Used Blown Film for sale (1,421)

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Kdedpfxjw Nhave Adwsg Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Kdedpfx Adov T An Soweg

Condition: ready for operation (used), A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible. Ksdpfxow R Dh Ej Adwsdg

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. It had been idle for the last year due to a change in the packaging process. The decision was made to sell it. Kjdpfoxp D D Njx Adwedg If you have any questions, I will be happy to answer them.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Technical specifications: Material: PP film (semi-rigid to soft) Material thickness: 500 microns (My) Maximum roll diameter: 780 mm Web width: 1050 mm Roll output weight: approx. 450 kg/h Core inner diameter: 152/143 mm (steel cores) Mandrel: 4-sided, 40x40x1600 mm (length) Core length: 1300 mm Guide roller width: 1300 mm Production speed: max. 16.5 m/min Web tension: max. 250 N, tension drop 30% Number of winding stations: 2 Winding direction: outer surface up Winding type: axial winding GS drive protection class: IP 23 DS drive protection class: IP 44 Voltage/Current type: 220/380 V, 50 Hz Air pressure: 6 bar Operator and drive side: right Kjdjya Ekyjpfx Adwjdg

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Machine requires repair! Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Original machine documentation and electrical schematics included. Manufacturer: M.J. MAILLIS GROUP (SIAT) Model: MANCON 1710 Year of manufacture: 2005 Kodpfjxfbfvex Adwjdg

Condition: new, Year of construction: 2025, operating hours: 300 h, functionality: fully functional, Flexor 440B Mono Film and Paper Slitting Machine Web width: 440 mm Unwind diameter: 800 mm Rewind diameter: 2 x 600 mm Standard rewind shaft diameter: 76 mm Kedpfxox U Tlpj Adwjdg Optional: various rewind shafts.

Condition: good (used), - Bundle packer for shrink films - Dimensions 1780 x 1480 x 2105 mm (L x W x H) - Working width 500 mm, good condition ready for use - Wide range of use, comes from current production - Connected loads 380V, 10A, 50Hz, 5kW - Price 1.500,00 € Kdjdpsr Ndi Ijfx Adweg

Condition: repair required (used), Year of construction: 2003, functionality: not functional, It is a complete line for film recycling. It was bought together as complete line. Components • Shredder TRI TUR TM 3 model with hydraulic drive and 75 kW motor. • Pre-washing tank for contaminated film. Bottom sludge discharge. Made of stainless steel! • Water grinder L5 650/1000 10 rotating and 4 stationary knives • Centrifuge Mainly available as a single item! Used, in good condition, has not been in operation for a long time, requires repair. Kdsdox Ddchspfx Adwog The grinder is currently in operation and can be viewed in Dunaújváros(Hungary) Check out our other products. (Re-pelletizing line, chiller...)

Condition: used, Film thickness control system Ksdpfx Ajcc Enlsdwedg -Manufacturer: LITOMAT -Type: AIS-AR-1016 -Number: 1x available -Price: per piece -Dimensions: 145/165/H75 mm -Weight 0.6 kg/piece

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar Kjdpfx Aovyq Duodwsdg -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Manufacturer: WEILEDER Model: WTK -40/55 PT Category: Packaging machine Year of manufacture: 2018 Location: Ex site Availability: Short-term Operational condition: Dismantled/in storage Technical Data Passage width: 400 mm Passage height: 200 mm Workpiece length max.: 550 mm Film width max.: 600 mm Number of rollers bottom: 1 Total units: 1 Longitudinal units: 1 Magazine slots: 1 Packaging stations: 1 Conveyor technology: Stepless feed Shrink film: Longitudinal film station Discharge: Automatic version Mobile device closure Sealing units Kedpfx Adeyatgcowsdg Conformity marking: CE marking Total connected load: 9 kW Space requirement length: 2.57 m Space requirement width: 0.87 m Space requirement height: 1.6 m

