Used Dowel Machine for sale (85,692)

Year of construction: 2001, Condition: used, *Sale price-valid until 30.11.2024* Used machine Year of construction: 2001 Jcmmamyga Condition: Well maintained/functionally tested Equipment and technical data: Number of drilling spindles: 21 pcs. in 32 mm pitch Drilling direction: Bottom & front Tilt: 0-90 degrees by handwheel Pneumatic material clamps: 3 pcs. Passage: Max. 100 mm in height and max. 640 mm in width Motor: 1.5 kW Suction diameter: 120 mm Incl. a variety of stops Availability: short term Storage location: Röllbach

Condition: used, Year of construction: 2020, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. Weinig Unipin 200 with parapet gluing ----- Dowel driving machine with automatic gluing ! Sold on behalf of a customer: Only around 40 operating hours, no longer required due to product changeover! Manufacturer description: ----- Weinig UniPin 200 for driving in dowels on the front after automatic glue application Workpiece clamping pneumatically via hand switch after manual presetting (handwheel). Room conditions ----- Temperature: In operation: from 15 to 30°C Out of operation: from 15 to 30°C During storage and before installation: from 5 to 40°C - +/- 5% Relative humidity (without condensation): In operation: from 10 to 70% - +/- 10% Out of operation: from 10 to 70% - +/- 10% During storage and before installation: from 0 to 90% - +/- 5% Altitude In operation: from 0 - 1500 m above sea level C93D8Ku Technical data ----- Total connected load approx. 1.5 KW (2.0 HP) Full load current: approx. 3 A Pre-fuse: max. 10 A Air consumption/standard: 80 l/min /Blow-out device: 150 l/min Operating pressure: supply 8 bar Operating pressure: UniPin 6 bar Permissible workpiece dimensions: Width: 260 mm Height: 150 mm Dimensions Base area: 1050 x 2150 mm Working height: approx. 1000 mm Permissible dowel dimensions according to DIN 68150 Diameter 8 mm +/- 0.2 mm Length 60 mm +/- 1 mm Dowel feed via vibration conveyor Dowel diameter: 8 mm Filling quantity: 500 pieces Pressing force: max. 1000 N Glue system ----- Standard container: 30 liters Glue pressure: up to max. 50 bar For processing B4/D4 glue, one-component according to DIN 68602 / EN 204 suitable. Pump control system made entirely of V4A steel Viscosity at 25°C < 5000 m Pascal Viscosity at 20°C < 4000 m Pascal Standard equipment ----- Electronic dowel driving depth monitoring The driving depth of the dowel is indirectly monitored electronically via the end position of the driving cylinder. If the end position of the driving bolt is not reached during driving, the machine is stopped and a message is displayed on the operating terminal. Prerequisites: - Part must lie cleanly on the zero edge. - Dowel must correspond to the preset length Electronic glue monitoring consisting of monitoring the nozzle needle and pressure difference at the glue nozzle. Advantage: Ensures the gluing function The machine is stopped if there is a malfunction in the gluing function and a message is displayed on the operating terminal. The customer is responsible for maintaining the quality of the corner strength of the corner connection. Weinig accepts no liability for compliance with the quality standards of the corner connection Parapet gluing ----- Contactless application of glue dots to the front of the workpiece with a pulse valve. The dot size can be set by the nozzle opening time and or by means of the glue pressure. The rows of dots must be transferred from the customer’s computer program. The first and last dots in the respective horizontal line are described. The distances between the glue dots are calculated automatically by the control system. Optionally, a maximum dot distance can be transferred in the data set. ...

Condition: good (used), Year of construction: 1984, Functionality: fully functional, Machine/vehicle number: Fabrik-Nr. 8411 468, Total length: 1,450 mm, Total height: 1,743 mm, Overall weight: 590 kg, Rotational speed (min.): 2,800 rpm, Spindle speed (max.): 3,065 rpm, The Ayen SKB 50 dowel boring machine was not used constantly, only occasionally. It is fully functional. We cannot say how many operating hours the machine has, as this make does not yet have an integrated counter. The machine is actually a stationary machine and was not really used much in our joinery. We still have dowels left, which we would add. Dpqo8V The machine is sold as seen/described. We will of course help with loading the machine, but the freight costs will be borne by the buyer.

