Used Book Sewing Machine for sale (66,062)

Condition: good (used), Year of construction: 2021, functionality: fully functional, Barely used Bedpjvt Sgdjfx Aktslp

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Feeder type: Automatic sheet feeder (4D-Stream Feeder) Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Bedpfozpfiyox Aktjlp Total machine weight: approx. 3,200 kg Video available upon request!

Condition: ready for operation (used), Year of construction: 2000, Max. format X/Y: 320mm/520mm. Thread guiding from front and rear thread spools via thread guide rods, thread tensioning device and thread break monitoring, rear platform height-adjustable by handwheel, adjustable lateral support knives, adjustable signature stops for head and foot side, foot-side stop spring-loaded, signature delivery wheels with DC drive, speed continuously adjustable via potentiometer, lower delivery wheel stationary, upper delivery wheel oscillating, signature transport via adjustable transport chain with plastic transport elements, book delivery height-adjustable, lateral knives at the book delivery adjustable. Documentation available. Inspection possible by arrangement. Bljdpozuktzefx Aktop

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms • Shirts and sportswear • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Bljdjznlbyepfx Aktep Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: good (used), Schmedt hardcover book production line The machines are in very good condition and have seen little use. The set consists of the following machines: Blodpfx Aez S Uzisktsp – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziCoat Pro gluing machine (coater) – Schmedt BT-1 Board Trimmer (automatic board cutter) Includes documentation, spare parts, and glue.

