Used Bevel Gear Tester for sale (14,086)

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Pedpoxyadtefx Ab Ijrd Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Podpsxylm Hsfx Ab Ierd Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: ready for operation (used), TOS Gear Hobbing Machine FO16 Maximum wheel diameter: 1,600 mm Gear width: 560 mm Maximum module: 16 Maximum workpiece weight: 7,000 kg Table surface area: 1,350 mm Turning speed range: 16–80 rpm Feeds – axial: 0.05–1.5 mm/min Feeds – radial: 0.25–6 mm/min Feeds – tangential: 0.13–4 mm/min Electrics – voltage/frequency: 380/50 V/Hz Total power requirement: 12 kW Predpfxoxwl R Ts Ab Isd Machine weight approx.: 18.5 t Machine dimensions approx.: 4.3 x 2.0 x 3.2 m The machine includes one additional head, change gears, and arbors. Video of the machine under power available.

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm gear width: 20 mm max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW Podpfx Abjxxl Sgj Isrd weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Condition: excellent (used), Diameter: 800mm Module: 10 Prodpfoxv Sbpex Ab Ied

Condition: excellent (used), Year of construction: 2011, operating hours: 74,533 h, functionality: fully functional, LIEBHERR LC-380 (2011) – 6/7-Axis CNC Gear Hobbing Machine MARCH 2025 Service Report from LIEBHERR included in the documentation Ø 380 mm | Module up to 7 (hobbing) / 9 (profile grinding/milling) | 600 mm face width | Siemens 840D sl Very well-equipped, late 2011 model (s/n FN9014) with special filtration for non-ferrous metals. Wet or dry machining possible; includes oil/media cooler, paper band filter, extensive hobbing arbors and accessories. The machine is fully enclosed and described as being in very well-maintained condition. Psdpfx Absxlz Nbs Ijrd Equipment & Options: - Siemens 840D sl CNC with hand-held control unit (teach) - Full enclosure, table clamping - Tangential hobbing device for high accuracy - Measurement system for A-axis swivel accuracy - Device for single-track measurement/spindle approach & probing function - Programmable tailstock - Paper band filter for non-ferrous material, scraper chip conveyor - Oil cooler, English language option - Several hobbing arbors/mandrels, HSK-A50 interface - Complete set of books & manuals Technical Data: - Max. gear diameter: 380 mm - Min./Max. center distance: 15 / 400 mm - Max. axial travel: 600 mm - Max. module (hobbing): 7 - Max. module (profile gear milling): 9 - Table diameter: 320 mm | Max. table load: 18 kN - Head swivel range (FK2.2): ±35° - Main drive power: 14 kW - Max. hob speed: 1,200 min⁻¹ - Max. tangential travel: 300 mm - Max. tool diameter × length: 160 × 330 mm - Tailstock column axial travel: 540 mm - Interface: HSK-A50 - Electrical: 220 V / 60 Hz - Machine weight: approx. 15,000 kg - Machining: wet or dry - Serial number: FN9014, year of manufacture 2011 - Stock no.: 16634234 | Model: LC-380 Key Customer Benefits - Flexibility: Wet/dry machining + filtration suitable for non-ferrous metals → wide material range - Accuracy: Tangential hobbing & A-axis measurement device → high gear quality - Productivity: 1,200 min⁻¹ hob speed, 600 mm face width → large parts in a single setup - Process Reliability: Oil/media cooling, table clamping, full enclosure - Turnkey Package: Multiple hobbing arbors and mandrels + complete documentation

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Predpfxjxwdxco Ab Iod Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, total height: 1,200 mm, total width: 1,200 mm, total length: 4,000 mm, Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Control: Conventional - Transport dimensions: 4000mm x 1200mm x 1200mm (l x w x h) - Transport weight [kg]: 4000kg Pjdpfx Aownib Tob Ierd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine length: 1100 mm Podpfoxvw R Nex Ab Isrd Machine width: 6585 mm Machine Height: 5200 mm Max. Workpiece Diameter: 2640 mm Weight Of The Machine Ca.: 23 t Grinding Wheel Diameter: 400 mm Spindle Speeds (Infinitely Variable): 600 bis 6000 mm Grinding Wheel Width: 80 mm X-Axis: 1200 mm Y-Axis: 300 mm Z-Axis: 1000 mm Z2 - axis: 150 mm Sandable profile depth: 80 mm Workpiece table: 0 bis 5 1 / min Feed rate X-axis: 3000 mm Feed rate Y-axis: 5000 mm Z-axis feed rate: 6000 mm Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows Prsdpfxeihfrre Ab Iod - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Year of construction: 2008, Gear grinding machines Reishauer RZ303 Prodpfx Aboxz E S Eo Isd

