Used Book Press Machine for sale (67,389)

Condition: excellent (used), Year of construction: 1955, machine/vehicle number: 104 678 N, Format: A4 Number of Colors: 1 Cgedpfxsw Rb U Ns Aiaeu

Condition: excellent (used), Year of construction: 1970, machine/vehicle number: T171 074 N, WITH HOT FOIL STAMPING DEVICE Format: A4 Codpjw Rcrpsfx Aiajgu Number of Colors: 1

Condition: used, Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year 1966 Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Csdpsvuaqysfx Aiaogu Case size min. 125 x 210mm / max. 370 x 62 mm Speed up to 36 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Cgjdpfx Aisy Uiyvoaou Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Cjdpfx Ajy Uc Nkoiaogu Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 Cgsdpfx Aisv Hchloaeu R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: excellent (used), Year of construction: 2004, Perfecta Bookline S Age: 2004 Counter: 65.000 Books Size: 45 x 27 cm Speed: up to 1800 books/ hour • 5 clamps Cjdpfx Aiev T I R Soajgu • hand-feeding station with jogger • spine preparation with exhauster • hotmelt spine and side glue • premelter • coverfeeder (toploading), with scoring • Compressor Available immediately

Condition: used, book press Codpfx Aiszbx Tkjasgu

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Power supply: 400 V Flexible speed control. Cgsdpfxey Tu T Eo Aiaeu

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Cgsdpfx Aey Tu Txoiaeu Automatic format detection. 380V power supply + compressed air.

Condition: used, working width: 500 mm, Electric edge banding machine with integrated grooving unit. Feed width approx. 500 mm The following glue application rollers are included (the glue tank can be adjusted to match the width of the required glue roller): 1 x 13 mm width 1 x 15 mm width 1 x 17 mm width 1 x 19 mm width 1 x 21 mm width Cgsdpfx Aoytxw Heiasu 1 x 23 mm width 1 x 25 mm width 1 x 27 mm width 1 x 33 mm width

Condition: like new (used), Year of construction: 2025, Maufung MF-Smart390A Auto Book Casing In & Joint Forming Line Model: MF-Smart390A Power Supply: 380V, 50HZ Mainframe Power: 9kW Block Thickness: 2–60mm Block Size (Max): 390×297mm Block Size (Min): 100×100mm Mechanical Speed: 600 pcs/hour Machine Dimensions (L×W×H): 4950×2650×2000mm Machine Weight: 2000kg Maufung Head and Tail Banding Machine Model: MF-HBM420 Model: MF-HBM420 Power Supply: 220V, 1 Phase, 50HZ Mainframe Power: 1.5kW Air Compressor: 6Bar Machine Speed: 11 pcs/minute Book Block Thickness: 10–60mm Book Block Size (Max): 350×420mm Book Block Size (Min): 100×100mm Machine Dimensions (L×W×H): 700×850×1550mm Cgodpfsy Sv Insx Aiaju Machine Weight: 270kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 200 mm, table width: 1,000 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical press types operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety for large table and heavy die applications, thanks to their rigid frame construction. CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1000×2000 mm large table - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection (LEUZE) - Fast production change-over with 99 die memory settings Areas of Application - Punching/cutting/forming applications requiring a large table - Serial production with automated feeding lines - Heavy-duty dies and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch–brake • Additional bolted T-slotted plate • 8-guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed oil reservoir with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems Cedpfxjx N Ruqo Aiaogu • Sliding safety door at table front • Dies with custom specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max. shut height: 600 mm Min. shut height: 480 mm Side window dimensions: 600×600 mm Adjustment (ram adjustment): 120 mm Number of connecting rods: 2 pcs Number of eccentric shafts (cranks): 2 pcs Safety device: Hydraulic Switchgear brands: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 settings Mounting type: Floor standing Body type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 400 t, stroke length: 200 mm, table width: 1,200 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are a type of mechanical press that operate with force generated via an eccentric mechanism, ideal for cold forming processes such as punching, cutting, and forming. H-type (straight-side) eccentric presses provide high stability and process reliability in applications requiring large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton is engineered for high-output production, featuring a design focused on stable operation, die protection, and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance for continuous production demands. Key Advantages: - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection via hydraulic overload safety Cgedpfxsx N Rzwj Aiaeu - Precise guidance with 8-point guided ram and balancer piston - Controlled and user-friendly operation with PLC + touch screen interface - Maximum operator safety with light curtain protection system Typical Applications: - Punching/cutting/forming processes that require a large table - Mass production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel welded body construction • Pneumatic clutch and brake • Additional plate with T-slots • 8-point guided ram • Adjustable stroke with single connecting rod • Balancer piston in the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch-sensitive LCD screen • Motor reverse function • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety barrier • Enclosed oil tank with gear set • Double-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Custom die options as per requirements ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 3050 mm Press Depth: 3200 mm Press Height: 4700 mm Table Size: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 55 kW Weight: 51,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 200 mm, table width: 1,200 mm, table length: 2,200 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates with a force generated through an eccentric mechanism and is used in cold forming operations such as punching, cutting, and forming with dies. H type (straight-side) eccentric presses provide high stability and process safety for large bed and heavy die applications, thanks to their rigid frame constructions. The CRONOSSTECH CEHP 500 – H Type Eccentric Press 500 Ton is designed for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-guide ram system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages Csdpfex N R Ahsx Aiaegu - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precise guidance with 8-guided ram and balancer piston - Controlled, user-friendly operation with PLC & touchscreen interface - High operator safety with light curtain protection Areas of Use - Punching/cutting/forming applications that require a large table - Serial production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted additional sub-plate • 8-guide ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse movement • Hydraulic overload safety device • Motorized ram adjustment system • Light curtain safety guard • Enclosed gear group in oil sump • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard in front of the table • Custom die specifications as required ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Tons Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Size: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), pressing force: 80 t, table width: 660 mm, table length: 860 mm, punching force: 80 t, drop-through hole in table: 180 mm, stroke adjustment: 110 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates via a force generated by an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages: - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Typical Applications: Cgedpfx Aijvtx H Reasu - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection light curtain safety system • PLC control system • Dual-hand/foot control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety regulation compliant • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounting pads • Touchscreen LCD panel (standard between 150–300 tons) • Hydraulic safety system (standard between 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set to requested specifications • Eight-way slide guides ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–table distance: 420 mm Distance between side frames: 400 mm Ram adjustment (slide adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table size: 540×740 mm Die clamping hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Please inform us if you require modifications in the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are directly managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 80 t, table width: 600 mm, table length: 800 mm, table height: 850 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, Csdsvxhb Uspfx Aiasgu o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 720 mm, table length: 1,000 mm, drop-through hole in table: 220 mm, ram adjustment: 120 mm, stroke adjustment: 125 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: IMMEDIATELY FROM STOCK GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Body and welded parts will be stress relieved by vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards Cedpsvyrywsfx Aiajgu o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 150 Tons Table-Ram Distance 500 Mm Distance Between Walls 1080 Mm Ram Adjustment 120 Mm Press Approximate Width 1400 Mm Press Approximate Depth 1900 Mm Press Approximate Height 3000 Mm Table Hole Diameter 220 Mm Table Size 720 / 1000 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 900 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 15 + 0.75 KW Motor Speed 1450 RPM Approximate Weight 12,000 Kg

Condition: new, Year of construction: 2025, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, punching force: 200 t, drop-through hole in table: 220 mm, ram bore: 60 mm, stroke adjustment: 180 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates by force generated through an eccentric mechanism in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type 200 Ton Eccentric Press is engineered for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for high-volume production. Key Advantages: - Consistent stroke performance and high repeatability in mass production - Operator-focused safety design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Application Areas: - Cold cutting and punching operations - Cold shearing applications - Metal forming with dies - High-volume production lines Cjdpfxsvtyx Ie Aiaogu ✅ STANDARD FEATURES • Steel frame construction • Four-way guided slide • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD control panel (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set in requested specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Tons Throat depth: 340 mm Distance between table and slide: 500 mm Distance between slide and table: 600 mm Width between uprights: 510 mm Slide adjustment (shut height adjustment): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchoring dimension: 920 mm Side anchoring dimension: 1420 mm Table hole diameter: Ø240 mm Table dimensions: 680×1000 mm Die clamping hole diameter: Ø60 mm Slide dimensions: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 22 kW (29.91 HP), pressing force: 250 t, stroke length: 160 mm, table width: 700 mm, table length: 1,100 mm, throat depth: 350 mm, stroke adjustment: 150 mm, Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suited for serial production. Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready use with PLC control and dual hand/foot operation Applications: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES Cgjdpfjx N Nfbsx Aiaeu • Steel structure frame • Four-sided guided slideways • Spheroidal cast iron connecting rod and gear seats • Crankshaft and driven shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual solenoid safety valve • Manually adjustable stroke • Light curtain finger-hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die configured to your specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Table–ram distance: 520 mm Ram–table clearance: 630 mm Distance between side frames: 520 mm Ram adjustment (regulation): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchorage dimension: 930 mm Side anchorage dimension: 1430 mm Table bore diameter: Ø250 mm Table size: 700×1100 mm Die mounting hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: If you require changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 30 kW (40.79 HP), pressing force: 300 t, stroke length: 200 mm, table width: 700 mm, table length: 1,200 mm, throat depth: 370 mm, stroke adjustment: 150 mm, Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, utilizing force generated through an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key advantages Stable stroke performance and high repeatability in mass production Operator safety-focused design (light curtain + safety systems) Low maintenance requirement with centralized automatic lubrication Production-ready operation with PLC control + two-hand/foot pedal control Areas of application Cold cutting and punching operations Cold forming applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-way guided slide system Csdpjx N Nfhofx Aiaogu • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Ray barrier finger–hand protection safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies manufactured to required specifications • Eight-way guided slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Distance table–ram: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (stroke setting): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table bore diameter: Ø260 mm Table size: 700×1200 mm Die mounting hole diameter: Ø60 mm Ram size: 780×400 mm Table height from floor: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 SPM Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 440 mm, table length: 700 mm, punching force: 40 t, drop-through hole in table: 140 mm, ram bore: 35 mm, stroke adjustment: 80 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Ready-to-use operation with PLC control + dual-hand/pedal control Areas of Use: - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Four-sided slideway guide • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 alloyed steel • Central system fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double solenoid safety valve • Manually adjustable stroke • Finger-hand protection safety system with light curtain • PLC control system • Dual-hand/pedal operation system • Mechanical lock system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic protection system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die made to required specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between uprights: 330 mm Ram adjustment: 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage size: 575 mm Side anchorage size: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Cedpfx Aijvtx Axjasgu Die clamp slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10-70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: Please notify us if you require any modifications to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sale, commissioning, and aftersales processes are handled by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 130 t, table width: 750 mm, table length: 1,000 mm, punching force: 130 t, drop-through hole in table: 220 mm, ram bore: 55 mm, stroke adjustment: 140 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are a type of mechanical press powered by the force generated through an eccentric mechanism, commonly used for cold forming processes such as punching, cutting, and die forming. With high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 125 Ton is engineered for stable operation in cold forming applications. Its rigid steel welded body, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for series production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light barrier + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Production-ready operation with PLC control + dual hand/foot controls Fields of Application: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel welded frame • 4-sided slide guidance • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and transfer shafts made from 4140 hardened steel • Central fully-automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light barrier finger/hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor movement • Occupational safety regulation compliant • CE-conformant ✅ OPTIONAL FEATURES • Anti-vibration pads Cgedpfxjvtyvgo Aiaou • Touchscreen LCD panel (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • 1 die set tailored to specifications • Eight-point slide guide ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Tons Throat depth: 310 mm Distance table–slide: 500 mm Distance between slide and table: 510 mm Distance between uprights: 450 mm Slide adjustment (stroke adjustment): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchorage (footprint): 790 mm Side anchorage (footprint): 1250 mm Table hole diameter: Ø210 mm Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Slide size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please inform us if you require changes to the technical specifications. ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 15 kW (20.39 HP), pressing force: 160 t, table width: 920 mm, table length: 660 mm, throat depth: 320 mm, punching force: 160 t, ram bore: 55 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical presses that operate with force generated via an eccentric mechanism and are used in cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance for serial production. Key Advantages - Stable stroke performance and high repeatability in serial production - Operator safety-oriented design (light curtain + safety systems) - Reduced maintenance needs with centralized automatic lubrication - PLC control + dual hand/foot control for production-ready operation Application Areas - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided slide guidance • Spheroidal cast iron connecting rod and gear bushings • 4140 quenched and tempered steel crankshaft and transmission shafts • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Finger and hand protection with light curtain safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mountings • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare die plate • Decoiler, feeder, and straightener • One set of die to customer specifications • 8-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Bed-to-ram distance: 500 mm Slide-to-table distance: 540 mm Cgjdpfx Aisvtywdsaeu Distance between uprights: 500 mm Ram adjustment (stroke): 120 mm Approx. width: 1600 mm Approx. depth: 2280 mm Approx. height: 2750 mm Front anchoring size: 840 mm Side anchoring size: 1300 mm Bed bore diameter: Ø220 mm Table size: 660×920 mm Die mounting hole diameter: Ø55 mm Ram size: 600×290 mm Floor-to-table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approximate weight: 7100 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 125 t, table width: 700 mm, table length: 900 mm, drop-through hole in table: 210 mm, ram adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. Cgedpfx Aevxhqvjiaou TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Press Approximate Height 2850 Mm Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg