Used Bottle Filler for sale (1,803)

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Nsdpsu Thpnefx Ag Njwc Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Hot washers with recirculation systems Sink-float separation stage Post washer and recirculation system Nwjdpeyhc S Rjfx Ag Njc (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. Nwodpfsyhc Sdox Ag Noc - Filler / capper model Weighblock 16/1440 6/540 P. - Labeller model Extra HM 4/720 Sa1 E1. - Packer model Acepack 2/4T. - Carton erector model Formapack H. - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. - Coders, handle applicators, elevators and conveyors. - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Condition: used, Used Framax glass bottle filling line with capacity approximately 2900 bottles / hour made in 2017 and used for approximately 2500 hours. Nwjdpjyhc Rtjfx Ag Nec Equipment includes isobaric bottling machine model Modulblock RFC1-16/16/1-DPS/C and also depalletiser, packer (box former, 24 bottles/box). Previously used for craft beer and RTD (Ready To Drink) carbonated pre-mixed alcoholic drinks. Equipment list and additional photos available on request.

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available Nwedpfx Agsvy D Ade Noc

Condition: used, Year of construction: 2020, Overview  This semi-automatic can filling machine was built in 2020 by the Italian manufacturer EMMA SRL and is in excellent condition as it has been regularly serviced by the manufacturer. The machine is immediately available and is being sold due to a capacity expansion by a larger model from the same manufacturer. Technical details Output: approx. 350-400 cans per hour Formats: 330 ml (Sleek); format parts for 440 ml included Filling system: Isobaric with CO₂ pre-ventilation, CO₂ tunnel, CO₂ lid gassing Seaming: Integrated single-head can seamer Power supply: 0.8 kW, 220V, 50 Hz Compressed air consumption: 180 L/min at 6 bar Dimensions (L x W x H): 1100 x 1130 x 1160 mm Weight: 280 kg Nedpewrixyofx Ag Nswc

Condition: used, Year of construction: 2006, Overview This bottle dryer was manufactured in 2006 by ACI and was integrated into a 30,000 bph PET bottling line to dry PET bottles before labelling. It is in full working condition, already dismantled, stored in a warehouse, and immediately available. Technical Details Capacity: 30,000 bph Formats: 1.5 L PET bottles Application: Drying before labelling Nsdpfx Agsw Rc Ide Njwc

Condition: used, Year of construction: 2022, Overview  This dual isobaric counter-pressure filling line for bottles and cans was manufactured in 2022 by the Spanish company González Tratamiento. The system includes a Firulais 6 Latas-Botellas filler and MPC-AS self-adhesive labeller, offering a compact and flexible solution for small and medium-sized breweries or beverage producers. The filler is still in operation and was maintained regularly. The owner is selling it because the equipment exceeds their current production capacity. Technical data  Capacity: Up to 2,000 bph (operated between 500–1,000 bph) Filling System: Isobaric, counter-pressure Filling Valves: 5 Bottle Formats: 0.33 L and 0.75 L (adjustable) Can Formats: Standard 0.33 L Closure Systems: Integrated can seamer and crown capper Construction: Stainless steel Working Pressure: up to 3 bar CO₂ System: Pre-evacuation for cans, vacuum for bottles Controls: Touchscreen with adjustable parameters Mobility: On wheels with adjustable legs Condition: In use, regularly maintained Scope of Delivery  Filler | González Tratamiento | Firulais 6 Latas-Botellas | 2022 | 5-valve isobaric filler with integrated can seamer and crown corker Labeling machine | González Tratamiento | MPC-AS | 2022 | Self-adhesive labeler, wrap-around, for various bottle sizes, incl. thermal printer for compliance and expiry date marking   Njdpfx Agjxn Uf Is Nswc

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  Capacity: 44,000 bph (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: Isobaric (mechanical filling system) Number of filling stations: 144 Crowner: 24 stations (crown cork) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: Air-conditioned, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Direction: Left to right Scope of Delivery Filler: KHS Innofill DMG SVF 144-KK24 Crown corker with 24 stations Control cabinet and operator panel Bottle clamping star wheels CIP cups High-pressure injection (HDE) Bottle shower at discharge Bottle table in roof optic Central lubrication system VPN remote access capability Safety housing (updated in 2016, with flushing system) Touch panel Cork feeding unit by NSM Filling level inspection system: Krones Checkmat (2015) Nodpfowif Dgjx Ag Njwc

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pick&Place neckhandling system Integrated foaming system Neumo butterfly valves Nedpfxowiizpo Ag Nowc

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data Capacity: Up to 600 bags/hour (depending on product viscosity and format) Volume range: 0.5L – 3L Pressure: min. 6 bar Bag type: Doypack with screw cap Filling principle: Gear pump with high-precision flowmeter Operation: Semi-automatic (manual bag positioning, automatic filling and capping) Frame: Stainless steel Cleaning/Sterilization: Integrated cleaning and sterilization functions Control panel: Touch screen Scope of Delivery  AIT DOYPACK semi-automatic filling and capping machine Integrated gear pump and flowmeter Touch screen control panel Njdewiu Hkopfx Ag Nowc

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel Nodpfx Agsvl Huao Nswc

Condition: used, Year of construction: 2015, Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V   Nsdpfx Asxd Ez Esg Nowc

Condition: used, Year of construction: 2008, Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, k, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling machine: P.E Srl 8T.540.1S.1E Shrink tunnel: k Tunnel 70S Shrink wrapper: k Nice Wrap35 SFUSO Handle applicator: Comag H 40/1 Palletizer: TMG Inkjet printer: Domino A200 Njdpfx Aswz H Ahjg Nswc

Condition: used, Year of construction: 2012, Overview The filler was built in 2012 by Italian manufacturer Framax. The filler comes with a Framax labelling machine. The machines have been regularly maintained and is already dismantled. Both machines can be viewed in person. Techn. Details Capacity: 1,800 bph (max. 2,200 bph) Processed format: 0,33 L Crown cap Filling monoblock | Framax | RFC‐09/08/1‐C 2K A/P | 2012 Rinser positions: 9 Filler positions: 8 Capper positions: 1 Suitable for natural beer Type of filling valve: EVO2 (15 mm) Max. diameter of bottle: 115 mm Min./ Max. height of bottle: 200 mm/ 350mm Dimensions: Length: 4,500 mm Width: 1,250 mm Height: 2,500 mm Njdpsrlf Tqjfx Ag Newc

Condition: used, Year of construction: 2021, Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Cap hopper  Cap control Nwjdjmk I Dtjpfx Ag Njc

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Nwjdpfxjtrbrqs Ag Nec

Condition: used, Year of construction: 2013, Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color) Nwodpfx Aeukafrog Nec

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Nedpfxeukkvne Ag Njwc

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer Nwsdpfx Aeyb R Uaeg Noc

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications Output: 7,800 bph Producs: Beer and CSD Formats: NRW 0.5 l 0.33 l ring neck 0.25 l LN Machine List  Machine type: Decrater Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (Screw Cap) Manufacturer: Rink Decapping in the crate Euro 0,5l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. Pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 Valves Year of manufacture: 2012 With Combi Capper 4 heads(Crown Cork and Screw Cap) Capacity: 7,800 bph Machine type: Labeling machine Manufacturer: Krones Model: Robusta Refurbished in 2012 10 Bottle plates 2 Label stations with 4 grippers and 4 glue pallets Inkjet printer Machine type: Crater Manufacturer: BMS Year of manufacture: 2012 Crate format: Modul Crate 4x5 Nwjdpjyb Sbuefx Ag Njc

Condition: used, Year of construction: 1966, Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  Capacity: 2,500 bph Formats: Prepared for 0.33 L Longneck Filling temperature: 6°C Overhaul & refurbishment details General overhaul in 2016: Pre-evacuation New rotary ball connection New stainless-steel table New electrics New valve control cabinet in stainless-steel design 0.33 L guiding set Sihi vacuum pump Renewed in 2023: Seals on lifting cylinders and filling valves Vacuum and overpressure valves equipped with new seals and springs Nwsdoyb Sdvopfx Ag Nec

Condition: used, Year of construction: 1983, Overview  This bottle washing machine was manufactured in 1983 by Italian company Silmo (model Praktika). The machine was part of a filling line with an overall output of 2,500 bph and is available immediately. Technical data  Capacity: 1,000–2,800 bph at 30-second cycle 1,900–5,600 bph at 15-second cycle (Was operated in a line running 2,500 bph) Formats: Prepared for 0.33 L Longneck Bottle rows: 12 bottles per row Special features: Label removal   Nwsdsyb Sxtopfx Ag Noc

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) Capacity: Up to 3,000 bottles/hour (330 ml) Filling system: 12 counterpressure long-tube valves Capping system: 4-head crown capper (26 mm) Bottle format: 0.33 L (prepared) Working pressure: 2.0 – 2.2 bar Working temperature: 0 – 4 °C (optimal) Oxygen pickup: 10–12 ppb dissolved oxygen Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump Product pump: Included CIP system: Automatic and programmable Machine direction: Left to right Construction: AISI 316L stainless steel Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) Capacity: 2,000 – 6,000 bph Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm Labelling stations: 1 (option for second station) Label type: Self-adhesive (also supports polypropylene labels) Bottle infeed: Screw conveyor system Sensors: Self-adjusting photocell for transparent labels Control system: Processor board with inverter-based speed regulation Output system: Smoothing unit with adjustable perforated belt Transport system: 1.5 m conveyor with traction motor Rotary tables: 1 infeed + 1 outfeed, both motorized Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer Function: Seals top and bottom of cartons Adjustments: Width and height adjustable Conveyor: Plastic rollers, 1.5 – 4.5 m   Njdpfxeyb S S Hs Ag Nowc

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Labelling machine | Krones Contiroll | 2004 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009 Njdsyb Tuiepfx Ag Njwc