Condition: excellent (used), 1 piece fully automatic pallet wrapper with film pre-stretch Inv. no. 3635 Kjdpfxoya I Als Adwodg Manufacturer: Matco Type: A 716 - LOW * Can be loaded with a manual pallet truck!!! * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1600 mm * Max. wrapping height approx. 2400 mm * Own weight approx. 500 kg * In very good condition

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3587 Manufacturer: de Wit Model: WP 2 Year of manufacture: 2008 * Turntable positioning by fixed stop Ksdpfxeya Iuuo Adwodg * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Suitable for Euro pallets and block pallets!!! * Own weight approx. 500 kg

Condition: excellent (used), functionality: fully functional, Semi-automatic pallet wrapper Inv. no. 3574 Manufacturer: Robopac Kodpfxoya H Ume Adwsdg Model: Rotoplat 405 / FS * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2700 mm !!!! * Own weight approx. 450 kg * Suitable for Euro pallets and block pallets!!! * In very good condition!!

Condition: as good as new (ex-display), Falling-film evaporator – unused – The machine consists of three units that need to be connected in series: Ksdod Hb Acepfx Adwjdg - Evaporator (58 pipes), Length: 12.000 mm - Condenser (19 pipes), Length: 15.000 mm - Condenser (48 pipes), Length: ca. 15.000 mm All units are unused and made of stainless steel (AISI 304 / 1.4301). The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product. Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.

Condition: excellent (used), Automatic pallet wrapper with film pre-stretch Inv. no. 3694 Manufacturer: Siat Ksdjxz Ay Hspfx Adwedg Type: F1LP 15-LP * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height: approx. 2400 mm * Own weight: approx. 450 kg * Suitable for block boards!!! * In very good condition

Condition: used, Year of construction: 2003, functionality: fully functional, rotor length: 990 mm, rotor width: 650 mm, power: 110 kW (149.56 HP), For sale P.R.T. (Italian) Water Grinder used for shredding polyethylene film. 5x2 rotating knife 2x2 stationary knife. In good condition. With 110 Kw electric motor. Throughput 400-600 kg/h Rotor dimension W 650 x L 990 mm Please check our other machines (extruder, chiller, shredder...) Kjdpfox Rp S Rjx Adwodg

Condition: used, ECRM Mako46, A2 film imagesetter, HQ-RIP with PC Kdsdpex Ux Nyofx Adwog

Condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Kedpjkkcqqofx Adwedg Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. The machine can be demonstrated with power.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Ksdpfovkg H Tsx Adwedg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Year of construction: 2019, condition: like new (used), Automatic intermittent-motion machine designed in accordance with cGMP standards for wrapping with stretch film. Conceived primarily for the cosmetics and pharmaceutical markets, simplicity of design and high-speed output are its main features. Main features: Kodpfxoyb Tvtj Adwodg Servo driven motor guarantees reliability and synchronized movement even at high speed Machine and motors managed by PC Balcony style structure with clear division between mechanical parts situated at the rear of the machine and product flow at the front Ergonomic structure facilitates machine inspection and provides high workflow visibility Simple and linear construction for easy cleaning Speed, strokes and single group positions are set up from the PC by programmable logics, making correct machine set-up automatic and size changeover extremely quick and easy

Condition: used, functionality: fully functional, Fujifilm Luxel F-4080 Film Separator. The Luxel F-4080 is part of Fujifilm's Luxel family of image capture systems. It is a multi-laser imaging system that automatically scans a series of working images downloaded from a RIP server onto film, using an internal drum and a high-speed rotary device to scan the film. It processes the data for fast optical scanning, provides continuous film transport using a dual-cassette system, controls the delivery of cut and punched film to the developer, and controls the software system that manages all the main modules. A touchpad with menu windows in the form of icons and selectable buttons is used to operate the machine. Kdjdsv Rr Aaopfx Adweg Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Kdjdpfx Ajvbrfiedwog Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Ksdpfxowg Sgcs Adwedg Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.