Used Belle Bwr 650 for sale (6,249)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle Iedpfxexxlhns Ab Iea This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: used, mileage: 1,49,700 km, power: 488 kW (663.49 HP), first registration: 10/2022, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, maximum load weight: 10,145 kg, empty load weight: 15,780 kg, tire size: 385/65R22,5, next inspection (TÜV): 10/2025, wheelbase: 3,900 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 2,550 mm, total width: 4,000 mm, total height: 8,100 mm, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of seats: 2, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, truck registration, | VOLVO FH16 650 with Palfinger Epsilon S260Z96 | 2 extensions | I-Shift, retarder | Automatic, adaptive cruise control, emergency brake assistant, | Turning assistant, | Full-leather interior, leather steering wheel, | Air conditioning, multifunction steering wheel, cruise control, | On-board computer | 3rd axle lift | Rear overhang: 140cm | Wheelbase 3,900mm | Technically permissible max. axle loads: 1. 10,000kg 2. 10,500kg 3. 10,500kg | Technically permissible total weight when loaded in vehicle combination: 70,000kg | TÜV until 06/25 Seller: Christopher Glock German/English Mobile: Whatsapp) Mail: christopher. Entirestock/Complete stock at: Hofgasse25, A-4063 Hörsching | Errors, input and advance sales reserved. |Sales only to commercial customers | Trailer from Doll Type: M2K-9L Fin: 46110 | Wheelbase: 260cm | L/W/H in cm: 430/255/400 | Own weight: 3,370kg | Payload: 14,630 | Technically permissible max. axle loads: 1. 10,000kg 2. 10,000kg | Tires: 275/70 R22.5 on X-Lite aluminum rims | 2 single axles, make BPW, 10 t with disc brakes | Electronically controlled 2-line compressed air braking system | Weight via CAN bus to the truck display. | Stool model IX hydraulic steering with two double-acting cylinders between the stool and the front axle bogie (no Ratioplus) | 1x hydraulically extendable stanchions - hydraulic bolster lock | Connecting cables for 14m and 16m bolster stand | LED trunk end lighting with cable reel approx. 12m | Sockets: 15-pin socket for lighting/16-pin socket for control/7-pin EBS socket/7-pin socket for overlength lighting Iodpfxexvxr Ij Ab Isa

Condition: excellent (used), Year of construction: 1999, Engel ES 650/150 HL Isdsxy Ak Nopfx Ab Ioa Clamping force: 150 tons Year of manufacture: 1999 Screw diameter: 45 mm

Condition: new, functionality: fully functional, Conveyor Belt EP 650/3 – 800 mm – 6+3 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following technical specifications: Width: 800 mm Type: EP 650/3 Polyester/Polyamide fabric plies Tensile strength: 650 N/mm Construction: 3 fabric plies Cover plates: 6 mm top / 3 mm bottom Rubber quality: 15 MPa (standard industrial grade, wear-resistant) Material: PE/PA Condition: New / unused Length: 196 m Applications Ijdpfx Abjxy Nr Te Iea Ideal for use in: Quarries & gravel plants Recycling facilities Agriculture General industry and conveying technology Advantages High tear resistance Durable covers Good abrasion resistance Suitable for medium to heavy-duty conveying tasks

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Isdpfoxzi D Ssx Ab Isa Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Isdpfxexcwxgo Ab Isa Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Isdpoxwl T Uofx Ab Ioa Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: excellent (used), Year of construction: 2008, operating hours: 59,934 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 1.525 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,860 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503240 manufacturer: ENGEL type: Victory 650-120 tech controller: EC200 A02 year of construction: 2008 operation hours: 59934 h clamping force: 1200 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 507 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 1525 bar Isdpfxsxwvdks Ab Isa equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 8x measures of machine l x w x h: 4.86m x 1.5m x 2.1m total weight: 7600KG

Condition: good (used), Year of construction: 2017, operating hours: 2,022 h, load capacity: 3,100 kg, lifting height: 1,000 mm, fuel type: electric, mast type: simplex, construction height: 2,150 mm, Manufacturer + model: JUNGHEINRICH EJC-B 31 Mast: 1F1000 ID: 23041.2562 Category: Used Mast: 1F1000 Lowered height: 2150 mm Lifting height: 1000 mm Iodpfx Asxz T Dvsb Iea Capacity: 3100 kg Year: 2017 Hours: 2022 hours Battery: 24 V / 300 Ah - GEL - Year 2021 Options: VERY unique WIDE TRACK!!! - LIFTING CAPACITY 3100 KG @ 650 MM - equipped with S.s (very unique!!) - PROPORTIONAL lift & lower valves - with free-standing, adjustable forklift forks - SUITABLE for all types of pallets - Width between support legs 1160 MM!!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: CCR-650, Purpose • Designed for efficiently removing the core from various vegetables, specifically Chinese cabbage and cabbage. Features • Manual Feeding Mechanism: The machine operates with manual feeding, allowing it to accommodate vegetables of varying diameters. By aligning the vegetable with the center of the blade, the core is effectively and consistently removed. • Efficiency: Engineered to quickly and efficiently remove cabbage cores, enhancing productivity in food processing environments. • Consistency: Provides uniform results by automating the core removal process, ensuring that each piece of cabbage is prepared consistently. • Labor Savings: Reduces the need for manual labor in core removal, allowing staff to focus on other tasks and improving overall workflow. • Commercial and Industrial Application: Ideal for use in commercial kitchens, food processing plants, and other industrial settings where large volumes of cabbage are processed. • Precision: Designed for precise core removal, minimizing waste and maximizing the usable portions of the vegetable. • Usage Iodpfxst Av Hvs Ab Iea • Primarily utilized in commercial or industrial kitchens where large quantities of cabbage and similar vegetables need to be cored efficiently for use in various dishes and food products. • Additional Considerations • When selecting a cabbage core remover, it's crucial to assess the specific requirements of the kitchen or processing facility. Different models may offer various capacities, features, and levels of automation to meet diverse operational needs.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Iedoxzgkijpfx Ab Ioa Coolant System

Condition: good (used), travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Manufacturer: EMCO Type: MAXXMILL 500 new 2014 Control system: SIEMENS 840D Year of construction: 2014 High preformance spindle 34,5 kW and 110 Nm torq One setup to machine 500 x 500 x 475 mm (5 sides) Top machine for medium production runs 15 to 300 pieces 3560 Spindle hours Specifications Metric US Standard X - axis 650 mm Y - axis 550 mm Z - axis 500 mm A - axis -100 to +100 ° B - axis 360.000 ° Table length 600 mm Table width 600 mm Table load 250 Feed X - axis 30000 mm/min. Feed Y-axis 30000 mm/min. Feed Z-axis 30000 mm/min. Tool holder ISO 40 ISO/Bt/Mk Isdetw Rnfopfx Ab Ioa Spindle power 34 kW kW Spindle speed 10000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) Length 2900 mm width 3300 mm height 3000 mm weight 9200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, overall weight: 2,000 kg, total length: 4,000 mm, total width: 3,000 mm, total height: 1,500 mm, Slitter Rewinder, can be used with a contact roller rewinding system or as a standard non-contact rewinder, depending on the substrate and required web tension. - In use until 2000, then comprehensively modernized - Modified electrical control equipment with Siemens S7 PLC - Modified winding drives with Commander SE CT control, both individually adjustable - Reversible drive direction for winding drives - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding with pneumatic detection - Max. rewind diameter 500 mm; 2 pcs. 3" rewind shafts - Max. unwind diameter 1000 mm; 1 pc. 3" unwind shaft - Pneumatically controlled unwind brake - Slitting system: circular knives (3 units available) - Running metre counter Hengstler - Main drive, electrically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Software file for Siemens S7 PLC available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar - Suitable for paper, film, aluminium etc. - Required space at least 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging: • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions of unwinder (without slitting unit): • Width: 170 cm • Length: 220 cm • Height: 110 cm • Weight: 490 kg - Dimensions of slitting unit (without unwinder): • Width: 230 cm • Length: 140 cm • Height: 140 cm • Weight: 1490 kg - Control panel (including accessories): • Width: 70 cm • Length: 120 cm • Height: 120 cm Iedpfxsxbyf Hs Ab Iea • Weight: 240 kg

Condition: excellent (used), Year of construction: 2002, Main functions of the machine: Iodoxy R Tlopfx Ab Ija Previously used for sealing and shrinking pharmaceutical products in cartons, in a cleanroom environment. Manufacturer: KALLFASS GmbH & Co, Germany Year of manufacture: 2002 Infeed conveyor dimensions: 1000 x 400 mm Fully automatic side sealer, model Universa 400 Standard Roller conveyors Needle and pinch perforation Fault detection Infinitely variable speed control: 0–35 m/min Shrink tunnel, model Compact 650 S Roller conveyors Automatic cooling system Outfeed conveyor dimensions: 2000 x 400 mm Frequency inverter/speed control Electrical connection: 3 x 400 / 230 volts, 50/60 Hz Connected load: 14.5 + 6.0 kVA Total current: 29.6 A Main fuse: 40 A Control voltage: 24 V Dimensions: approx. 6.2 x 2.1 x 1.4 m (H) CE certified Condition: Pre-owned In very good, clean condition according to the current operator The current operators report stable and reliable shrinking behaviour Original price in 2002: CHF 200,000 Availability: Immediately Prices in EUR, ex works floor (Switzerland), excluding Swiss VAT; Swiss VAT not applicable on export from Switzerland.

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Isdexzc Udspfx Ab Ioa Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 100 mm -Conveyor length: 650 mm Isdpfx Ajxu El Sob Iea -Drive shaft: Ø 30 x 100 mm -Dimensions: 650/520/H250 mm -Weight: 51 kg

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: Iodpfx Abotk H N Ts Ija - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: good (used), Year of construction: 2008, Robot Specification – for Injection Molding Machines (Sepro Type) Payload Capacity: 1. Max load: 10 kg Working Envelope: 1. X-axis stroke: 1500 mm 2. Y-axis stroke: 650 mm 3. Z-axis stroke: 1200 mm Robot Dimensions (L × W × H): 1. 2490 × 1505 × 2125 mm Weight: 1. Robot: 305 kg 2. Electrical control box: 110 kg 3. Box dimensions: 600 × 400 × 1200 mm Suitable for Injection Molding Machines: 1. Clamping force range: 150 – 350 tons Iedsu It Dqopfx Ab Ioa Link to Sepro Reference Catalog:

Condition: reconditioned (used), functionality: fully functional, conveyor belt width: 650 mm, warranty duration: 3 months, total width: 2,210 mm, total length: 1,235 mm, total height: 1,380 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 12/2027, year of last overhaul: 2025, opening width: 45 mm, Fritsch Rollfix easy Model: 50WK650 Rollfix Dough sheeter with left-hand extension table Suitable for all dough types, for sheeting and laminating Stainless steel construction Isdpfxer Eni Us Ab Isa Electric flour duster with programmable control Robust technology Long-roller table below with pressure plate with take-off belt for long roller operation Infinitely variable roller adjustment New belts and scrapers Machine is mobile Connection: 400V, 16A CEE plug Refurbished used machine with warranty and service Option: Maintenance contract Delivery service Many more TOP sheeters in stock!

