Used Blow Film Extruder for sale (3,602)

Year of construction: 2009, condition: excellent (used), max in operation for 4 years die 700 mm dosing 1+3 components NGR trimming recycling - including Futec optical flaw inspection system manufacturing year 2009 Hsdpfxsxu N Iqo Adwsfb machine is designed for low-gel film production for the semiconductor industry - including Fuji dual turret automatic winder manufacturing year 2009

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Hfodpjwivdksfx Adwsb Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, Extruder is supplied by Reifenhauser, mechanical/automation is supplied by JWELL. All working in harmony and fully functional. The line is only used for trial production and almost brand new equipment. Quality test labrotory equipment iss also available upon request. Diameter: 150 mm L/D: 25 Extrusion height: 1.150 mm Extruder design: u-arrangement motor right side Installation: movable design Rails: including Drive cooling. air cooling with external fan Main drive nominated power: 80,00 KW Screw speed n1: 30,00 1/mln Number of heating-cooling zone: 4 Feeding zone tempering heating / cooling shell Heating capacity feeding zone: 14,40 KW Shield cooling yes Total heating capacity barret: 44,00 KW Heating capacity flange: 3,50 KW Barrel wear protection: R121 Barrel grooves. yes Machine colour RAL 7016 Contrast colour. RAL 9005 Screw removal: removal to the front Screw cooling: prepared - Type; Slot Die with coat hanger manifold and upper flex lip. - Polymer: EVA - Output: 300 - 400 kg/h - .Slot Width: 1350 mm - Up Opening: 0.05mm - 1.2 mm - Up Adjustment: Up adjustment of the upper flex lip with push only bolts on 25mm center lines. Hjdpfx Aov Erwysdwsfb - Manifold: Computer calculated coat hanger manifold for optimum polymer melt distribution. - Insulation: Die body insulation on upper and lower die body - Control Zones: 12 Zones (6+ 6 in upper/lower die body ♦ 2 sideplates) - Die body: Complete die manufactured from highest quality tool steel. DIN 1.2311 treated to 1000 N/mm - Coating: Hard chrome plated 25 - 35 pm Surface roughness flow channel Ra 0,08 - 0,1pm Surface roughness lip land Ra 0,03 - 0,05pm - Die Inlet: Middle back round - Bectric: Completely wired to customers demand (230 V) on multi pin plugs.Thermocouples installed and wired into multi-pin plug

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Hfedpfjw Tbr Hex Adwjb Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2.065.0, clamping force: 200 kN, New digital control from BBM. Two sets of extruder heads (see attached pictures). Hfjdpfx Adow Dcyboweb

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Hsdpfx Ajw Nhavjdwjfb Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: ready for operation (used), A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible. Hfjdpfew R Dh Eex Adwjb

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Hfedov T An Sopfx Adwjb

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. Hjdpfjx Uqyqsx Adwjfb The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Up to 85% dry matter content. The machine is practically brand new, only tested for a few hours. Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Possibility to test with your own materials.

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h Hfsdstxinaspfx Adwob The price refers to one line (exstruder+press)

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Hfedpfx Adox Apckoweb

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. Hfodoxp D D Njpfx Adwob It had been idle for the last year due to a change in the packaging process. The decision was made to sell it. If you have any questions, I will be happy to answer them.

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set - Suitable for single wall pipes up to 220mm Hodpfx Adjua E H Sewsfb

Condition: used, empty load weight: 5,720 kg, maximum load weight: 5,280 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 04/2021, suspension: air, tire size: 235/75 R 17,5, color: black, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * From 1 owner * Condition, see photos * Special low bed lowloader trailer from the premium brand GLORIA, type SO42 * New price in 2021 at € 174,000 net * Transport for lowered vehicles possible due to low loading height * Individual design and manufacture of Phantom Rider * Loading and unloading of the vehicle in less than 10 minutes * Vehicle doors can always be opened Hfsdpfev Dvuysx Adwob * Low bed length approx. 5,500mm x width 2,080mm * Distance between platform and roadway variable from 0 to 25 centimeters while driving up to 20 km/h * Normal driving height from 6 to 10 centimeters * Extremely smooth driving behavior thanks to air suspension and high deadweight of 6,000kg * Turntable for the front wheels of the vehicle makes steering movement possible during play * Rear axle can be hydraulically extended to the side * No excess width, unrestricted participation in road traffic * Steering can be controlled via master and slave hydraulics and can be adjusted for real effects * Steering can be locked * Compressed air connection * Tubular frame for 12x8 or 8x8 covering above the platform, height adjustable, can be quickly dismantled * Tubular frame for 8x8 covering in front of the platform, can be quickly dismantled * 24V battery for self-sufficient operation, thus also data bus release simulation * Total weight 11,000kg * Empty weight 5,720kg * Payload 5,280kg * * German vehicle * original ONLY 330,248 km * Body/structure: tractor unit * Engine 10.7 ltr. - 315 kW R6 diesel (OM 470) * EURO 6 standard * Trailer coupling * Total train weight 40,000kg * Axle load measuring device * Mercedes-Benz PowerShift gearshift * Gearbox 12-speed - Type: G 211-12 * Air conditioning * Driver assistance system: Attention Assist (fatigue detection sensor) * Driver assistance system: Lane departure warning * Driver assistance system: Stability control assistant * Residual heat utilization * Cruise control system (cruise control) * Electric windows If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, Polystruder Extruder with Berringer water ring Pelletizer, 250 HP, 3 phase motor, with screen changer, includes spin dryer, and hopper. Hedpfx Adsxd D I Dewefb

