Used Boring System 23 for sale (43,805)

Condition: excellent (used), Turntable length: 3330 mm Max. load capacity: 500 kg Rotational speed: 16 rpm PANASONIC robot – serial number A0225 M Max. payload: 6 kg Reach: 1374 mm Nksdpfxjw U Agbo Adwot Control unit: YA-1TCR61E00 Safety cabin with ALBANY ASSA ABLOY doors Dimensions: 9400 × 2600 × 2900 mm Weight: approx. 5000 kg

Condition: excellent (used), Year of construction: 2007, load capacity: 5 kg, arm reach: 704 mm, Fanuc LR Mate 200 iC robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Nkodpfx Ajqgck Dsdwst Control system: R-30iA MATE Number of axes: 6 Load capacity: 5 kg Reach: 704 mm Repeat accuracy: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56

Condition: excellent (used), For sale: Professional ETAS measurement and interface set used for development, testing, and calibration of ECU controllers in the automotive industry. Manufacturer: ETAS Application: R&D, test benches, ECU calibration, INCA / ASAP3 ⸻ Set includes: • ETAS ES891.1 – interface/measurement module (ES800 family) • ETAS ES165.1 – Automotive Ethernet interface • Complete set of original ETAS cables (CAN, FlexRay, Ethernet, interface cables) • Adapters (including F-00K-103-786 – visible in the photos) • Original ETAS documentation • Everything exactly as shown in the photos ⸻ Applications: • ECU data measurement and logging • Calibration of engine and vehicle control units • CAN / FlexRay / Automotive Ethernet communication • Work with ETAS INCA, testing and research environments • Automotive laboratories, R&D departments, technical universities Nkodpfjyc Iiqox Adwst ⸻ Condition: • Equipment in very good technical condition • No mechanical damage • Connectors clean, undamaged • Normal, slight signs of use • Devices fully functional

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t Nkedsycqy Eopfx Adwot tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2025, condition: used, PC Board breaking and recycling systems - pre - breaking machine Nkodpfxetuuh Ue Adwst

Year of construction: 2023, operating hours: 898 h, condition: used, machine/vehicle number: 116593, Max. workpiece length: approx. 800 mm, Movement axes: X-axis: approx. 20 mm, Y-axis: approx. 250 mm, Z-axis: approx. 1,000 mm, 1 quenching medium/generator water system, consisting of: 1 1,000-litre quenching medium tank, 1 600-litre generator water tank, stainless steel supply lines, 1 coolant filtration system, 1 air filtration unit IFS Vario M 1600, year of manufacture: 2023, serial no.: 568269-2, net weight: approx. 85 kg Njdpex Akk Aefx Adwokt

Condition: new, Year of construction: 2025, heavy-duty construction with cast iron table smooth movements using hand lever and handwheel eccentric clamping device dowel drilling unit with 16-22-25-32 mm grid 2 spindle speeds: 1500/3000 rpm WESCOTT drill chuck 1 - 16 mm CE compliant Work table dimensions: 287 x 550 mm Longitudinal travel: 200 mm Vertical travel: 160 mm Cross travel: 125 mm Three-phase motor power: 1.8 kW, 400 V, 50 Hz Nkedpoycg U Ejfx Adwst

Condition: excellent (used), Drilling machine for turned components Triade Nkjdpeyabz Iefx Adwot Number of drilling units: 3 Drilling depth: 100 mm per side

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg Nkjdpoya Hl Sofx Adwst ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: Nsdpfxeyaq Ido Adwekt - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Drilling machines for turned parts TRIADE FR-3 V-V Nedsx Uyfpjpfx Adwokt

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker - Steel impeller - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2022 - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Njdjxdkzqjpfx Adwskt Reference: R-L0CE0

Condition: used, functionality: fully functional, Tumbler with cooling system Manufacturer: Gunther Model: GPA 500K Made of stainless steel Dimensions: 2200 x 1650 x 2550mm Volume: 500 liters Electric power: 3.5kW Nksdpfjwd I E Aox Adwjt

Condition: new, Setting total time Nkedpfxoul T Uij Adwet Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW Nkodjul Ua Tepfx Adwot

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Nodpjyb Rpdjfx Adwskt Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: used, mileage: 5,70,370 km, power: 265 kW (360.30 HP), first registration: 04/2014, fuel type: diesel, number of seats: 52, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, General Engine: MAN Emission standard: EURO 6 Total seats: 52 Passenger seats: 49+2+1 high/fixed Standing places: 90 Transmission: Automatic Safety Nksdpfjyc Iv Rjx Adwot * Retarder * Intarder * ABS, ASR, EBS * Fog lights * Immobiliser * Reversing camera Passenger compartment * Auxiliary heater * Air conditioning * Double glazing * Driver's microphone * Pram/stroller area * Wheelchair ramp * Wheelchair space * Stop request button * Interior camera Audio, Communication, Electronics * Radio * USB port on multimedia system Exterior * Matrix/destination display Lawo * Double-width door quantity: 4 * Lifting/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Miscellaneous * German vehicle registration certificate * Twin tyres * Vehicle length: 17.98 m * Vehicle width: 2.50 m * Vehicle height: 2.98 m * Tyre condition: front axle approx. 30% * Tyre condition: middle axle approx. 30% * Tyre condition: rear axle approx. 60% Our internal vehicle ID: 12043 Subject to errors. Images and text may differ from the actual vehicle. Always over 300 vehicles in stock.

