368 mm Last application: adhesive production VESSEL Max. permissible operating temperature: 100 °C Specific medium weight: 1.3 (to/m³) Number of legs: 4 pieces HEATING/COOLING JACKET Bottom heating/cooling: double jacket EQUIPMENT Manhole / dome: in the shell, in the top head Outlet: DN 125 mm AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 Volt Bottom bearing: TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 9 mm Agitator positioning: central, in top head Top head wall thickness: 7 mm

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Design: upright Outer diameter: 890 mm Inner diameter: 650 mm Total height: 2,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Top head: removable / hinged top cover Agitator: beam agitator Support type: feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Kdjdpfxjxqaqne Adwsg Capacity: 550 litres Double jacket capacity: 67.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended use: pharmaceuticals TANK Max. permissible operating temperature: 135 °C Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Baffle: Agitator positioning: centrally mounted in the top cover Agitator details: agitator data not readable

Condition: used, tank capacity: 19,600 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Presumably 3 cooling coils around the cylinder; heating connections have been cut off; a former manhole in the lower cylinder area was welded shut by the previous owner; the tank feet were cut off during dismantling and are now loose (some minor dents; see photos) Outer diameter: 2,900 mm Inner diameter: 2,700 mm Total height: 5,000 mm Heating/cooling: available Insulation: available Max. overpressure: 3.0 bar Agitator: beam agitator Mounting type: height-adjustable feet Location: Bremen Nameplate: Vacuum: 0.9 bar Volume: 19,600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,900 mm Last previous use: dairy VESSEL Number of feet: 4 pcs HEATING/COOLING JACKET Base tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top (DN 500) Outlet: available Note: pressure marks on the insulation jacket, outlet end cut off Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Kodpfxoxqante Adwsdg Agitator manufacturer: Stelzer Bottom bearing: Agitator arrangement: eccentric in the top Agitator equipment: agitator data not legible; motor/gear unit shows signs of corrosion

Condition: used, tank capacity: 5,530 l, GENERAL Features: Spray head, crane lugs Design: vertical Remarks: Double jacket likely with trickle ring – suitable for non-pressurized temperature control only; the welding of the double jacket in the upper area has partially come loose; outlet diameter 65 mm (tapering to approx. 50 mm towards the vessel); minor dents inside the tank; heating connections cut off Speed: 15.5 / 31 rpm External diameter: 1,660 mm Internal diameter: 1,550 mm Overall height: 4,350 mm Heating/cooling: available Power: 0.8 / 1.6 kW Max. overpressure: 3.2 bar Agitator: blade agitator Base type: height-adjustable feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,530 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: dairy TANK Max. permissible operating temperature: 145 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manway / dome: on the top cover (Ø 450 mm) Outlet: present Note: outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Kodoxqamcopfx Adwodg Supply voltage: 380 Volt Bottom bearing: Agitator arrangement: eccentric, on the top cover

Condition: good (used), Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Pallet racking: boltless racking, heavy-duty racking / 34 uprights and 104 crossbeams -Stand depth: 1100 mm -Stand height 4100 mm: 2 pieces Kdedex Ikirjpfx Adwog -Stand height 3500 mm: 13 pieces -Stand height 2000 mm: 19 pieces -Crossbeams, length 2760 mm: 93 pieces -Crossbeams, length 1890 mm: 11 pieces -Dimensions/Quantity: see photo parts list -Submission/Price: complete -Transport dimensions: 6950/2250/H1460 mm Total weight: 4380 kg