Condition: used, Year of construction: 1992, with pneumatic stroke for drilling on 2 levels used, top equipment, many accessories make Ganner type Junior LBM320 year of construction 1992 Masch.-no. 832263 Motor 1,5 kW drill chuck 20 mm two-jaw adapter plate for drill head mounting multi-spindle drill head 8 spindles 32-32-32 / 25-25 / 32-32-35 / U = 25-25 dowel drilling device with grid workpiece stop on both sides 2-part r - li miter fence 45° center fence Bnov77Z2Ls basic fence 1100 mm with pendulum fences 4 pieces r li each 1500 mm pneumatic stroke workpiece clamp pneumatic 2 new price approx. 17.000,00 € storage location 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

Condition: used, *Sale price-valid until 30.11.2024* Used machine Condition: Functionally tested Technical data: Fully automatic pneumatic sequence control (clamping-drilling-unclamping) by means of for each program separate start button for each program I8Qx8Wlvg Drilling chip distance (hole center) min. 32 mm max 800 mm Distance between stop and drill hole row min. 10 mm max 550 mm Drill head 6 pieces Number of drilling spindles of the drilling head 2 pieces 2 motors 1.5 kW each Spindle speed 3000 rpm For horizontal and vertical construction drilling For vertical hole line drilling in 32 mm increments Vertical drilling unit with double spindle drilling heads freely positionable on index shaft 1.5 kW motor with 1400 rpm 1.5 kW motor with 2800 rpm Drill heads with pneumatic stroke Pneumatic material clamps Passage width approx. 850 mm Incl. various stops and drill bits Location: Röllbach Availability: short term

Condition: new, Bore diameter variabel mm Number of heads horizontal 1 St. Number of heads vertical 0 St. 1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10" touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ----- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ----- Nlmn9 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ----- 1 press-in station with dowel separation and press-in cylinder item 4 ----- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the injection unit item 5 ----- 1 processing unit with cross table, linear guide and 3NC axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm offset item 6 ----- 1 positioning controller Touch panel 10" color 500 drilling patterns can be created and saved, which can be easily accessed when needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connection With online control, the data for the control must be provided by the software be prepared. Our machine can then read and process this data. ----- Total price in this version Pos. 1 to Pos. 6: on request! Options with additional prices: ----- item 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed ??4,000 - 8,000 rpm, collet holder Pneumatic drill feed Surcharge: EUR 4,305.00 Additional accessories such as a larger touch screen, additional dowel station for additional dowel sizes or scanner for Program selection on request! Prices net plus statutory VAT, without packaging/shipping and without Installation. (technical data according to the manufacturer - without guarantee!)

Year of construction: 1983, Condition: used, with 2 drilling beam Ccw3Lip used, good condition manufactured by Scheer type DB 3 built in 1983 Masch.-No. 83120 number of spindles 25 piece number of drilling beams 2 Spindelabstand / grid 32 mm drilling from top hydraulic feeder brake 2 piece guide fence 1 piece ca. 2500 mm working width ca. 800 mm (768mm) drilling depth ca. 100 stroke drill chuck M 10 pendulum fence 3 piece clamp 3 piece drilling programs 4 piece required space ca. 1400 mm x 1300 mm x 1800 mm weight ca. 1000 kg located in 97447 Gerolzhofen, free on truck, unverpackt sale in current condition as seen, without revision, without guarantee and Gewährleistung

Condition: used, Year of construction: 1985, *Sale price-valid until 30.11.2024* I8Qgcp0Dk Used machine Year of construction: 1985 Condition: Functionally tested Technical data: For horizontal and vertical construction holes For vertical hole line drilling in 32 mm increments Vertical drilling unit with double spindle drill heads freely positionable on index shaft 1.5 kW motor with 1400 rpm 1.5 kW motor with 2800 rpm Drill heads with pneumatic stroke Pneumatic material clamps Passage width approx. 850 mm Incl. various stops and drill bits Location: Röllbach Availability: Short term

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Gcxj97N Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right / left with NC axis high / low programmatically, thus dimension input by folding / light measure possible, Dimension: LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg (technical data according to manufacturer - without guarantee!)

