Used Book-Press for sale (12,715)

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg Bwsdju Nfv Uopfx Alfjw dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Technical details: pressure: 0,9 t daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation * Bwodju Nfw Sepfx Alfew

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- Bwedpsu R Sxxjfx Alfow ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Briquetting Press RUF RB 440 Hydraulic briquetting press made in Germany (RUF GmbH & Co KG). It presses sawdust and other wood residues into rectangular briquettes without binders. The machine is dismantled and in working condition. Technical data: Manufacturer: RUF GmbH & Co KG (Germany) Type: RB 440 Year: 1991 Capacity: 450 kg/h Compression pressure: max. 1700 kg/cm² Sawdust moisture: max. 14% Motor power: 30 kW Bwods Afxccopfx Alfsw Briquette size: 150 × 60 mm Voltage: 400 V, 50 Hz Dimensions (L × W × H): 1800 × 1800 × 1900 mm Transport height: 2200 mm Weight: 3000 kg

Condition: used, Briquetting Press UMP BP 420A Bodpfx Ale Afxkmsfoww Hydraulic briquetting press made in Lithuania (UMP). It presses sawdust and other wood residues into briquettes. The machine is dismantled and in working condition. Technical data: Manufacturer: UMP (Lithuania) Type: BP 420A Year: 2004 Motor power: 35 kW Hydraulic pressure: 300 bar Voltage: 380 V, 50 Hz Current: 100 A Weight: 3000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 90 l, overall weight: 1,800 kg, total length: 1,900 mm, total width: 1,350 mm, total height: 1,850 mm, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, CNC PRESS BRAKE 40 t × 1320 mm – NEW, 2026 – IN STOCK 2-axis (Y + X) hydraulic press brake with touchscreen CNC control Compact, accurate hydraulic CNC press brake with 400 kN (40 t) pressing force and a 1320 mm working table. Built for sheet-metal workshops that need repeatable bends, a fast set-up and a small footprint. The machine has passed the manufacturer's final inspection (report dated 9 October 2026, result OK). KEY FEATURES • MTP-3212 touchscreen CNC controller with 2 controlled axes: Y (ram / bending depth) and X (motorised back gauge) • Back gauge with 500 mm travel, 0.1 mm positioning accuracy, driven by a ball screw (Taiwan SHAC) • Repeat positioning accuracy of the ram: 0.1 mm • Rexroth hydraulic system, American hydraulic pump and Parker seals • Siemens main motor, Schneider electrical components • Quick-clamp system for the upper tools, standard punch • Foot pedal with emergency stop SAFETY (CE) • Light curtain protection at the front • Full-size rear door with power-off when opened • Large protective guards on both sides • Emergency stop on the control panel and on the foot switch • Electrical cabinet wired to CE standard TECHNICAL DATA • Nominal force: 400 kN (40 t) • Working table length: 1320 mm • Distance between uprights: 950 mm • Throat depth: 200 mm • Ram stroke: 90 mm • Open height: 300 mm • Controlled axes: 2 (Y, X) • Back gauge stroke: 500 mm, accuracy 0.1 mm, max. speed 100 mm/s • Ram speed: rapid 60 mm/s, working 15 mm/s, return 60 mm/s • Main motor: 4 kW • Voltage: 400 V, 3 phase, 50 Hz • Dimensions (L × W × H): approx. 1900 × 1350 × 1850 mm • Weight: 1800 kg (per nameplate) Bwedpfx Alsyr N E Eefow • Year of manufacture: 2026, new machine TERMS Available immediately from stock in our warehouse in Sokołów Podlaski. Price 8 900 EUR net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and operating manual included. Transport to any European destination – delivery quote on request.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Amada Type: HFP 20 50 Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled Bodpfxe Aazxcj Alfsww WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: good (used), Year of construction: 2008, Used 3-meter E Brake by Safan Bedpfxs Aazxis Alfsww Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Wila hydraulic top clamp Adjustable crowning Year of manufacture: 2008

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. Bwodpfov E Rm Hex Alfsw New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, End-of-project equipment for rebar processing – lot in Denmark Bjdpfe Agnf Ujx Alfeww Beton Mark S.r.l. is offering for sale a lot of rebar processing equipment acquired after the completion of the SBJV bridge works in Vordingborg, Denmark. The lot includes machinery from Schnell and OSCAM. The identified machines include, but are not limited to: - Schnell Bar Wiser Plus 26 multifunctional processing centre - Schnell Coil 16 Pack - Schnell Opti-Bat automatic cutting bench - Schnell Robomaster 40/12 processing centre - Rebar bending machines The equipment is for sale as a single lot. We will consider offers for the entire lot during a private negotiation. The published photographs are for illustrative purposes only and do not constitute complete documentation of all the equipment. Additional images and information can be provided upon request. To express your interest or submit an offer, please contact us, providing your contact details and the information you would like to receive.

