Used Bevel Gear Tester for sale (12,137)

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Gtedpfxjwn D Uhs Ah Hot Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t Gsdpfjvr Hf Eox Ah Hjtt dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Gtedpfx Ahoxdfa Uj Hst Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: excellent (used), The HURTH MODUL ZSTK 251 bevel gear planing machine was designed as a special machine and is used by manufacturers of drive systems in the drive technology, automotive, agricultural machinery, machine tools, mining technology, aviation and textile machinery sectors for the gear shaping of straight-toothed bevel gears with a short run-out. We still have 1 of these machines in stock, which, in conjunction with the Klingelnberg BF 203 bevel gear milling machine, can also produce crowned bevel gear sets in high quality. Technical data Workpiece diameter: 315 mm Module max.: 10 mm Gtsdpfx Aeup T Rleh Hst Tooth width: 45 mm Dimensions: 2.7 x 2.3 x 2.1 m Weight: 7,000 kg *Information and data are non-binding and subject to prior sale Viewing under operating conditions possible after consultation.

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Godjxdfazepfx Ah Hett Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: ready for operation (used), The Klingelnberg KNC 60 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the process of milling spiral-toothed bevel gear sets. Technical data Klingelnberg KNC 60 CNC Wheel diameter - max 650 mm Gsdpfx Aovyd Ndjh Hjtt Largest tooth width 120 mm Module 2.2-12 mm Number of teeth 5-120 Hypoid offset +/- 100 mm Usable cutter head radii 55, 100, 135, 170, 210 mm Machine weight Approx. 16,000 kg Dimensions (L x W x H) 5750 x 2800 x 2700 mm *Image shows the machine in its current condition as a used machine and can be offered on request, partially modernized, or as a retrofit completely modernized with a new CNC control (SIEMENS ONE).

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. Gtedpfx Ahjrtrzdo Het The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), The Klingelnberg BF 203 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used for milling straight-toothed bevel gears. Image shows the machine in its current condition as a used machine. Performance description: Wheel diameter: 240 mm Module - max.: 10 Tooth width: 60 mm Space requirement approx.: 2.3 x 2 x 1.7 mm Machine weight approx.: 6,700 kg Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to advance sales Gtsdelxzmispfx Ah Het

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Gtodpfx Ahertrykj Het Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Gedjxaqa Sjpfx Ah Hstt Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm Gtedporuakgofx Ah Hst 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, wheel width: 500 mm, 5-Axis CNC Hypoid Bevel Gear Tester – Flank to Flank Manufacturer: GLEASON PHOENIX Model: 500 HCT Year of Manufacture: 10/1998 – Installed mid-1999 Gtodjw Ec Uzopfx Ah Hjt CNC Controller: FANUC Capacity – Bevel/Hypoid Gears: - Maximum Gear Outside Diameter: 508 mm - Maximum Pinion Outside Diameter: 300 mm - Pinion Offset: 500 mm - Gear OD above center: 127 mm - Gear OD below center: 51 mm - Pinion Offset: 250 mm - Gear OD above center: 124 mm - Gear OD below center: 127 mm - Shaft Angle (without reverse mounting): 85° to 180° (with reverse mounting): 0° to 180° - Gear spindle nose to pinion axis: min. 51 mm – max. 305 mm - Pinion spindle nose to gear axis: min. 394 mm – max. 394 mm Capacity – Cylindrical Gears: - Center Distance: min. 25 mm – max. 305 mm - Distance between spindle faces (b = 0°): min. 165 mm – max. 419 mm Machine Axes Travels: - Max. Shaft Angle Travel (B-Axis): 85° to 180° - Max. Vertical Travel (Y-Axis): -127 mm to 127 mm - Max. Horizontal Travel (X-Axis): 140 mm to 394 mm - Sliding Base Travel (Z-Axis): 51 mm to 305 mm - Machine Center to Work Spindle Face (fixed): 114 mm Pinion Spindle: - Large End Tapered Hole Diameter: 3 29/64″ (#39 taper) - Taper per Foot - Taper Depth: 3″ - Chucking Force: 4,500 to 6,000 psi - Spindle Speed Range – Single Flank Testing (SFT): 15 to 2,500 RPM - Spindle Speed Range – Roll Testing & SBN: 15 to 3,000 RPM Gear Spindle: - Large End Tapered Hole Diameter: 3 29/64″ (#39 taper) - Taper per Foot: 39/64″ - Taper Depth: 3″ - Chucking Force: 4,500 to 6,000 psi - Spindle Speed Range – Roll Testing & SBN: 15 to 1,500 RPM - Spindle Speed Range – Single Flank Testing (SFI): 15 to 1,250 RPM - Brake Load – Conventional Testing: 69 Nm - High Torque Testing: 100 Nm Approx. Machine Weight: 8,200 kg Electrical Load: 16.7 kW (Peak) Compressed Air: 17 m³/hr (approx.), 4.9 bar The machine is in excellent condition and complete with all components and accessories.

