Used Bevel Gear Tester for sale (7,850)

Year of construction: 1981, condition: ready for operation (used), A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible. Nsdpfx Aezrn Nbshnjlf

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Nodpfozkvvysx Ahnelf Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: used, Year of construction: 1986, brinell hardness 2.802.007 test load capacity 750 kN Nledpfx Ahoyan Smjnjf throat 200 mm checking height 14 mm Control Stiefelmayer weight of the machine ca. 620 kg dimensions of the machine ca. 360x840x1250 mm Version A, size 1 Test force: 750 kN Type of force application: Spring force load kN Preload: max. 300 kN Load capacity: 200 mm Test height: 14 mm Voltage: 380/220 V Power type: 50 Hz Accessories and special equipment: - Brinell-Vickers hardness testing electronics, type 2.802.007 - Anti-glare screen for frosted glass device Space requirements: 360 x 840 x 1250 mm Weight approx. 620 kg

Condition: used, Year of construction: 1982, test force 588,613,980,147 N checking height 250 mm throat 150 mm Nlodeyan Nropfx Ahnsf weight of the machine ca. 100 kg dimensions of the machine ca. 460 x 210 x 840 mm ype of force: Spring force load Preload: 98 kN Stroke: 150 mm Test height: 250 mm Test force: 588 N, 613 N, 980 N, 1471 N, 2450 N Voltage: 220 V Current type: 50 Hz Accessories and special equipment: - Holder with diamond cone 120 degrees - Hardness comparison plate HRC - Holder with carbide ball 2.5 mm diameter - Hardness comparison plate HR 2.5/187.5 - Test table 190 mm diameter - Prismatic test table for max. 85 mm diameter - Protective cover - Machine table with drawer Space requirement: 460 x 210 x 840 mm Weight: approx. 100 kg

Condition: as good as new (ex-display), Year of construction: 2025, direct-drive Screw compressor ALMIG GEAR XP 22 - 10 bar (air cooled) Year 2025 Time of delivery: 3 weeks Technical specifications Type: GEAR XP 22 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 3.20 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Nedpfjd Dpvfox Ahnjlf Rated power drive motor: 22 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 73 dB (A) Length: 1250 mm Width: 880 mm Height: 1515 mm Weight: 670 kg Compressed air connection: G 3/4 "

Condition: as good as new (ex-display), Year of construction: 2021, Screw compressor ALMIG GEAR XP 75 - 8 bar (air cooled) Year 2021 / IMMEDIATELY AVAILABLE! Nljdpfoxw T Slox Ahnef Technical specifications Type: GEAR XP 75 Operating pressure: 8 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 12,80 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 75 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 76 dB (A) Length: 2180 mm Width: 1330 mm Height: 1850 mm Weight: 2025 kg Compressed air connection: G 2 "

Condition: ready for operation (used), Gearmotor, gear unit Nledpsukn Insfx Ahnof Dimensions: 930 x 410 x 390 mm Weight: 196 kg Electrical data: 400 V; 29.5 A; 15 kW Gear unit speed: 182 rpm Motor speed: 1460 rpm

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 10 min. module 0,5 Control Siemens Sinumerik 840D weight of the machine ca. 9,5 t Nodoyan Nfopfx Ahnelf dimensions of the machine ca. 3800x2600x2550 mm Maximum wheel diameter: 275 mm Module +: 10Module -: 0.5 CNC control Max. spindle speeds: 1200 rpm Max. wheel width: 58 mm

Year of construction: 1979, condition: excellent (used), functionality: fully functional, ALLGAIER gear box 62/8102 suitable for BIHLER RM 40 Nlodpfx Aou Dbb Aehnef

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Boehringer-Sturm- Variator-gear-box model D 57 ZK Input speed: 1.500/min. Nledpfx Ahew D T Sbenof Output speed: 0 - 1.320/min.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, suitable for BIHLER GRM 80, BIHLER GRM 100 and BIHLER MACH 05, tested. Nledpsd H T Tcjfx Ahnsf