Condition: excellent (used), Pressure beam panel saw FIMAL CONCEPT 350 - used - Tiltable up to 46°, extendable angle stop up to 2,500 mm, digital display on the angle stop, mitre stop +/- 50°, automatic cutting length detection, stepless feed of the saw carriage, touchscreen, cutting line laser ----- Technical Data ----- Cutting length: 3,200 mm, Cutting width: 1,300 mm, Max. cutting height: 100 mm, Saw unit feed rate max.: 0 - 40 m/min., Main saw motor output: 5 kW, Main saw blade Ø: 350 mm, Dust extraction port (bottom) Ø: 120 mm, Dust extraction port (pressure beam) Ø: 100 mm, Compressed air connection: 7 bar Quality Info: - complete basic inspection Kjdjxdl N Aopfx Adwsdg - complete basic cleaning - electrics checked - immediately operational

Condition: refurbished (used), functionality: fully functional, type of cooling: air, welding current (max.): 385 A, Migatronic MigMan 385 – Gas-cooled MIG Note: This is a Trade-in. Profesionally refurbished, tested, and ready-to-weld. Suitable for: Daily workshop welding, General maintenance, Agriculture. Not suitable for: Kodpox S Hahofx Adwedg Continuous production welding Specs: 385 Ampère 400 Volt 24 Steps adjustable 4 Roller drive 2/4 Step Spot welding Pre gas, burnbacktime adjustable Including: Mig Welding torch, earth work cable with clamp, and interconnection hose. Indicative new price at the time of introduction €7500 Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Trolley Beam Punching Machine / Trolley Beam Punch Sandt Type 530 - Used Machine Punching force: 30 tons Table size: 1600x500 mm Trolley size: 500x500 mm Kodpfxox Sdzpo Adwjdg Used, overhauled machine

Condition: good (used), Here we offer a laser beam source from Coherent with PC. Name: AVIA 355-X Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355nm Ksdpfjdmzhqex Adwsdg Excitation: diode pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Condition: excellent (used), Coherent Type: 205 F Laser beam source from Coherent COMPex Pro Compact, easy-to-integrate excimer laser. COMPex excimer lasers are highly effective light sources, with a compact design and easy installation and operation. They deliver excellent results in demanding applications, such as solid sampling systems (LA-ICPMS), materials research (PLD) and precise material processing. With ceramic pre-ionization, the COMPex offers output power of several hundred millijoules plus unmatched pulse-to-pulse stability. The COMPex also comes with an improved gas processor that extends the lifetime of both the gas and the optics. Applications • PLD – Pulsed Laser Deposition • Thin wafer processing • Laser lift-off/debonding • LA-ICP-MS Pulse energy1 (mJ) Wavelength 400 Max. repetition rate 50 Hz Electrical: 230 V AC, 16 A, 50/60 Hz switchable, 1-phase Dimensions L x W x H 1658 x 375 x 813 mm³ Weight: 325 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) Kedevx Sz Eopfx Adwsdg We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a laser beam source from Coherent. Designation: AVIA 355-X Operating hours: Diodes 43022/43022, Head 42955 Crystal Shifter: 1845.91 hours Wavelength: 355nm Excitation: diode pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Kdedpfxeihp Are Adwog Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence :

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser beam source with KLH cooler The Trumpf TruDisk 4002 laser beam source is an industrial disk laser source (disk laser) from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of a beam source with associated cooler, but without optics and fiber optic cable. Technical Specifications Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10% ... 460 V +10%, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical Features: Water-to-water cooling Precise temperature control (typically 20–25°C) Refrigerant: R 404A Can be controlled via TRUMPF interface Required to comply with laser specifications Device Type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Kdedpfewh Rnzsx Adwsg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: used, machine/vehicle number: 007486, Max. panel width: 2100 mm Kdsdpfet Sn Azox Adweg Max. panel length: 4300 mm Main saw blade projection: 135 mm

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition Kdjdpfeq A I Upjx Adweg

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes Kjdpoiiiuyefx Adwjdg

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes Kdsdpfxjwuz Dyj Adwog

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Control (CADmatic 4.1 - Professional) Kjdod Nt N Uspfx Adwodg Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 OPTIONAL: No. 1 Printer for labels Optimizing Software Schnitt Profi(t) Practive