Used Biesse Rover 16 for sale (321)

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 Cajdpfjgipk Aox Addja feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm Csdpfxexw T Tpo Addjaa MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: excellent (used), Year of construction: 2001, I sell the Destacking device BIESSE RBO WINNER SC, year 2004. Destacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Caedpfx Adjxyah Sodea Automatic loading. Infeed table motorised roller-system Outfeed tables motorised roller-system on the floor (2 channels) Security fence system fully complete ! Total power 24kW Year 2004. Available immediately. Ready for work.

Condition: used, Year of construction: 2007, NC Control System TS 10: Windows CE operating system USB port Cedpfsx Ah Ixjx Addsaa Consisting of a chain track and overhead pressure belt ensuring optimal clamping of the workpiece during processing. Glue Unit, Edgebanding Application and Pressing Unit VC-710: Tekno glue system: Glue roller that can run with or against feed direction Quick-change glue pot for easy cleaning or glue colour/type change Automatic edge feeding for coil material or solid strips: Ø900 mm disc for coil material Magazine for solid strips with cooling system and manual vertical adjustment Knives for cutting coil material up to 3 mm thickness with automatic pressure adjustment Pressing unit: Large motorised Teflon-coated roller with individually adjustable pneumatic pressure 5 × Ø60 mm Teflon-coated rollers with pneumatic adjustment; first two are reverse-tapered Machine supplied with full sound-insulated safety enclosure. Technical Data: Workpiece height: 10–60 mm Workpiece height with corner rounding: 10–35/60 mm Edge material height: 14–64 mm Coil edge thickness: 0.4–3 mm Solid strip thickness: 0.4–15 mm Workpiece overhang from chain: 25 mm Minimum workpiece length: 140 mm Minimum workpiece width (length 140 mm): 85 mm Minimum workpiece width (length 250 mm): 50 mm Feed speed: 10–14–20 m/min Electronic NC-controlled positioning of pressure beam Lighting inside safety enclosure Infeed plate spacer with capacitive sensor RPT Akron 800 pressure rollers with timed insertion IN-701V pneumatic tilting of end-trimming motors in 4 positions 3 pneumatic exclusions of machining units Quick selection of 2 positions from control panel for CR-202 or CR-401 8000058 – Quick Selection of 4 Positions (Replaces the 2-position quick selection) 8000037 – Heated Infeed Fence For removing moisture from the bonding surface. 8000100 – Glue Pre-Heating Unit QM-701 Facilitates glue colour/type change Refills glue pot automatically Glue melted at 180°C and transferred to glue pot 8000300 – Pre-Milling Unit FI-701 – 1800 W Prepares the workpiece before edge application: Horizontal and vertical movement of 2 motors on linear guides Independent automatic engagement of each motor Independent copying shoes with manual adjustment and mechanical digital displays Auto-Set system positions cutters according to panel thickness Includes 3 mechanical high-precision digital displays 1 set Dia cutters for panel thickness 12–22 mm Motor Power Increase to 3500 W for Pre-Milling Unit End Trim Unit IN-701-V Top/Bottom Trimming Unit RS-701 – 800 W CNC-controlled pneumatic switching between 2 trimming offsets, incl. pneumatic exclusion. Tiltable Top/Bottom Trimming Unit RI-701 – 650 W NC-Controlled Multi-Function System (4 operations) 4-position revolver head with multi-function knives and independent pneumatic exclusion of motors. 4-Motor Multi-Function Corner Rounding Unit CR-401 Fast change between thin and thick edges (0.4 mm ↔ 3 mm) via FAST 2-position system Equipped with R=3 mm, motors at 12,000 rpm Corner rounding speed 18 m/min, trimming 20 m/min Edge Scraper RB-701 Glue Scraper RCC-701 Brushing Unit SP-700 Hot Air Blower PH-700

Condition: excellent (used), Year of construction: 2003, CNC UNICA Wood production year 2003, Uniteam brand since 2016 belongs to Biesse Codpfswk Ekcox Addeaa Machine in good working condition, very fast working in x - y - z axis , ideal for milling in wood , MDF, laminated panels Max. useful working area (X-Y-Z) mm 3440 x 1300 x 200 mm Vertical electrospindle motor power 9 kW Machine size 5000 x 2350 x 2200 mm Weight 4000 kg

Condition: new, Year of construction: 2024, functionality: unexamined, machine/vehicle number: 1000065502, Single Sided Edgebander Stream B 9.5 with: premilling unit, gluing unit with EVA-EVA REAL TIME GLUING SYSTEM WITH PRE MELTER (dual EVA gluing system consisting of two independent glue heads tahat allows for real time colo switching without the need for manual glue head changes), 6 position edgebanding containers, edn trimming unit, rough milling unit, fine trimming unit, corner rounding unit, universal milling unit, edge scraper, glue scaper, brushing unit, phon. Cjdexyf Nzjpfx Addeaa

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Caodexxlqvopfx Addea Pre-milling cutters, Glue application, Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min The machine is in very good condition.

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Caedpfx Adewgktnsdea Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Operating Units Right Side: 15 nr Operating Units Left Side: 15 nr

Condition: excellent (used), Year of construction: 2001, I sell the Stacking device BIESSE RBO MAGNUM, year 2001. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Automatic loading. Infeed table motorised band-system Infeed tables motorised roller-system on the floor (2 channels) Outfeed table front Band-system Security fence system fully complete ! Total power 25kW Year 2001. Caodoxyag Uepfx Addsa Available immediately. Ready for work.

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Cjdpoxzb Iiofx Addsaa Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, KuKa robot with Biesse RBO handling equipment . Made by Biesse - RBO Codsxy Aftspfx Addsaa - Table for referanse point indication - 4 meter long beam with carrige for the movement in X direction , parallell to the machine x axis - Schmaltz vacuum system - Separte el cabinet for the robot and other el cabinet for the RBO handling. This robot cell was connected to the Biesse Rover machine until 10.11.2025 , for the handling of panels to end from the machine. All robot function are 100% operative. Sales from the factory close down. Please take a look at incl. video Rekman Maskin & Service - service of cnc machines since 1986

Condition: excellent (used), Year of construction: 2019, BIESSE AKRON 1440 Airforce system (return system is not included) - Year 2019 - good condition - NC motors, all adjustable from PC control - Premilling • top pressure with belt instead of rollers • Auto infeed edge • Riepe release nebulizer • Glue pot • Air force system Codpfjv A H Ubsx Addjaa • Scissors • Pressure zone 3 rollers • Riepe antistatic nebulizer • Double saw unit 0-15° • Riepe lubricant nebulizer for delicate edges • Double motor corner rounding unit • Riepe cleaning nebulizer • Edge scraping unit • Glue scraping

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, 2 x Biesse Akron 1440 Edge Banders Edgebanders are 2017 + 2018 Extra Glue Pot available for each Homag Returns included in sale Machines are in production and ready for use Codpex A E Ipsfx Addoaa Price is per machine

Condition: excellent (used), functionality: fully functional, Horizontal blade aggregate HSK compatible with Biesse machining center Casdpfexqanyjx Addoa

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 100007528, total length: 9,000 mm, total width: 3,000 mm, total height: 1,700 mm, type of input current: three-phase, power: 13 kW (17.68 HP), Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Cedpfxjxmi E Hs Addoaa Delivery can be arrange in the Republic of Ireland

Condition: used, Year of construction: 2016, CNC boring machine – BIESSE EKO 2.1, year of manufacture 2016 An excellent multifunctional machine for vertical and horizontal drilling and milling. Equipment: -14 vertical drills -8 horizontal drills Cedpfexfz Azox Addjaa -1 saw in the X direction -1 milling spindle, 5.5 kW -8 positions in the revolver for tools and aggregates Additional: Extra license for bSolid software Workpiece length measurement and shifting of drilling from the edge according to tolerance The machine is in good condition, everything works, regularly lubricated and maintained. Price without VAT.

Year of construction: 1992, condition: good (used), - Drill head: 21 spindles Cajdpsrcfijfx Addsa - Glue guns: 6

Condition: used, machine/vehicle number: 007871, Max. panel width: 1200 mm Max. panel length: 3200 mm Work capacity: 25 Cycles/min Movement system: suction cups. Cedpfxjwimzms Addsaa

Condition: good (used), Code: 0132 Brand: BIESSE Model: SKIPPER 100 - CE Standard CNC working center for furniture, kitchens, custom furniture, panels and various - CE Standard - Year 2006 Technical data: 3-axis (x-y-z) CNC working center - swan neck machine Movable panel, fixed working head - panel horizontally Integral protection of the working head and with emergency front carpets Numerical control with biesseworks software Infeed table (with motorized belts) left N. 2 panel fixing clamps (for their introduction into the working area) Outfeed table (with motorized belts) right Useful (maximum) working area (x - y - z) mm 3000 x 1000 x 60 Dimensions (minimum) workpieces that can be machined (x - y - z) mm 90 x 70 x 8 Dimensions (maximum) workpieces that can be machined (x - y - z) mm 3000 x 1000 x 60 (for panels longer than mm 2000, the minimum thickness becomes mm 13) Total installed power (kw) 20 (approx.) Lower working units: N. 1 vertical electro spindle hsk d-50 (power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Csdpfx Aexqntdjddoaa Upper working units: N. 1 vertical electro spindle hsk d-50(power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Transfer for panel loading and unloading: structure made of aluminum profiles, belt-driven table for panel translation/lifting bar BiesseWorks machining programming system Compressed air 7/8 bar Total power Kw 20 Overall dimensions - (see attachment) Machine weight kg 2700

Condition: excellent (used), functionality: fully functional, Horizontal blade unit – spare parts Cjdpoxqalrofx Addeaa

Year of construction: 2004, condition: excellent (used), I sell the throughfeed drilling machine with BIESSE TECHNO FDT. Year 2004 Working area: X: 215 - 32.000 mm Y: max. 672 mm (horizontal spindles 24 pcs. per 32mm offset) Z: Workpiece thickness: 9 - 65 mm min. X middle distance between vertical units: 96 mm Configuration: 4+4 motors from under Caodei U Apmjpfx Addja 1 bottom jumping milling unit 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 4+4 motors from top 4 pcs. material pressure from top Very good condition. Available immediately. One more BIESSE TECHNO FDT in different configuration available from line. Price on agreement.

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit Codpfx Ajd Inkteddeaa - Milling unit - Fine trimming unit - scraper - buffing unit

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Codpfxew Tivmj Addsaa Corner Rounding Unit: yes Operating Units: 9 nr

Condition: excellent (used), functionality: fully functional, Biesse unit for lower drilling Caodpfx Adoxqaiqjdea

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 2 pcs. SARG Vibration dowel inserting device. 1 pc. vacuum underpressure pump Part of the BIESSE line consisting of: Caodpfjt N Rkvox Addoa COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.