Condition: used, Year of construction: 2018, Used angle head for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F holder with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: max. drive speed: 8,000 rpm max. output speed: 12,000 rpm Permissible operating temperature: 85°C Unit swivels 360° around drive axis Sound level: 80 dB(A) Weight: 3.257 kg Gtjdpfx Ahewkbcnj Hst Availability: short-term Storage location: Hochheim

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Gtsdpfervg N Djx Ah Het Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Condition: new, Year of construction: 2025, -Tfon Bevel Wizard® Linear -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications - Optimized for Large Workpieces Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm Emery Band Drum Diameter: Ø400 mm Gsdpfxert Tpns Ah Hott Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Gtsdpfxjwwrxaj Ah Hst Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Meter reading 48651 hours Operating system Fanuc L-64 Gedpfx Aswqr Tdoh Hjtt

Condition: excellent (used), Hommel Hommel Tester T1000 Surface Roughness Measuring Instrument – Jenoptik – incl. probe & case Item Description: For sale is a Hommel Tester T1000 by Jenoptik / Hommel-Etamic. The T1000 is a precise portable surface roughness tester that uses a tactile stylus to measure the surface roughness of various workpieces. Measured values such as Ra, Rz, and Rmax are displayed immediately on the screen. Gtedox Ebuwspfx Ah Het An integrated mini-printer additionally allows for direct printout of measurement protocols. The device is suitable for use both in production environments and in laboratories. Technical data: Model: Hommel Tester T1000 Manufacturer: Jenoptik / Hommel-Etamic Measured parameters: Ra, Rz, Rmax, etc. Measuring range: Ra approx. 0.03 – 20 µm Display: LCD screen with direct measurement readout Dimensions: approx. 28 × 20 × 10 cm Power supply: Power adapter 230 V AC → Device 9–12 V DC Weight: Device approx. 1.5 kg, in case approx. 3–4 kg Hommel Tester T1000 External surface roughness probe Two additional stylus probes in cases Power supply Original transport case Connection cable Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm Gsdewqr Twspfx Ah Hstt - laser type: CO2

Condition: like new (used), functionality: fully functional, Module range 0.5 –15 Gear width, continuously measurable max. 400 mm Max. Outer diameter of gear 300 mm Lead angle 0° - 90° Distance between centers 0 – 900 mm Admissible loading weight max. 200 kg Fully automatic CNC-controlled gear measuring center Gtedpfsx N Itwsx Ah Hjt for spur gears and other gears, depending on the software. Software: - Gears(internal/external), Shaper Cutter, Shaving Cutter

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Gedjvbwzispfx Ah Hstt Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: • Hardness tester • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear.

Condition: excellent (used), Year of construction: 2009, operating hours: 999 h, functionality: fully functional, machine/vehicle number: 0121, Used CNC gear rolling machine Godpfx Aox Tb R Doh Hett Manufacturer: PROFIROLL Model: ROLLEX HP Year of manufacture: 2009

Condition: excellent (used), Year of construction: 1979, Max. diameter: 1250mm Table diameter: 1000mm Module: 12 Gtodpox Tpqfefx Ah Het

Condition: used, Nut- and feather assembly from Stehle, each one set straight and with bevel including a set of bushings suitable for four-sided planing machines. Godpfxjx Tu T So Ah Hjtt knife: HSS flight circle (ø): 160 mm drilling: 60/40 mm length: min. 35 mm material: steel Labelling: MECH

Condition: excellent (used), Max. diameter: 1250mm Module: 14 Gtsdpjx Tplpjfx Ah Hjt