Used Bending Flange for sale (4,553)

Condition: used, Year of construction: 1999, tube diameter 12-54 mm (Kupfer / Edels. mm Bwsdpfjumyhljx Abzsw serial number EBD mode of operation Schneiden/ Entgraden / Re speed Rollen 450 U/min m/min

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 6713-2023-2009, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, total length: 6,500 mm, total width: 1,000 mm, total height: 1,400 mm, power: 5.2 kW (7.07 HP), Tube bending machine Gelber Bieger Type: S03-60 Year of manufacture: 2009 Diameter: 03-60mm Length: 6m Electromechanical drive of the bending axis PLC control Bending angle resolution: 0.1° Electronic length and torsion measurement Manual stop system with overrun stops Torsion indexing: 15° increments Hydraulic tube clamping with adjustable clamping pressure Programmable mandrel retraction Three-jaw chuck Reinforced mandrel support extension up to 6m Tube bending software Including tooling for the following diameters: 50mm, 42.5mm, 40mm, 35mm, 30mm, 25mm, 20mm Collection ex works, unpacked Bsdpexuii Uofx Abzeww

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Bjdpfx Absu Itlnozoww Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Siemens PLC control system with touchscreen user interface

Condition: used, tank capacity: 1,813 l, GENERAL Design: upright Internal diameter: 1,195 mm Total height: 2,600 mm Max. overpressure: 1.0 bar Agitator: agitator flange Type of support: feet Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 1,813 liters Wall thickness, cylinder: 4.2 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,260 mm Previous application: chemical industry TANK Max. operating temperature / °C: 100 °C Number of feet: 4 pcs EQUIPMENT Manhole / dome: in the top head Outlet: available Remark: minor adhesions MATERIAL SPECIFICATION Feet material: steel AGITATOR Bedpfxexqdrve Abzjww Baffle: Agitator positioning: eccentric in the top head TECHNICAL DATA / DIMENSIONS Wall thickness, heads: 4.7 mm

Condition: good (used), Good day, we are offering here a set from a private purchase: Folding machine Schechtl KS 200 - 1mm - 2m Guillotine shear Schechtl HT 200 - 1.25mm - 2m Back gauge 500mm Segment folding machine Schechtl UK 100 S 1.5mm The equipment was purchased from a private individual; all machines are in good and ready-to-use condition. If additional accessories are required, there is a wide selection available on site – from back gauge to tube bars or beading tools, Eckold hand tools, etc. Bsdpfx Absxuu Hxszsww

Year of construction: 2010, condition: ready for operation (used), This PROMAU MCA 2017 roll bending machine was manufactured in 2010. It features a plate width of 2050 mm, rolling thickness up to 6 mm, and pre-bending thickness of 5 mm. Equipped with a centralized control console, hydraulic drive on side rolls, and a full safety system, it ensures precision and safety. Consider the opportunity to buy this PROMAU MCA 2017 roll bending machine. Contact us for more information. Bjdpfxexirkdo Abzeww Application Types Bending

Condition: used, Year of construction: 1984, ja Bwjdpfx Aou Uvfzobzow positioning automatic ja documentation ja ja

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Bwodpfx Abexpqy Djzew Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: good (used), functionality: fully functional, HYLLUS BENDING MACHINE Bwjdpfjxf Hrhox Abzjw FOR TIN WORKERS 3050 X 2 ART 290 OL USED MACHINE INTERNAL CODE: SVR 308

Condition: used, tank capacity: 10,000 l, GENERAL Design: upright Bwedpfxexqca Se Abzow Remarks: Minor differences in design, e.g., outlets; rectangular opening approx. 600 x 600 mm in the top head; various small rust spots on the outside (see photos); 2 vessels with a dent in the cylinder; some fittings on the top head are bent Internal diameter: 2,200 mm Total height: 3,900 mm Top head: flat head Agitator: agitator flange Mounting type: feet Location: Bremen Nameplate: Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,750 mm Previous use: detergent production VESSEL Number of feet: 4 pcs EQUIPMENT Outlet: available Remark: slight residues MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Agitator arrangement: mounted laterally on the cylinder

