BIESSE Selco WNT 630

BIESSE Selco WNT 630

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Iiedpfx Aozuyl Tsgyjh Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2022, Machine is in perfect condition in small woodoworking shop. Iisdpfxsy S U Duo Agyeh

Condition: used, Year of construction: 2018, Panel dividing saw Manufacturer: Homag Type: Profi HPP300/43/43 Year of manufacture: 2018 Technical data Cutting length: 4,300 mm Cutting width (programmable sliding table): approx. 4,250 mm Iisdpfezuy N Sjx Agysh Max. feed rate of the saw carriage: 130 m/min Optional saw carriage feed rate up to 150 m/min Saw blade projection: 80 mm (optional 95 mm) Max. saw blade diameter: 350 mm Main saw motor: 11 kW Scoring saw, motor-adjustable Clamping jaws: 7 pieces (2-finger design) Control system: CADMATIC 4.1 / 4.5 or powerTouch Total connected load: approx. 18.4 kW Compressed air: 6 bar CE marking Package thickness up to approx. 80 mm (standard) Max. saw blade: 350 mm Main saw blade: 350-380 mm, depending on configuration Scoring saw motor: 1.5-2.2 kW Extraction capacity: approx. 3,350-5,230 m³/h Processing: Single sheets and package cuts Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Iedpeytp Hrsfx Agysih

Condition: used, Year of construction: 2015, machine/vehicle number: 00, ACM Vertical Sawing Machine, Model Star 700 Iijdpfx Agolp Irreyjh Year of manufacture: 2015

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot-operated 1200 x 800 mm 80 mm dust extraction port pneumatic connection Iedsigadlepfx Agyjih Cable + plug, 16 A 1 set of operating tools 1 set of feeler rollers

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads Iedpovwbg Uefx Agysih 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 Iodpfjx Aqdcjx Agyeih 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm Ijdpfszuy N Ejx Agyoih - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, grinding width: 650 mm, Equipment: type plate available, Kündig Botop, sanding unit on top roller, pneumatic shoe, sanding unit on bottom roller, pneumatic shoe. Machine has been completely overhauled, new carpet, new rollers. Iedpfevmt D Rox Agyeih