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 450 mm, JUKI PS-800HB8045ZNZ – Programmable CNC Heavy Duty Sewing Machine – 800 × 450 mm For sale: JUKI PS-800HB8045ZNZ, an industrial, programmable CNC sewing machine in a Heavy Duty version, designed for precise sewing of technical fabrics, tapes, straps, and other textile products. The machine was manufactured in 2025 and has only approximately 200 operating hours. It is in very good visual and technical condition, practically like new. The unit is 100% functional, regularly serviced, and ready for immediate operation. The machine is located at our production facility in Gdańsk. It is possible to start it up, inspect it, and test it before purchase. Technical specifications * Manufacturer: JUKI * Model: PS-800HB8045ZNZ * Year of manufacture: 2025 * Operating hours: approximately 200 hours * Sewing area: 800 × 450 mm * Version: Heavy Duty – for sewing heavier materials * Control: electronic, programmable CNC * Automatic thread trimming * Sewing pattern programming * Control panel for operation and pattern programming * Possibility of importing patterns via USB * High accuracy and repeatability of sewing Additional equipment included in the price of the machine * Lower thread end sensor * Dedicated cassette / tooling for sewing MOLLE systems * Dedicated cassette / tooling for sewing mesh The additional tooling allows the machine to be used in the production of specialized textile products. Applications The JUKI PS-800HB8045ZNZ is ideally suited for the production of: Bljdpsz Dk Eyjfx Aktop * Tactical and military equipment * MOLLE systems * Backpacks, vests, and protective gear * Technical tapes and straps * Industrial textiles * Industrial filters * Mesh components * Other products requiring precise, repeatable sewing according to a programmed pattern Thanks to its large working area of 800 × 450 mm and the ability to program patterns, the machine is suitable for both serial production and the execution of specialized sewing operations. Technical condition The machine is used but is in near-new condition. * Fully functional * Very low operating hours – approximately 200 hours * Regularly serviced * Ready for immediate operation * Can be inspected during operation before purchase Location and sales conditions Location: Gdańsk, Poland The machine is available immediately. It is possible to view and test the unit at our production facility after prior arrangement. Sale is based on a VAT invoice. We can provide assistance with loading the machine. Additional photos and a video showing the machine in operation are available upon request.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Bsdpfx Aez Rk N Tektelp Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. Bedez Rk Nyjpfx Aktslp After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2D3BF00270, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 262 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, This premium lot consists of four JUKI DLN-5410 series industrial needle-feed lockstitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI DLN-5410N-7 is one of the world's most respected industrial needle-feed lockstitch sewing machines, renowned for its exceptional reliability, high sewing speeds and outstanding stitch quality. Its needle-feed mechanism synchronizes the movement of the needle with the feed dog, significantly reducing material slippage, seam puckering and ply shifting compared to conventional drop-feed machines. Ideal for denim manufacturing, workwear, uniforms, technical garments and other medium-weight industrial sewing applications. Bundle Contents Machine 1 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 23A-7222 Manufacturing Number: 2D3BE00023 Machine 2 Model: JUKI DLN-5410N-7 Year: 1999 Internal Reference: 26A-7003 Manufacturing Number: 2D3BF00270 Machine 3 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 27A-7226 Manufacturing Number: 2D3BE00024 Machine 4 Model: JUKI DLN-5410-7 Year: 2009 Internal Reference: 17B-7224 Manufacturing Number: DLNAJ38908 Technical Specifications Manufacturer: JUKI Corporation Model Series: DLN-5410N-7 (3 machines) / DLN-5410-7 (1 machine) Machine Type: Industrial Single Needle Needle Feed Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Maximum Stitch Length: 4.0 mm Needle System: DB×1 Blodpfxozmy Ace Aktsp Presser Foot Lift: 5.5 mm by hand / 13 mm by knee lifter Feed Mechanism: Needle Feed with Bottom Feed Lubrication System: Fully Automatic Centralized Lubrication Integrated Electronic Control System Automatic Thread Trimmer Automatic Backtacking Automatic Needle Positioning Industrial Sewing Table and Heavy-Duty Steel Stand Production Benefits • Needle-feed system minimizes material slippage and seam distortion • Excellent stitch quality on multi-layer fabrics • Consistent seam appearance at high sewing speeds • High productivity in continuous industrial operation • Reliable Japanese engineering • Proven long-term durability in professional garment manufacturing Why Purchase This Lot • Four matching production machines from the same factory • All machines used on the same production line • Consistent sewing quality across all workstations • Common spare parts inventory • Simplified maintenance procedures • Reduced operator training requirements • Cost-effective way to establish or expand a production line Applications • Denim manufacturing • Jeans production • Workwear • Uniform production • Technical garments • Medium-weight woven fabrics • Shirt manufacturing • Industrial garment production Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2011, functionality: fully functional, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, Matched Set of Five Brother Industrial Overlock Machines from the MASI JEANS Factory This lot consists of five Brother industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. Brother's industrial overlock machines are known worldwide for dependable high-speed operation, clean seam formation and low maintenance requirements. The lot combines two Brother FB-N210 4-thread overlock machines (2012) with three Brother FA-V92A-5050 4-thread overlock machines (2009) - one closely matched platform generation. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched overlock production set with common operating principles, shared spare parts inventory and simplified maintenance. Ideally suited for denim manufacturing, jeans assembly, knitwear, workwear and other applications requiring fast, durable overedging seams. Bundle Contents Machine 1 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 37B-7268 Machine 2 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 36B-7267 Machine 3 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 4B-7212 Machine 4 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 30B-7213 Machine 5 Model: Brother FA-V92A-5050-57-E3V Internal Reference: 31B-7214 Technical Specifications Manufacturer: Brother Industries, Ltd. Model Series: FB-N210 (2 machines) / FA-V92A-5050 (3 machines) Machine Type: Industrial 4-Thread Overlock (Serger) Sewing Machine Country of Manufacture: Japan 4-Thread Overlock Configuration Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Professionally serviced (ERMACO ISM service partner) Production Benefits • Factory-matched Brother overlock production set • One platform generation - common parts and know-how • High-speed overedging with clean seam formation • Reliable performance during continuous production • Reduced operator training requirements Why Purchase This Lot • Five professional Brother overlock machines • Matching machines from one factory • Complete overlock capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion Applications • Jeans production • Denim manufacturing Blodpeznyx Hefx Aktep • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing • Uniform production • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2MOBG00099, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, This lot consists of five JUKI MO-6900 series industrial overlock / safety-stitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI MO-6900 series is JUKI's high-end overlock platform, valued worldwide for high sewing speeds, excellent seam quality and long service life in continuous industrial operation. The lot includes both 1-needle overlock (MO-6904) and 2-needle safety-stitch (MO-6916) configurations. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched set with common operating principles, shared spare parts inventory and simplified maintenance. These machines are ideally suited for denim manufacturing, jeans assembly, workwear, knitwear and other applications requiring fast, durable overedging and safety-stitch seams. Bundle Contents Machine 1 Model: JUKI MO-6916R Internal Reference: 62B-V109 Machine 2 Model: JUKI MO-6916R Class: FF6-50H Internal Reference: 9-NoNr Machine 3 Model: JUKI MO-6904S Class: OF6-300 Internal Reference: 89B-7190 Manufacturing Number: 2M0BG00099 Machine 4 Model: JUKI MO-6916 (MO-6900 Series) Year: 2009 Internal Reference: 123A-H79 Machine 5 Model: JUKI MO-6916-12 Year: 2009 Internal Reference: 132A-K536 Technical Specifications Manufacturer: JUKI Corporation Model Series: MO-6916R (2 machines) / MO-6904S / MO-6916 / MO-6916-12 Machine Type: Industrial Overlock / Safety Stitch Sewing Machine Country of Manufacture: Japan 1-Needle Overlock and 2-Needle Safety Stitch Configurations Maximum Sewing Speed: Up to 7,000 stitches per minute (model-dependent) Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Production Benefits • Factory-matched MO-6900 series production set • High-speed overedging and safety-stitch seaming • Excellent seam quality on denim and heavy fabrics • Reliable performance during continuous production • Common spare parts across the production cell • Proven Japanese engineering and long-term durability Why Purchase This Lot • Five professional JUKI MO-6900 series machines • Matching machines from one factory • Complete safety-stitch capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion • Excellent investment for denim and workwear manufacturers Applications • Jeans production • Denim manufacturing • Inseam and side-seam safety stitching • Seam serging and overedging • Workwear manufacturing • Uniform production • Knitwear and jersey garments • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Bledpfx Akoznz Shjtop Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Dürkopp Adler 745-34-2B Automatic Pocket Sewing Machine – Additional Machines Available IMPORTANT PRICE INFORMATION: The advertised price applies ONLY to ONE Dürkopp Adler 745-34-2B automatic pocket sewing machine (10/16 mm). All other machines listed below are available for sale separately and are NOT included in the advertised price. Prices for these additional machines are available upon request. We are offering several Dürkopp Adler industrial automatic pocket sewing machines from our garment production facility. The machines are designed for the automatic production of piped, flap and welt pockets and are suitable for industrial trouser, jacket and garment production. Main machine included in the advertised price: Dürkopp Adler 745-34-2B – Automatic Pocket Sewing Machine – 10/16 mm – 1 unit Additional machines available (NOT included in the advertised price): Dürkopp Adler 739 991001 K3 – BVL Automatic – 2015 Dürkopp Adler 745-34-2A – Piped/Welt Pocket Automatic – 30 mm – 2 units Dürkopp Adler 1970 – Automatic Sewing Unit for Attaching Pocket Facings The Dürkopp Adler 745 series is designed for the automatic sewing of piped pockets, flap pockets and welt pocket openings. Depending on the machine configuration, the units are equipped for different pocket widths and production applications. All machines come from an industrial garment factory and were used in professional production. Please note: Photos in this advertisement may show several different machines. Only ONE Dürkopp Adler 745-34-2B is included in the advertised price. Bsdpjzzkurofx Aktjlp Location: Romania Sales options: Individual machines or complete package Additional machine prices: On request Inspection of the machines can be arranged. Additional photos, machine identification details and videos are available for serious buyers upon request. We welcome offers for individual machines or for the complete package.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles Bodpfxey Ipy Ao Aktjlp • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, working width: 220 mm, stack height: 640 mm, type of input current: three-phase, product height (max.): 220 mm, product width (max.): 640 mm, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Bjdpfx Akextau Estelp Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: new, Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 7IMB, working width: 420 mm, warranty duration: 6 months, operating speed: 500 mm/s, Komfi ImiJET-BE70 Book Edge printing machine Book edge printing machine offers special look to your books with possibility of personalized data printing. Semi-automatic operation: manual feeding and unloading of books, the printing process is controlled automatically. Printing heads using oil-based inks are easy to clean with minimum risk of stuck nozzles. Variable data (multi-page PDF), variable resolution (180 x 360, 360 x 360, 720 x 360 dpi) and variable multi-pass printing possible. Different adapters for wire-o binding, so covers and hard covers, flat piles to get the best result. Blsdpfxjziiduo Aktjp Options: Oil-based ink ready Manual feeding & unload Automatic print process Variable data & resolution Parameters: Production speed: 180 edges/hr Max. production speed: 30 m/min Paper weight 115-350 g/m2 Min. book dimensions: 100 x 100 x 5 mm Max. book dimensions: 420 x 420 x 70 mm Printing heads: 4x Konica Minolta For customers who want to stand out from the competition and offer unique printed products. Soft cover books, hard cover books, colored brochures, wire-o products, notepads, note blocks, business cards. Economical run due to less expensive consumables and low risk of stuck printing heads. High quality components used to guarantee reliable and low service production.