Condition: ready for operation (used), Year of construction: 2020, Shaft bottom/top: 30mm/30mm, max. round tube length: 48mm, max. round tube diameter: 3mm, max. flat bar dimensions X/Y: 50mm/10mm, max. square tube dimensions X/Y/Z: 40mm/30mm/3mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Bwsdpfsxt Rmrsx Abzsw

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec Bsdpfxefg Eu Us Abzjww • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: used, Year of construction: 1999, tube diameter bis 60 mm Bwsdpfx Abovvnm Sjzow weight of the machine ca. 1,8 t

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine Bwjdpfsxabkbjx Abzew * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Distance between rollers: 97 mm Digital readout Roller diameter: 128 mm Mandrel diameter: 30 mm Mandrel length: 75 mm Rotational speed: 8.5 rpm Bwsdpfxjxuk Tzo Abzsw Working height: 885 mm Motor power: 0.75 kW Voltage: 380 V Weight: 187 kg

Condition: used, GENERAL Bedpfx Aboxqbznozjww Miscellaneous: - Agitator flange DN 150 / 168.3 DIN 2633 PN 16 - Mounting flange DN 250 Location: Bremen Product-contact material: V4A 1.4571 (AISI316) Condition: used

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Bwedsxurpwjpfx Abzjw Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Bwjdpfx Absxnr Erezjw Application Types Bending

Condition: used, Year of construction: 2017, Used bending press in good condition Specification: Model: Toskar Maestro Bsdoq Ulxkjpfx Abzsww Year: 2017 Bending capacity: 40 tonnes Working length: 2100 mm Axles: Y1-Y2-X Tools: available Protection: Laser bending zone Made in: Turkey If you have any further questions, we will be happy to answer.

Condition: new, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Bwjdpsw U U Udofx Abzow Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: Bodpfx Abjxh D Nvezoww - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: ready for operation (used), total length: 9,000 mm, total width: 4,300 mm, total height: 3,050 mm, empty load weight: 1,90,000 kg, top side rolls hydraulicaly driven 110 HP on top roll Extra top roll included, dia 660 mm Hardened rolls treated with 50-NI-CR-No 7 Clamping force: 1000 ton Conical bending Electro mechanical control Max open between rolls: 205 mm Foundation needed: 10 500 x 5300 x 2400 mm Number of rolls: 4 Roll capacity cold: 3100 x 125 mm Roll capacity warm: 3100 x 180 mm Type: hydraulic Roll dia upside: 850 mm Bedpfx Asxqh S Tsbzjww Dia under roll - side rolls: 850 mm - 720 mm Driven rolls: 3 driven rolls Power needed: 230 HP total

Condition: ready for operation (used), nominal power: 201.153 kW (273.49 HP), 3 cardan driven rolls, therefore no slipping/skidding and also ideal for conical rolling - Digital readout - Electromagnetic clutch - 2 speeds (variable) 3 + 6 m/min - Engine: 220 HP/PK; 160 kWt - Rolling capacity: warm: upto 230mm - Rolling capacity: cold: 120mm - 2 liftingsystems included - Spare upper roll included of dia 700 mm - Has the option of section bending, axle dia: 320 mm!! Number of rolls: 3 Roll capacity cold: 4100 x 120 mm Roll dia upside: 900 mm Bwedpexqh S Hefx Abzjw Dia under roll - side rolls: 850 mm

Condition: ready for operation (used), total length: 1,850 mm, total width: 700 mm, total height: 1,200 mm, empty load weight: 520 kg, nominal power: 1.1 kW (1.50 HP), conische buiging Number of rolls: 3x Bjdpfx Asxqh Tdebzjww Roll capacity cold: 1270 x 3 mm Roll dia upside: 90 mm

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conical bending with hardened rolls with motorized backroll Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Bsdpjxqh Tksfx Abzoww Roll dia upside: 140 mm