Condition: used, Year of construction: 2016, operating hours: 17,381 h, functionality: fully functional, machine/vehicle number: 500015294, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, total width: 9,152 mm, total height: 7,749 mm, total length: 38,975 mm, type of input current: three-phase, input voltage: 400 V, input current: 213 A, overall weight: 30,000 kg, pressure: 300 bar, transport height: 2,800 mm, pressure (max.): 330 bar, opening width: 970 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, control cabinet length: 3,000 mm, oil tank capacity: 2,000 l, empty load weight: 25,000 kg, operating pressure: 300 bar, transport width: 2,500 mm, transport length: 12,000 mm, input frequency: 50 Hz, Equipment: documentation/manual, We are offering for sale a HSM VK 8818 R FU channel baling press (compact in-line version) with Stadler brand conveyor in very good condition. The machine has been maintained and serviced by manufacturer HSM throughout the past 10 years. The price covers the complete equipment, exactly as shown in the pictures. Bodpfxe Agbq So Alfjww Terms for sale: - The sale includes the complete equipment - Baling press, conveyor system, maintenance platform, wire stations, safety modules, documents, drawings, manuals - The buyer is responsible for dismantling and loading and transportation of the machine. If needed we can arrange dismantling and transport by 3rd party based on mutual agreement. - Complete service history and service reports are available for request For further information or to arrange an on site visit please contact us.

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Bwodpfx Ajv Al Tielfow Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm No. 5: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: Bsdpfx Aleu N Ay Rjfoww throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: excellent (used), Figure 1 provided by the manufacturer as an example. Remaining images are original. Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing force from below: Number of press chambers: 2 Maximum lamella width: 270 mm Maximum glue-laminated timber length: up to 18 m Glue-laminated timber profile: straight Lateral alignment of the lamellas: included Pressing system: hydraulic Bodshtd E Aepfx Alfjww Permanent pressure control: included Packaging: separate Loading/unloading: in the longitudinal direction

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 70300 € 1328.67 € 110 to 900 mm 540 mm 180 mm 14 - 114 mm Bwsdpoynnbkjfx Alfsw 60 1/min 490x325 mm 90 mm 280 mm 7.5 kW 1870 mm 1320 mm 2800 mm 5600 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises. Bwsdjyr I Hnepfx Alfow

Condition: excellent (used), Xerox Versant 4100 Including: Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) Bedpfsychr Esx Alfsww FIM (Feeder and Inserter Module) C/Z fold unit Booklet maker The machine is in perfect working order!

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors Bwedpfoyhggrjx Alfjw • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Bwodpfsy D Abfox Alfow

Condition: used, Year of construction: 2015, machine/vehicle number: 663462, functionality: fully functional, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Type: STE341-7210 SF device Power: 0.5 kW Power supply: 230/3/50-60 V/A/Hz Control voltage: 24 VDC Protection rating: IP54 Pre-fuse: 16 A The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling. Bodpfowtgpxex Alfsww

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Specification: V: 3x380-400 Watt: 25,900 Hz: 50 Bjdpfjwu Adbsx Alfsww The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Bwodswiqq Sopfx Alfew Türkei 74300 € 1404.27 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: new, Year of construction: 2026, neu 2026 070225 prompt, Zwischenverkauf v Türkei 33700 € Bedpfx Aewirbxslfeww 643.67 € 1 30 to 2 mm 400 mm 600 mm 150 mm 1 - 60 mm 140 1/min 4 60 mm 40 mm 200 mm 300 mm 3 kW 1300 mm 1150 mm 2050 mm 1670 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Options: vibrations pads € 132,- bolster plate € 720,-

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Bwsdpjxgpaqefx Alfow Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Bwsdpfxjzl E Sao Alfjw Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control