Condition: used, functionality: fully functional, We are offering this used Juki LK-1920HA bartack sewing machine, year of manufacture unknown, for sale. Model: LK-1920 Type: HA Serial number: 2L1-F01163 Country of origin: Japan Bodpfx Aez Da Auoktelp It does not include the top clamp, but these are easy to order. The standard three factory patterns (50, 51, and 52) are still installed, and it can, of course, be used for bartacking. If you have any questions or would like more information, please send us a message or call us.

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, RILECART PB796 Calendar and Wire-bound Book Binding Machine Binding Size: 600 x 700 mm Fully automatic calendar punching and binding line. Automatic calendar hanger insertion. Max Punching Thickness per Stroke: 4,5 mm (depending on pitch, material and width), Standard Binding Dia: 1/4" & 5/16", Standard pitch 3:1", Variable speed: 500 to 2300 pieces/hour, depending on size, thickness and quality of materials. Complete with exit conveyor. Mechanical Condition: Very Good Bjdpfxjz E S I Sj Aktolp Power requirements: 400 V, 3-phase. External air supply required. Delivery and installation service available. (POA)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, A set of machinery for garment manufacturing in very good condition and with little use. A list of the machinery is attached. Interested parties should send an email for more information. JUKI MP200NS Blsdey Ickzjpfx Aktop DURKOPP-ADLER 550-8-3 BROTHER 311HN COMEL MP/A COMEL BR/A/AC SIRUBA L382R-32 STEAM KIT SIRUBA 737K504 ROBOTEC 3300 MAIER 221-12-K-E MAIER 221-19/2-K SIRUBA 1381P DURKOPP-ADLER 173 ROTONDI VFRVE203 ROTONDI BL32 ROTONDI BL32

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Good morning, for sale is a complete IML set, which includes: IML DA 500 – 2017, an electro-pneumatic bookbinding machine, used for mechanically gluing the book block into the cover. IML DA 600 - 2017, used for embossing and shaping the spine in hardcover books. IML DA 2002 – 2017, a semi-automatic binding machine, used for assembling covers and endpapers in hardcover books or game boards. IML DA 175/c - 2019, a glue machine/machine for manually applying cold glue to paper and other materials with a basis weight of 80 to 500 g/m2. Price for the entire set: 63,000 PLN / 15,000 EUR. Blodpfx Ake Afcmfotsp

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, Professional Two-Needle Post Bed Machine DÜRKOPP ADLER 868-290020 M-TYPE (ECO Version) For sale is a top-class, industrial post bed machine from the renowned German brand Dürkopp Adler, model 868-290020 from the prestigious M-TYPE series. Manufactured in Europe (Czech Republic), guaranteeing the highest quality of workmanship and legendary component fit. The machine is in very good visual and technical condition – well-maintained, clean, fully functional, and ready for immediate use. 🌟 Key advantages of this unit: 🤖 Operator panel and automatic locking: The machine features automatic start and end locks controlled from an advanced control panel. The machine automatically and precisely secures the stitch to prevent unraveling, which significantly speeds up the sewing process, guarantees repeatability, and saves thread. Precise 3 mm needle spacing: A very dense, elegant, and desirable spacing. Ideal for luxurious edge stitching, delicate upholstery, and premium leather goods. The machine is equipped with a complete, original sewing set and is immediately ready for operation in this configuration. Powerful stitch length up to 12 mm: Allows for both standard construction seams and beautiful, very long decorative stitches, which are highly desirable in modern upholstery. Adjustable presser foot stroke up to 9 mm: The machine has manual adjustment of the presser foot stroke height. This allows it to “climb” and smoothly move over material thicknesses, transverse seams, or multiple layers of leather without slowing down or losing the stitch. Triple transport (feed dog, needle, presser foot): A robust mechanism that easily handles the heaviest materials. The machine sews perfectly evenly, without puckering or shifting the material layers – indispensable for thick leather, artificial leather, and upholstery fabrics. ECO version – Reliability and simplicity: A design devoid of complex electronics and pneumatics, eliminating the risk of costly failures of computer components. This machine is designed for trouble-free, long-term operation, in which the operator has full, manual control over each stitch. Energy-efficient motor with needle positioning: A modern drive provides quiet operation, high performance, and drastically reduced power consumption. The motor is equipped with an automatic needle positioning function, which significantly speeds up and simplifies the work (the needle always stops in the desired position, e.g., embedded in the material when turning the component). Bledpfx Aj Adl H Eektsp Application: The machine is ideal for professional workshops and production lines involved in: Automotive upholstery (seats, door panels, steering wheels, dashboards) Furniture upholstery (sofas, armchairs, mattresses) Heavy leather goods (bags, suitcases, belts, shoes) The machine is prepared for operation with a 3 mm spacing. For a decisive customer, there is also a technical possibility of configuring it for an 8 mm or 16 mm spacing. Delivery to the customer by courier is possible.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, JUKI PLC-1760-7 Post-Bed Heavy Duty Sewing Machine with Efka Variocontrol 820 & Kessler Stand (2011) Technical Data & Overview:Category: Textile & Leather Machinery / Industrial Sewing Machines Manufacturer: JUKI CORPORATION (Made in Japan) Model: PLC-1760-7 Year of Manufacture: 2011 Control Unit / Panel: Efka variocontrol 820 Table / Stand: Original heavy-duty Kessler ergonomic stand on casters Type: Twin-needle post-bed heavy-duty lockstitch machine with automatic functions Condition: Used, fully functional, clean, and in very good working condition Bedo Ahfi Eepfx Aktolp JUKI PLC-1760-7 Heavy-Duty Post-Bed Industrial Sewing MachineHigh-performance Japanese industrial post-bed sewing machine JUKI PLC-1760-7, manufactured in 2011. Perfect for heavy-duty stitching, upholstery, leather goods, automotive interiors, and multi-dimensional / 3D seams. Key Features & Equipment:Model: JUKI PLC-1760-7 (Automatic sub-class: thread trimmer, automatic backtack, foot lifter) Controller: Efka variocontrol 820 programmer panel Design: Twin-needle post-bed structure for easy handling of tubular, concave, and shaped items Stand: Original ergonomic Kessler stand with height adjustment, pedals, and heavy-duty wheels for mobility Drive: Industrial servo motor drive system Condition & Delivery:Clean, well maintained, complete, and fully operational. Located at our facility. Inspection and test runs under power are available by appointment.Palletizing, loading assistance, and worldwide shipping available upon request.Please feel free to contact us with any questions or to request a shipping quote.

Condition: like new (used), functionality: fully functional, A very nice book press is for sale. Brand: Mahez, size 485 x 560 mm. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it onto a truck or container. Bledpfxezwga No Aktep Please request a price including transport (within the Netherlands). Best regards, Henk Hoos

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase Blsdpfx Akszgw Ebotop • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Year of construction: 2019, condition: new, SEMIAUTOMATIC BOOK COVER POSITION MACHINE LJ308A Bledjfdzwyjpfx Aktjp -new machine

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Bljdpfx Akoz Dtcbetop Automatic book feed. Automatic format detection. 380V power supply + compressed air.