Condition: used, mileage: 6,29,571 km, power: 265 kW (360.30 HP), first registration: 04/2014, fuel type: diesel, number of seats: 52, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, General Engine: MAN AdBlue Emission standard: EURO6 Total number of seats: 52 Seating configuration: 49+2+1 high/fixed Standing places: 90 Transmission: Automatic Safety * Retarder * ABS, ASR, EBS * Fog lights * Immobiliser * Reversing camera Passenger compartment * Auxiliary heater * Air conditioning * Double glazing * Driver’s microphone * Pram/stroller space * Wheelchair ramp * Wheelchair space * Stop request button * Interior camera Audio, Communication, Electronics Nkodpfxsyc Ivwe Adwet * Radio * USB port at multimedia system Exterior * LED matrix/destination display Lawo * Number of double-width doors: 4 * Lift/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Miscellaneous * German vehicle registration document * Twin tires * Vehicle length: 17.98 m * Vehicle width: 2.50 m * Vehicle height: 2.98 m * Tires front axle approx. 50% * Tires middle axle approx. 50% * Tires rear axle approx. 50% Our internal vehicle number: 12041 Errors excepted. Images and text may deviate from the actual vehicle. Always over 300 vehicles available.

Condition: used, mileage: 5,91,243 km, power: 265 kW (360.30 HP), first registration: 04/2014, fuel type: diesel, number of seats: 52, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, General Engine: MAN AdBlue Emission Standard: EURO6 Total Seating Capacity: 52 Seats: 49+2+1 high/fixed Standing Places: 90 Transmission: Automatic Safety * Retarder * ABS, ASR, EBS * Fog lights * Immobiliser * Reversing camera Passenger Compartment * Auxiliary heating * Air conditioning * Double glazing * Driver’s microphone * Pram/stroller bay * Wheelchair ramp * Wheelchair space * Stop request button * Interior camera Audio, Communication, Electronics * Radio * USB port at multimedia system Exterior * Lawo matrix/destination display * Double-width doors quantity: 4 Nksdpfx Aeyc Iv Djdwst * Raise/lower system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Other * German registration certificate * Twin tires * Vehicle length: 17.98 m * Vehicle width: 2.50 m * Vehicle height: 2.98 m * Tyres: front axle approx. 50% * Tyres: middle axle approx. 50% * Tyres: rear axle approx. 50% Our internal vehicle number: 12042 Errors excepted. Images and text may diverge from actual vehicle. Over 300 vehicles constantly in stock.

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Height: 5,853 mm Diameter: 1,695 mm Nodjx U Amiepfx Adwskt Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Type: HRV 56N-400/M GL360 Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: excellent (used), functionality: fully functional, Drilling machines for turned parts TRIADE FR3 Nodox Ty Uhspfx Adwokt

Condition: like new (used), For sale is a used Felder AF-12 extraction unit with a maximum air flow rate of 1,350 m³/h. The machine is in like-new condition and has been inspected and serviced by our qualified staff. Technical specifications: - Extraction capacity: 1,350 m³/h - Maximum negative pressure: 1,800 Pa - Chip collection volume: 100 liters - Extraction connection diameter: 120 mm Nodpfxoycdqwj Adwokt - Motor power: 1.5 kW / 2 HP - Year of manufacture: 2025, like new The extraction unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction unit, dust extraction Reference: R-H705E

Condition: like new (used), For sale is a used Felder AF-22 extraction unit with a maximum air flow rate of 3100 m³/h. The machine is in like-new condition, has been inspected and serviced by our qualified staff. Technical data: - Extraction capacity 3,100 m³/h - Max. negative pressure 2510 Pa - Chip container volume 2 x 200 litres - Extraction port Ø 160 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2025, as new The extraction unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction unit, dust extraction, wall-mounted extraction Reference: R-R04D8 Nedoycdbvspfx Adwjkt

Condition: excellent (used), functionality: fully functional, Drilling machines for turned components Genini TR4 Njdpfxsx Tuvys Adwskt

Condition: excellent (used), Drilling machines for turned parts TRIADE FR5 Nkedjx Tupyjpfx Adwst