Year of construction: 1970, condition: used, Technical details: x-travel: - mm y-travel: - mm z-travel: - mm workpiece weight: 800 kg Predpfxjxu Dwys Ab Ijd machine weight approx.: 0,75 kg dimension machine xH: 1,2 x ,08 x 2,0 m The impact toughness is a measure of how resistant a material is to sudden, impact loads, especially when it has a notch (kerf) beforehand. It is mainly used for metals to assess fracture toughness under dynamic loading. *

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 6879, Specifications Manufacturer TACCHELLA Model ELEKTRA 1018 MPC Year 2002 Condition Used Serial Number 6879 Stock Number RT1762 Distance centers 1000 mm tip height 180 mm Maximum length that can be ground at 0°, left grinding wheel 450 mm 1000 mm Maximum diameter that can be ground at 0°, left grinding wheel 450 mm 350 mm Description Spare gears (as shown in photographs) Originating from bankruptcy machine like new manuals/electrical diagrams Tilting diamond grinding machine for internal grinding •Diamond grinding machine for external grinding wheels Prjdexy Hb Eopfx Ab Isd •Fixed steady rest •Grinding wheel flanges •Collet holder - with set of collets •Tailstocks •Spindles for internal grinding •Plug

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 8588, overall weight: 400 kg, rotational speed (min.): 3,120 rpm, rotational speed (max.): 3,860 rpm, height adjustment type: mechanical, grinding diameter: 200 mm, disc diameter: 150 mm, distance table to spindle center: 400 mm, Tool Grinding Machine Used Cutting Wheel Sharpening Machine, Grinding Machine, Cutting Wheel Sharpener Lorenz Type MS 80, year 1966, without coolant system, particularly suitable for sharpening rack cutter wheels (cutting wheels), maximum rack wheel diameter to be ground approx. 200 mm, maximum stroke of the grinding spindle carriage approx. 50 mm, clamping table surface approx. 600 x 245 mm, manual longitudinal table travel 250 mm, manual vertical table adjustment 275 mm, with coarse and fine feed, max. usable grinding wheel diameter 150 mm. Includes the MSV 75 cutting wheel sharpening device for producing a conical surface grind on straight-cut cutter wheels. Driven by a worm gear motor. Supplied with operating manual for this high-performance special machine for sharpening cutter wheels. Cutting wheel offered at a special price. Viewing under power is possible by prior appointment. Prodpfxoffybgj Ab Ied Price on request / Special price All technical specifications are subject to errors/typing mistakes. Sale is strictly limited to EU countries.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, gear diameter: 400 mm, total width: 275 mm, spindle speed (max.): 500 rpm, overall weight: 6,200 kg, The machine is in very good condition. 6 module Prjdjxzn Atjpfx Ab Ijd

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Prodpfouuarysx Ab Ied Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2005, Reishauer RZ150 gear grinding machine Prodpfoxz E Srjx Ab Ijd

Condition: excellent (used), Zwick / Roell Zwick Indentec hardness tester Type: 4150DLC-A Technical data: Available test forces 60, 100 and 150 kgf Power supply 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/Pe + EO-4010C camera and ueye software Prodpfx Asvxrxdeb Iod Condition: used Weight approx. 60kg Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). Prsdpfx Abjvx Sxdj Ijd In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Device For sale is a high-quality, used pendulum impact tester of type HIT5.5P by manufacturer Zwick / Roell. The device is ideally suited for instrumented impact testing according to Charpy and Izod on plastics, metals or composite materials. Device data: Device = HIT5.5P Version = V2.8 HIT Pendulum = 5 J Charpy Current pendulum energy = 5.000 J Friction = 0.017 J Friction reduction = practice swing Impact speed = 2.9 m/s Pendulum mass = 1.19 kg Release angle = 107.46 ° Pendulum length = 330.0 mm Technical data: Model: Zwick / Roell HIT5.5P Max. impact energy: 5.5 Joules Test methods: Charpy, Izod (instrumented) Data acquisition: force-time and displacement-time curves Supply: 230 V / 50 Hz Scope of delivery: Prsdjwqfnuepfx Ab Isd Zwick Roell HIT5.5P incl. 5.5 J pendulum Control unit with control panel Power and connection cables Shipping by freight forwarding (pallet shipping) – costs on request Pickup by arrangement in Borken possible. Condition: used (changes and errors in the technical data, information reserved!) We will gladly answer further questions by phone for you.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Prjdpfx Ajg Dglysb Iod Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. Prsdpfx Abed Dtn Ue Ied We may more questions like on the phone for you answered