Condition: used, Year of construction: 1994, with stop system r - l with pneum. drill feed and chipping device with multi-spindle drill head with 8 drill spindles used, top condition, top equipment, many accessories make Hoffmann type HR 150 P year of construction 1994 machine no. 16002 work piece support right left swiveling drill holder shank chuck adapter plate for drill head holder dowel drilling device raster work piece stop center stop 2 pcs. stop ruler 2100 mm with folding stops pcs. 4 - r left pneumatic stroke digital displays automatic feed workpiece clamp pneumatic 2 new price approx. 18.000,00 € suction connection D 80 mm space requirement approx. 1100 mm x 1100 mm x 1200 mm weight approx. 450 kg storage place 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, 7Ji7U9I without guarantee and warranty

Condition: used, *Sale price-valid until 30.11.2024* Used machine Used dowel drilling machine from Ganner for frame and carcass joints Pot hinge and connecting fittings in System 32 Fully automatic pneumatic control with foot valve Clamping - drilling - separated, electric intermittent operation T-drilling beam 7 + 2 drilling spindles, pitch 32 mm Drilling unit can be swiveled by 90 Drill hole depth with drill 57 mm total length 0 - 27 mm with drill 77 mm total length 0 - 55 mm Shank diameter of the drill bit 10 mm Height adjustment (position) 0 - 80 mm Clamping height max. 80 mm Motor 1.1 kW Spindle speed 3000 rpm Compressed air connection 6 bar including various drill bits without tools and sharpening machine on the machine Availability: short term Location: Röllbach Hsr8Dln

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable Benqjzwlju 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)

Year of construction: 1979, Condition: used, from school operation used, good condition make Ayen type DB 1000 K 23 year of construction 1979 machine no. 7SA740 GS-tested number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic hole line drilling device Bvmampen storage location 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

Year of construction: 1997, Condition: used, *Sale price-valid until 30.11.2024* Used machine Year of construction: 1997 Condition: Well maintained/functionally tested Equipment and technical data: Number of drilling spindles: 21 pcs. in 32 mm pitch Drilling direction: Bottom & front Tilt: 0-90 degrees by handwheel Pneumatic material clamps: 3 pcs. Passage: Max. 100 mm in height and max. 640 mm in width Motor: 1.5 kW Suction diameter: 120 mm Incl. a variety of stops (see pictures) Availability: short term Yyzp0Svf Storage location: Hochheim

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 2Osh0Bb9 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: used, used manufactured by Ganner type Superdrill number of spindles 19 piece spindle distance / grid 32 mm hydraulic feeder brake guide fences 2 piece length ca. 3,0 m / 1,5 m working width 640 mm drilling depth 95 mm / 110 mm drill chuck D 10 mm pendulum fence 6 piece clamp 3 piece drilling unit frame dowel unit required space ca. 1400 mm x 900 mm x 1200 mm total connected power 1,5 kW located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen, Clu9Ubn without revision without guarantee and warranty

Condition: used, Year of construction: 1993, *Sale price-valid until 30.11.2024* Bd2Locsb97B Used machine Year of construction: 1993 Frame dowel and slot drilling machine Two-jaw chuck for tools up to 20 mm shank diameter Motor 1.5 kW Position adjustment for 2 levels, pneumatic (0-100 mm) Drilling depth max. 150 mm Precision raster rail with 12 mm raster with center locking and cross adjustment 320 mm 2 pneumatic safety clamping cylinders Slot drilling device can be lowered with 2 program cams Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 1995, with pneumatic stroke for drilling on 2 levels with rotatable drilling unit used, good condition, top equipment make Hoffmann-Dübelfix type DBL T 142 year of construction 1995 Masch.-Nr. 1342 CE type approved motor 1,4 / 1,8 kW workpiece support swivels to the right drill chuck 20 mm drilling depth 190 mm dowel drilling unit with 1 piece grid 12 mm workpiece stop motor speed 2 pieces 1400/2850 rpm. pneumatic stroke digital displays aggregate rotatable / swiveling 63° - o - 63° workpiece clamp pneumatic 2 pieces line laser new price approx. 17.000,00 € space requirement approx. 1400 mm x 1200 mm x 1400 mm weight approx. 400 kg storage place 97447 Gerolzhofen, free loaded, unpacked Gw38One handover in as-is condition as inspected without warranty and guarantee