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Nlsdpfx Aoyucd Hohnsf Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: ready for operation (used), Max. Gear Diameter: Approx. 100 – 110 mm Max. Rack Length: 1460 mm Max. Stroke Length: 55 mm Max. Module: 5 Stroke Rate: Nodsy R Sxtepfx Ahnolf Clamping Table Size: 160 x 1550 mm Spindle Diameter: Approx. 70 mm (Tool bore diameter ø44.45 mm)

Condition: ready for operation (used), thread length: 3,000 mm, Maximum spindle bore is Ø 80 mm. The possible diameter from the traverse path is max. Ø 250 mm and min. Ø 20 mm. Machining length: 3000 mm. Comes with accessories: change gears, steady rest. For further technical data, please refer to the PDF file. Nljdpsv Huihjfx Ahnjf

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Njdpfxoyfnlko Ahnelf Dressing device Grinding stones Turbo separator

Year of construction: 1991, condition: good (used), Ref. -No.: 10656 Manufacturer: PFAUTER Type: PE 150 Year of construction: 1991 Type of control: CNC Control: Sinumerik 840 Storage location: Halberstadt Country of origin: Germany Turning Speeds: 150 - 600 RPM Tool Taper: SK 40 Nsdpfxozkpx Uj Ahnjlf Machine length: 4700 mm Machine width: 3600 mm Machine Height: 2800 mm Weight: 8 t Workpiece Diameter: 150 mm Maximum tooth width.: 150 - 200 mm Table diameter: 160 mm Table drilling: 63 mm Max. cutter diameter: 130 mm Max. cutter length: 220 mm swivel angle: +/- 45° Further information: - The machine has been completely converted to Siemens 840D, including the motors and control cabinet. - The milling head was completely overhauled by Pfauter in 2013. - The low-voltage system and magazine conveyor are included. - It is equipped with a deburring station. The machine can be viewed while powered on by prior arrangement.

Condition: new, functionality: fully functional, machine/vehicle number: 5002150, power: 0.37 kW (0.50 HP), rotational speed (min.): 1,380 rpm, rotational speed (max.): 275 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, protection type (IP code): IP54, This geared motor is a powerful frequency inverter designed for precise control of electric motors. With a compact design and high efficiency, this model is ideal for applications in automation technology. Outstanding features include an integrated safety function that enables reliable monitoring and control, as well as a user-friendly interface for easy programming and customization. The frequency inverter supports various communication protocols, which ensures seamless integration into existing systems. It also offers high application flexibility, making it suitable for both simple and complex drive solutions. Nsdouu Rzxopfx Ahnolf

Condition: new, functionality: fully functional, machine/vehicle number: 01.7246421503.0001.15, power: 0.18 kW (0.24 HP), rotational speed (max.): 900 rpm, input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 7 kg, torque: 335 Nm, type of cooling: air, protection type (IP code): IP54, This SEW geared motor is a powerful frequency inverter that combines a compact design with high performance and efficiency. It has been developed for precise control of electric motors. This motor is ideal for applications that require a reliable drive solution. With a robust design and high-quality materials, it ensures a long service life and low maintenance costs. The integrated gear unit ensures optimum torque transmission and enables precise control of the drive speed. Thanks to its flexible mounting options and high adaptability, the SEW geared motor is the perfect choice for industrial applications in various fields, from conveyor technology to mechanical engineering. Nedjuu Rx Djpfx Ahnjlf

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. Nsdpfx Ahjt Hww Djnjlf * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm max. module 34 min. module 1 Nedpfx Aet Hw Aashnslf total power requirement ca. 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Nsdpfst Hwqqox Ahnolf Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Nlodpfx Ahet Hwruenef Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: used, Year of construction: 1996, workpiece diameter 240 mm centre distance 0 mm honing length max. 500 mm max. module 5 total power requirement 12 kW Nljdpfx Ahet Hwvmjnef weight of the machine ca. 5000 kg dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: Nodpsxvdrysfx Ahnjlf • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm Nljdpfet Hw D Rjx Ahnsf gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.