Used Biesse Akron 845 for sale (323)

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Itodpfxsw Idgvs Adwob Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Itedowuz R Hspfx Adwjb Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Condition: used, machine/vehicle number: 007870, Max. panel width: 3200 mm Itsdpfxswimz Hs Adweb Max. panel length: 800 mm No of Bottom Units: 2 No of injectors: 12

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Isdpfx Adel Txw Hjwotb Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: used, machine/vehicle number: 007805, Max. panel width: 3200 mm Max. panel length: 1200 mm No of Bottom Units: 6 No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes Itjdpfx Adex A E Susweb

Condition: used, machine/vehicle number: 007673, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Itsdpowlplgjfx Adwjb Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) - Goose-neck type Iodpjdh Tf Ujfx Adwjtb - Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) - Numerical Control with Software Biesse Works - Safety cabin (enclosure) of the working head - Front emergency carpets - No. 1 In-feeding table (with motorized belts) SX - No. 2 Workpieces fixing clamps (for the panels introduction in the working area) - No. 1 Out-feeding table (with motorized belts) DX - Max. useful working area (X - Y - Z) mm 3000 x 1000 x 60 - Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (for longer panels than mm 2000, minimum thickness is mm 13) - Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1000 x 60 - Total installed power Kw 20 BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" Itodpfx Ajtr Envodwjb W05024K) Brush-cleaning machine "WANDRES" W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 3000, with automatic handling. Composed of the following machines: X03001A) Double Loader "RBO" Mod. Winner C 3200 with central motorised roller conveyor X03001B) 1st Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 1 - 7.5 X03001C) Turning station (90°) lengthwise to crosswise "RBO" Mod. GPK 1 X03001D) 2nd Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 2 - 11 Iodpfxsi Rbg Ts Adwstb X03001E) Turning station (90°) crosswise to lengthwise "RBO" Mod. GPK 2 X03001F) Double Stacker "RBO" Mod. Winner S 3200 with central motorised roller conveyor

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° Itjdpodfgg Iofx Adwsb C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Itjdpewb Allefx Adwob Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT Isdettgy Hspfx Adwstb L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Isdpfedi R R Rox Adwstb Total installed power (Kw) 11,5

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) Itjdpoflc T Sefx Adwob No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms Iedpfx Adod Rg Dzswetb N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Ioded Rg Dpepfx Adwotb Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader Itodpscggy Ssfx Adwjb - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” Itodpfecr U Urox Adwjb SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), Itedpfx Aod Nviqsdwjb - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 3 Transport belts to evacute chips (wastes) (N°) 2 Iedpsrm Ik Tjfx Adwotb Total installed power (Kw) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Itodpou Tg Uqefx Adwsb Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. Iedpju Tqb Uefx Adwetb - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: Iodjh T Dvtepfx Adwetb KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Itjdjlwqrtopfx Adwob Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: O03009A) THROUGH-FEED MULTI-BORER “BIESSE” Techno Logic with CNC No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), No. 5 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 5 top pressing devices No. 2 endless screws to evacuate the wastes. Numerical Control Type CNI Iedsw Uhbkjpfx Adwotb O03009B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno INFOR a C.N. No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 2 Top pressing devices No. 2 endless screws to evacuate the wastes.