Used Dowel for sale (364)

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! Bedpfx Abev N N Spjtoll 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information.

Condition: like new (used), Year of construction: 2000, functionality: fully functional, Dowel and slot drilling machine GANNER GANNOMAT JUNIOR 323 in very good condition, the machine is in absolute new condition; it comes from a very small carpentry shop and only has some paint damage, as it has not been used for about 18 years. With this machine, you can mill slots and drill dowel holes on 2 levels without re-clamping. 380V, 1500W 2800 rpm Year of manufacture 2000 With this machine, you can mill slots for, for example, lock boxes and similar items, or produce all types of frame dowel connections at right angles, flush, and mitered. Ideal for the production of dowel connections in timber frame construction, furniture, door, window, and stair construction, and for similar applications. Drilling on 2 levels, the grid and stops, and the design of the machine allow dowel connections to be produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. With 2 angle stops (one center stop and one side stop that can be used on both sides). At the front of the machine table, there is a 2000 mm long stop rail with 2 folding stops; the stop rail can be shortened or extended if required. The workpiece is clamped using 2 pneumatic clamping cylinders. The height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures a quick adjustment of grids and the drilling levels. The heights of the individual drilling levels can be read on 2 mechanical dials; adjustment screws are located above the dials, which can be used to adjust the drilling heights. With a precision 12 mm grid rail, which has a center grid and 12 grids on the left and right. Can be quickly converted for slot milling; the machine can then be used without a grid with 2 adjustable stops on the left and right and then has a working width of max. 420 mm. The max. drilling hole height is 100 mm. The max. drilling hole depth is 150 mm with stop and scale. The max. workpiece height is 160 mm. Everything is in perfect working order. We will personally deliver and demonstrate the machine throughout Germany for 220.00 euros, which means you have no risk when purchasing; delivery to Austria and the EU is also possible upon request. The machine table is 870 mm wide, 140 mm deep on the sides, and 350 mm deep in the center. Bsdpfozxuiujx Abtjll Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. With 2 chucks up to 20 mm. Very stable and durable design. The precision guides with the play-free ball bearing bushes are OK and move smoothly.

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Bljdpfx Ajyy Rtzjbtel Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: used, Year of construction: 2005, functionality: fully functional, New in the offer SCM MB 21 / HOLZKRAFT TECNOMAX MB21 Multi-spindle drilling machine Table width: 905 mm Maximum drilling stroke: 60 mm Drilling spindles: 21 Drill spacing: 32 mm 2 parallel stops Pneumatic tilting drilling block Pneumatic workpiece clamping Pneumatic clamping: 3 Workpiece support: standard table Bljdpfx Ajzaddfebtol Drilling depth adjustment: turret-type stop Conformity marking: CE mark Weight: 267 kg Space requirements: Length: 1 m Space requirements: Width: 1.1 m Space requirements: Height: 1.3 m

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Dowel and multi-hole drilling machine including stops READY FOR USE Blsdpjzvm Haofx Abtol

Condition: used, Year of construction: 2018, machine/vehicle number: 432.10.507.19, type of input current: three-phase, overall weight: 340 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, power: 1.5 kW (2.04 HP), We offer this used Felder FD 21 pro dowel drilling machine, manufactured in 2018. Type: FD 21 pro Bjdpfx Abezuwgujtjll Serial number: 432.10.507.19 Code: 7502 Voltage: 400.0 V Number of phases: 3 Frequency: 50 Hz Current: 3.35 A Power: 1.5 kW Year of manufacture: 2018 Country of manufacture: Austria If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 1985, Second-hand machine Year of manufacture: 1985 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Weight: 420 kg Availability: at short notice Bledpjzk N A Tefx Abtjl Location: Röllbach

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 1984 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Bledpozk Nuvsfx Abtel Weight: 420 kg Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps Bljdpjzk N Dwefx Abtsl - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Bedpezbunkofx Abtsll Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Blodpfjzlbqfsx Abtel Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2014, Drilling and dowel insertion machine Bjdszuyn Ispfx Abtell Manufacturer: Weeke Type: OPTIMAT ABD150 Year of manufacture: 2014 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle Bsdpfx Abezlbrvetell - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: used, Year of construction: 1998, total width: 1,100 mm, total length: 1,700 mm, total height: 1,150 mm, Colour: White Empty weight: 1.100 kg - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 980223 - Table length [mm]: 245 - Table width [mm]: 735 - Number of spindles [pcs]: 8 - Spindle diameter [mm]: 16 - Max. spindle speed [rpm]: 17000 - Distance between spindles [mm]: 50 - Workpiece clamps [pcs]: 2 - Workpiece support/Guide: Table - Drills included: Yes - Voltage [V]: 415 Bledezvx N Hopfx Abtol - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 1700mm x 1100mm x 1150mm (l x w x h) - Transport weight [kg]: 1100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used dowel drilling machine, Scheer DB 12 Blodpezpv Rzofx Abtsl 3 drilling spindles, pitch 32 mm Maximum drilling depth: 45 mm with a drill length of 80 mm Maximum drilling depth: 70 mm with a drill length of 105 mm Operation: foot pedal Number of material clamps: 1 Type of material clamping: pneumatic Table size: 400x250 mm Weight: approx. 130 kg Dimensions: approx. 1350x650x950 mm Motor power: 1.1 kW

Condition: good (used), Year of construction: 2009, functionality: fully functional, Dowel Insertion Machine Ganner Selekta 252 Bedpoycf Ikjfx Abtjll Year of manufacture: 2009

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Bjdov Trlmjpfx Abtsll Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Max. panel length: 2100 mm Blodpfex A Tc Ujx Abtjl No of injectors: 4 Lateral horizontal groups: yes

Condition: used, Scheer DB 5 dowel hole drilling machine for the precise and rapid drilling of dowel holes (horizontal and vertical) in solid timber and board materials. The machine is ideal for mass production in furniture manufacturing as well as for precise joints in interior fit-out work. Includes a comprehensive range of dowel bits. Technical data: - Drilling spindles: 21 - Pitch: 32 mm Blsdpfoztvx Tsx Abtol - Passage width: max. 1,000 mm - Swivel mechanism: pneumatic - Fax: , Mobile: , Machine No. 208695, Jan 2011, Cost price €1,000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, purchase price €500

Condition: good (used), Year of construction: 1983, 1 used SCHLEICHER strip straightening machine with unwinding reel Maximum sheet width: 320 mm Minimum sheet thickness: 0.8 mm (customer has also processed 0.4 mm) Maximum sheet thickness: 3 mm Number of upper straightening rollers: 3 Number of lower straightening rollers: 3 Diameter of straightening rollers: 70 mm Total power consumption: 1.4 kW Bledpjzphaujfx Abtjl Machine dimensions L x W x H: approx. 1300 x 1200 x 1800 mm Machine weight: approx. 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1980, condition: ready for operation (used), Ayen Type DB 1000 K 23 Year of manufacture 1980 GS-tested Bledpfspgkqpsx Abtsl number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic Hole line drilling device

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Bljdpsxxi T Ujfx Abtol Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm Bljdpfx Abovwgagetsl clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Bsdpjyy I Snsfx Abtjll

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Bljdpfxevxr Rao Abtel