Year of construction: 1980, Condition: used, *Sale price-valid until 30.11.2024* Dowel drilling machine Begkxva Year of manufacture 1980 Equipment and technical data: for horizontal and vertical drilling Horizontal position - for frame dowel work or construction drilling the side stops are positioned left and right in the mirror image using an adjustment gauge. Vertical position - drilling gear 90° rotatable with adjustable stop positions Drill motor 0.75 kW n = 2800 rpm Drilling gear standard 9 spindles Spindle distance 32 mm Drilling stroke 100 mm with hydraulic linear guide Air consumption per drilling operation 3.5 l Table size 1000 x 600 mm Working height 840 mm Gross weight 200 kg, net weight 130 kg Packaging dimensions 1200 x 1050 x 1700 mm Availability: short term Location: Hochheim Hochheim

Year of construction: 1987, Condition: used, used, cleaned, function checked,test run,manufactured by Jonsdorftype DÜBEbuilt in 1987mach.-no. 51223number of spindles 27 ber of drilling beams 1drilling from bottomtiltable pneumaticworking width ca. 900 mmdrilling depth 75 mmdrill chuck 10 mmclamp 2 d 32 mmlocated in 97447 Gerolzhofensale in current condition Coehsvos33

Condition: used, *Sale price-valid until 30.11.2024* Used machine very worn; no functional guarantee Technical data: Dppfnt Fully automatic pneumatic sequence control (clamping-drilling-unclamping) by means of a separate start button for each program separate start button for each program Drilling chip distance (hole center) min. 32 mm max 800 mm Distance between stop and drill hole row min. 10 mm max 550 mm Drill head 6 pieces Number of drilling spindles of the drilling head 2 pieces 2 motors 1.5 kW each Spindle speed 3000 rpm For horizontal and vertical construction drilling For vertical hole line drilling in 32 mm increments Vertical drilling unit with double spindle drilling heads freely positionable on index shaft 1.5 kW motor with 1400 rpm 1.5 kW motor with 2800 rpm Drill heads with pneumatic stroke Pneumatic material clamps Passage width approx. 850 mm Incl. various stops Location: Flörsheim Availability: short term

Year of construction: 1980, Condition: used, second handMake ScheerType DB 5Year of construction 1980Machine no. 508054Number of spindles 21 piecesNumber of drilling beams 1drilling from belowpivoted manuallyWorking width 800 mmDrilling depth 80 mmTensioner 2 piecesPitch 32mmSpace requirement approx. LxWxH mm1200x800x1300Weight approx. 300 kgTotal connection value 2.2 kWStorage location 97447 GerolzhofenHandover in the current condition as seen- free loaded - Coehvljfrf

Year of construction: 1997, Condition: used, *Sale price-valid until 30.11.2024* Used machine Year of construction 1997 Universal dowel drilling machine with drilling from below heavy cast iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any miter angle Drilling unit with digital positioning for 0-edge transfer, touch stops are used which transfer the tool thickness to the vertical bore during horizontal drilling to the vertical bore for hole line drilling, the stop system is slid into guides on the side of the machine table Cq2Vmvoui3 Working width 700 mm Portal passage max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles pitch 32 mm Spindle distance min. 32 mm Spindle distance max. 640 mm Space requirement L X W x H 960 x 630 x1140 mm Weight approx. 300 kg Availability: short term Storage location: Flörsheim

Condition: used, Used machine for dowel drilling in flat or end faces with roller bearing mounted drill shaft with conical claw coupling Driven by any hand drill working width 650 mm with 7 drill shafts Beiyfv3 pivoting drill beam 0° - 45° -90° Clamping height 80 mm smallest drill hole spacing 30 mm Availability: short term Storage location: Hochheim

Year of construction: 1981, Condition: used, *Sale price-valid until 30.11.2024* Used machine Year of construction: 1981 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control Crw2A8Mksz with 2 safety air clamps Drilling gear motor 2.2 kW with 21 spindles Spindle pitch 32 mm with attached oil damping Height adjustment 80 mm Drilling depth 80 mm with chassis Weight 420 kg Availability: short term Location: Solingen