Condition: used, KB Prüftechnik hardness tester type: KB 750 BVRZ Machine type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load level range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (HK 1 only), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic test sequence, evaluation of the impressions on the built-in LCD monitor using a built-in video camera and zoom lens guarantee maximum evaluation accuracy in accordance with the standard. All hardness values are immediately displayed digitally. User-friendly and powerful control panel with color LCD monitor, high-contrast and glare-free. The indentation is measured without parallax. The test forces are electronically controlled and applied with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with basic equipment that enables immediate commissioning with the indenters ordered. A selection of fixtures, test tables, indenters, lenses, hardness reference blocks etc. are available. Connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic machine. Fully automatic test sequence Optical evaluation via integrated video evaluation Extremely user-friendly and powerful large LCD color display industrially designed membrane keyboard Variable software customization zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED illumination Rockwell resolution 0.025 HRC Extremely powerful 200 freely definable test programs Calibration machine accuracy (option) Innovative LED ring light (option) Automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV Depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Test table ∅80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness impression on the LCD display, with movable measuring marks, parallax-free Logically structured, simple operator guidance Creation and storage of any of 200 test programs Automatic force selection by selecting the test method Freely selectable test force application times Freely selectable holding times of the test forces Online help Automatic correction for curved surfaces in accordance with DIN EN ISO Control of the fully automatic test sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 table B1 Report generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages German-English-French-Italian Prodpfou Hy Imjx Ab Ijd Statistics functions, such as Number of tests Min / Max Mean value Range Standard deviation cp / cpk Histogram (Subject to changes and errors in the technical data!)

Condition: defective spare-parts repository (used), Vickers Type: HVS 1000 The HVS 1000 digital micro Vickers hardness tester has a unique and unique and precise design in the areas of mechanics, optics and light light source and is able to produce a clearer image of the indentation and therefore a more precise measurement. The main purpose and scope of application: 1.Iron and steel, non-ferrous metals, metal foils, hard alloys, metal sheets, microstructures 2. carburizing, nitriding and decarburizing layers, surface hardening layers, plating, coatings 3. glass, wafers, ceramic materials Specifications: Predpfsrr Sqpex Ab Iod Model HVS1000 Type Digital micro hardness tester Test forces (N) 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test forces (Kgf) 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load control Automatic loading and release Lens indenter tower Manual Holding time (s) 0~60 Magnification of microscope x 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm) 0.01 Test range 5 HV~3000 HV Dimension of the XY test table 100X100 mm Movement range of the XY test table 25X25 mm Max. Height of the sample 120mm Max. Width of the sample 110mm Hardness conversion HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output Built-in printer, RS232 interface Power 220V, 60/50Hz Dimension (mm) 441 x 270 x 480 Net weight (kg) 35 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Chroma Type: ATE 17011 Dimensions: W x D x H 600 x 800 x 1760 mm Regenerative Cell Tester (5V/100A x 12 channels) Power supply: 400V/50 Hz 24 KVA Data Logger (64 channels) 8-Port Sensor Card Module 17212R-5-100 Max 5V / 100A Max channels: 12 (fixed) Parallel operation: 200A, 300A, 400A, 600A, 1200A V Adjustable from 0 mV to 5000 mV * 1, resolution 1 mV A Adjustable from 0.01 A to 100.00 A, resolution 0.01 A Prjdpfx Aewwrn Uob Ijd Connection: 400V/50Hz, 5 wires 24 kVA Weight: 250 kg Condition: used Scope of supply: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.