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: FANUC, controller model: Series 21i-MB, table load: 1,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15 W, BRAND: DAEWOO MODEL: MYNX 650 CATEGORY: VERTICAL MACHINING CENTRES YEAR OF MANUFACTURE: 08/2004 CNC CONTROL: FANUC SERIES 21i-MB MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: Length: 4,110 mm / Width: 3,190 mm / Height: 3,100 mm Spindle: Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): 11/15 kW Working Capacity: X-axis: 1,300 mm Y-axis: 650 mm Z-axis: 625 mm Isdpfxoxxlifs Ab Ija Distance spindle centre–table top: 75 / 775 mm Distance spindle nose–table centre: 150 / 775 mm Table: Table size: 1,400 x 650 mm Table load capacity: 1,000 kg Feed Rates: Rapid traverse X / Y axes: 24,000 mm/min Rapid traverse Z axis: 20,000 mm/min Cutting feedrate X/Y/Z axes (linear interpolation): max. 8,000 mm/min Tool Changer: Tool taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Max. adjacent tool diameter: Ø 90 mm Max. alternate tool diameter: Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Other: Manuals, electrical diagrams, and CE Declaration Chip conveyor, coolant tank (300 L) Automatic high-pressure cooling system through the spindle line at 20 bar Transformer MACHINE OVERHAULS PERFORMED: - New Y-axis ball screw, including bearing replacement - X-axis ball screw overhauled, including bearing replacement - Complete overhaul of anti-friction material (Turcite B) on X and Y axes - Complete spindle line overhaul with belt, seal, and bearing replacement - Complete replacement of X and Y axis lubrication system - Complete internal repainting and Lexan replacement - Full overhaul of telescopic covers on X/Y/Z axes

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DETAILED PHOTOS AND VIDEO AVAILABLE ON DRIVE, PLEASE CONTACT ME VIA SMS TO RECEIVE THEM. PLEASE DO NOT MESSAGE VIA OLX, ONLY CALL OR EMAIL. TECHNICAL SPECIFICATIONS: Manufacturer: BRANDT Model: KDF 650 Year of manufacture: 2011 Condition: Used, in very good condition Edge band thickness: 0.4-3 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Maximum edge height: 60 mm Maximum power consumption: 21 kW Machine dimensions: height 2300 mm, depth 1550 mm, length 5800 mm Weight: 2600 kg Power supply: 230V/400V EQUIPMENT: - Electrically operated infeed fence - Rare, automatic edge feeding system - Pre-milling unit - Glue application unit - Pressure roller unit Iedpfxoxuu N Hj Ab Iea - End trimming unit (straight and angled) - Top/bottom trimming unit - Corner rounding unit - Profile scraper - Flat scraper - Buffing unit - 3 units for spraying anti-adhesive fluids TECHNICAL CONDITION: - Machine is fully operational and currently in use - Regularly serviced by authorized service - Ready for immediate operation - Low operating hours PRICE: 135,000 PLN net (negotiable), VAT invoice will be issued LOCATION: Bochnia, Poland TRANSPORT: Collection by the buyer

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Iedpjwuz Dysfx Ab Isa Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes

Condition: excellent (used), Year of construction: 1996, Engel ES 3550/650 Clamping force 650 t Ijdpfsxvmmyex Ab Isa Clamping force up to 725 t Year 1996 Tie bar distance 102.5 x 92.5 cm Screw diameter 90 mm Shot weight 2400 g Shot weight 2230 g Tie bar spacing 92.5 x 102.5 cm

Condition: new, Year of construction: 2025, table width: 450 mm, table length: 900 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, number of spindles: 1, VMC 650 CNC machining center, milling machine with CNC system Iedpfxexc I Dgj Ab Isa VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, total width: 3,100 mm, total length: 1,175 mm, total height: 1,280 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 12/2027, electrical fuse: 16 A, opening width: 45 mm, working width: 650 mm, Dough Sheeter / Dough Rolling Machine Model: Laminato 650 Proven, advanced technology – tried and tested many times! Simple manual operation With hand and foot controls Digital display / LED indicator Suitable for all doughs for rolling and laminating Tables fold up for space-saving storage Tables with plastic conveyor belts Rolling thickness adjustable from 0.2 to 50 mm Rolling width up to 650 mm Belt length: 2 x 1320 mm Dimensions in working position: 3100 x 1170 x 1249 mm (LxWxH) Ijdjuyx I Eepfx Ab Isa Dimensions in resting position: 1430 x 1170 x 2070 mm (LxWxH) Floor-standing, mobile machine Only here: DGUV V3 safety tested Connection: 400V, 1.1 kW, 16A CEE plug Brand new machine 24 months warranty plus spare parts service Options: Delivery service Leasing & rental service Tray carrier for rolled products Felt belt Belt cleaning system Flour catch trays under the tables Maintenance contract Service package We have a large selection of dough sheeters in stock for immediate delivery!