Used Bhx 050 for sale (1,212)

Condition: ready for operation (used), Pump; KSB ETABLOC GNF 050-315 Centrifugal Pump, Used machine Manufacturer: KSB ETABLOC Type: GNF 050-315 Lasdpoyh D H Tofx Adgjg Overall dimensions: Width: 510 mm Depth: 420 mm Height: 700 mm Weight: 55 kg Electrical data: 400 V; 1450 rpm Flow rate: 30 m³/h Head: 26 m Year of manufacture: 2010

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) Ljdpoyyvttefx Adgeag No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Ljdpfxozq Ab Ns Adgsag Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PC 85 (Software woodWOP) Lodpfxoziapbs Adgsag Safety cabin (enclosure) of the working head Separate electric and command cabinet - Total installed power (Kw) 20 (ca.) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) In-feeding working table (panel support) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 100 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces Lsdpfx Adofbbtisgoag -Dimensions: 412/54/H54 mm -Weight: 1.60 kg/piece

Condition: good (used), Year of construction: 1990, electric motor, three-phase motor -Manufacturer: Schorch, electric motor type KA3280M-BB024-050 -Power: 90 kW -Speed: 1475 rpm -Shaft: Ø 75 x 140 mm -Design: B5 -Protection class: IP 54 -Number: 2x motors available -Price: per piece Ljdpfx Adjir E Svjgoag -Dimensions: 1050/700/H550 mm -Weight: 688 kg/unit

Condition: used, Gearboxes, angle gears, worm gears, -Manufacturer: Motovario, gearbox type NMRV / 050 -Translation: i 030.0 Laedot Iyu Ispfx Adgjg -Hollow shaft: Ø 25 x 90 mm / Ø 14 x 32 mm -Dimensions: 140/160/H190 mm -Weight: 3.7 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: Servo Power Supply Laodpfx Adefxwa Tsgjg -Type: TVM 1.2-050-220/300-WO/220/380 -Item: 232270-04397 -Price: per piece -Number: 2 pieces -Dimensions: 390/105/H325 mm -Weight: 14.8 kg

Condition: good (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 050 1:100 -Speed: 9 rpm Lajdsy Ai N Hopfx Adgsg -Engine: Type Y2-802-6 -Power: 0.55 kW -Protection rating: IP55 -Shaft: Ø 25 x 90 mm -Dimensions: 390/200/H250 mm -Weight: 18.8 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Rexroth, standard cylinder double-acting type Stroke: 800 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -max. pressure: 10 bar -Dimensions: 960/50/H75 mm Ljdpfxjwxtpco Adgjag -Weight: 3.5 kg

Condition: used, Ventilation valve, relief valve -Manufacturer: BEV, ventilation valve for water Laedpet E D Ndefx Adgeg -Type: M16072 PN16 DN 050 -Bolt circle: Ø 125 x 17 mm -Dimensions: 165/162/H295mm -Weight: 13 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller -MOD: 1/11919-002 -Art.: 234500-14530 - Quantity: 1 piece Ledpfx Adsfg Al Njgeag -Dimensions: 390/105/H325 mm -Weight: 8.2kg

Condition: good (used), Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1100Pressure: 25 bar -Operating voltage: 24 VDC -Signal output: 0-5 VDC Lasdpjb A Rhzefx Adgeg -Weight: 0.3 kg

Condition: good (used), End mill, end mill, milling cutter, indexable inserts -Outer diameter: 50 mm -Teeth: 4 Laedeb A R E Ujpfx Adgeg -Weight: 0.5 kg

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 50 t, stroke length: 105 mm, total width: 2,000 mm, overall weight: 4,300 kg, working width: 2,000 mm, distance between stands: 1,600 mm, Promecam ITP2-050-20 Ledpfxju Dm Iue Adgoag Converted to Delem DA 65R control system in 2019 15" touch screen with graphics Bending length 2000 mm stand passage 1600 mm Bending pressure 50 T CNC back gauge X-R-Z1+Z2 axis Connected load 7.5kw Stroke 105mm Intermediate pieces Int100 Front support tables Amada tool system incl. many tools

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,771 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, Equipment: lighting, - Full cab, windshield wiper - Ready to drive and operate - New turbocharger - Driver's side window missing - 2 work lights on the roof Laodpfxezp N Uyj Adgsg - 2 work lights on the mast - Good tires (SE) Price upon request.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-250-23-0021, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, feed rate X-axis: 138 m/min, feed rate Y-axis: 80 m/min, Submission of a bid obligates timely collection by 15.06.2026! TECHNICAL DETAILS X-axis speed: 138 m/min Y-axis speed: 80 m/min Z-axis speed: 50 m/min Workpiece length: 300–2,500 mm Workpiece width: 100–1,000 mm Workpiece height: 4–80 mm MACHINE DETAILS Control system: power control PC 85 T Dimensions (L x W x H): 6,500 × 2,300 × 2,700 mm Electrics: 3 × 415 V / 50 Hz Power consumption: 19.5 kW Fuse: 50 A Pneumatics: min. 7 bar Laedey Sad Hopfx Adgsg Air consumption: 2,500 NL/min Extraction connection: 2 × 280 mm Extraction capacity: min. 4,450 m³/h

Condition: ready for operation (used), Wittenstein TPM 050-004I-600K-OHO-090IF205 motor SN 320082, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lsdpjx Dwk Sofx Adgeag

Condition: ready for operation (used), Wittenstein stator for TPM 050-004I-600K-OW0-075UL274 motor SN: 1599476, used, in good condition, 100% functional, scope of delivery as per photos. Ledpfx Adex Dwkfogsag

Condition: ready for operation (used), Indramat TFM 3.1-050-300-W1-220V frequency inverter MNR: R911234797 SN:23515802541, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as per photos Lodpfxox Dw H Te Adgoag

Condition: ready for operation (used), Wittenstein rotor for TPM 050-004I-600K-OW0-075UL274 motor, serial no.: 1599476, used, in good condition, 100% functional, scope of delivery as per photos. Lajdpfxsx Dwi Us Adgsg

Condition: new, ETEL TMB0291-050-3TDS-E82 torque motor, serial number, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Ljdpfxslki Two Adgoag

Condition: ready for operation (used), Wittenstein TPM 050-004I-600K-OHO-090IF205 motor SN 318825, used, normal signs of wear, 100% functional, scope of delivery as per photos. Laodpfxox Dwk Es Adgsg

Condition: ready for operation (used), Indramat TDA 1.1-050-3-A00 AC main spindle drive, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Laodei Ebmqepfx Adgjg

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 10900 € 209.28 € 60 mm 595 mm 363 mm 900 mm 130 kg 10.5 cm³ 60 x 3 mm 2"Gas x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 4 mm 60 x 4 mm 64 x 4 mm 64 x 4 mm 60 x 4 mm 50 x 4 mm 35 mm 60x30x4 stehend, 60x40x5 mm 300 mm 10 mm 10 mm 1,25 / 2,50 U/min 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds Ledpjwirxkofx Adgsag overload protection mobile by rolls and handle tools not included