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, screw diameter: 75 mm, machine/vehicle number: DE27666, TECHNICAL DETAILS Output: 200–450 kg/h Screw diameter: 2 x Ø 75.0 mm L/D: 36D MACHINE DETAILS Control system: Siemens Materials: PE, PP, PS, ABS Hsdpfx Aox Npbpedwefb Drive: 143 kW (DC) EQUIPMENT Co-rotating twin-screw Degassing Note: Two screw elements are broken. A side feeder connection or S-cylinder can be offered separately.

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press Hfedpfxev Sva Ej Adwsb for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Hsdjx U A Iaopfx Adwofb +++++

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Machine requires repair! Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Original machine documentation and electrical schematics included. Hsdsxfbfvspfx Adwefb Manufacturer: M.J. MAILLIS GROUP (SIAT) Model: MANCON 1710 Year of manufacture: 2005

Condition: used, Year of construction: 2017, Overview The blowmoulder was built in 2017 by the manufacturer SIPA. The machine is until February 2026 in operation and can be visited. It is used in a mineral water factory. The blowing machine is in a very good condition due to regular maintenance. Technical data  Nominal capacity: 18.000 bph Nr. of moulds: 8 Last used formats: 0,5l 1,0l 1,5l Neck type: PCO-28-1810 Incl. preform feeding system Incl. preform cooling system Min. - max. bottle diameter: 50 - 125 mm Min. - max. bottle height: 80 - 349 mm Hjdpfjx Ti R Eox Adwjfb

Year of construction: 2016, condition: ready for operation (used), overall weight: 1,100 kg, total height: 1,960 mm, product length (max.): 2,120 mm, screw diameter: 45 mm, General Data Machine weight 1100 kg Hfedpjx D Edyjfx Adwsb Measurements height 1960 mm Dimensions Machine Length 2120 mm Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2016. It features a screw diameter of 45 mm and a length of 1350 mm, with a drive power of 23 kW and a maximum speed of 2486 rpm. The machine includes five heating/cooling zones and can handle a maximum air flow of 5 × 630 m³/h. If you are looking to get high quality extrusion capabilities consider the Krauss Maffei KME 45 XS machine we have for sale. Contact us for more information. Application Types Extrusion

Year of construction: 2023, condition: new, Main Products Shrink Film ,Packaging Film Usable Raw Materials LDPE, LLDPE, mLLDPE, MDPE, HDPE and their mixtures Film Width Maximum: 1600mm Minimum: 850mm Film Thickness LDPE: 25-100 Micron Die Diameter LDPE: Ø300mm Hfodpeiy N A Hofx Adwjb Layer Distribution (A/B/C) %25-%50-%25 Max. Mechanical Speed 150m/min Extruder Melting Capacity 550kg/h ±%10 LDPE, MFI: 0.7g/10min simple formula Maximum Throughput 400kg/h ±%10 Reference Thickness and Width 50Micron - 1400mm Reference Formula Parameters %80 LDPE + %20 HDPE MFI: 0.7-0,3 OPTIONAL EQUIPMENT (not included in the price) Description Qty Price 4 components Gravimetric Dosing System and Line Control 3 set € 51.000,00 6 components Gravimetric Dosing System and Line Control 3 set € 63.000,00 Corona Treater 1 $ 12.000,00

Condition: good (used), Year of construction: 1976, wire diameter range: Hodpfxod Im Nus Adwsfb a) single wire: 2,2 - 3,8 mm b) double wire: 2,2 - 3,4 mm nail length: 10 - 80 mm output: 300/600 nails/min.

Condition: good (used), - Unused - Maximum working width 700 mm - 2 rollers 1 x top 1 x bottom - Simultaneous wrapping of top and bottom side for many materials, glass, mirror splinter protection film, Hfjdpfjrhib Isx Adwob - metal, other smooth sheets - Roller conveyors available for supply and removal - Price on request

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Hsdpfxex D Rgyo Adwsfb Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion