Used Braiding Machine for sale (64,658)

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Imatec Type: BM153-G-M3 Year of manufacture: 1974 Machine type: Tool milling machine SPINDLE Speed range: 10–510 rpm WORK TABLE Table dimensions: 1,100 × 260 mm Table slots: 3 Clamps: 2 CONTROL Digital display: 3-axis digital display, Fagor Gkjdpfs Ad Iwgex Adksd MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,500 mm Height: 1,800 mm Weight: 800 kg EQUIPMENT 3-axis digital display, Fagor Work table with 3 slots 2 clamps

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, overall weight: 4,900 kg, grinding length: 630 mm, center height: 140 mm, grinding diameter: 275 mm, machine/vehicle number: 0116, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 2nd, 2026, and December 3rd, 2026! TECHNICAL DETAILS Maximum height: 140 mm Circumferential diameter: max. 275 mm Grinding length: max. 630 mm Grinding diameter: max. 275 mm Workpiece weight: max. 250 kg Workpiece weight during chucking operations including clamping device: max. 40 kg Spindle taper: MK 5 Tailstock center: MK 4 Drive motor: 1.1 kW Spindle travel: max. 6 mm Speed: 0.06–10 mm/min Quill stroke: max. 32 mm Tailstock center: MK 4 Cylinder compensation: ±0.1 mm/diameter Division mark: 0.002 mm/diameter Table speed: 0.05–5 m/min Table travel: max. 810 mm Godpfj Ai Sixox Adkokd Table dwell time at reversal points: 0–5 s Table adjustment per handwheel revolution in coarse mode: 20 mm Table adjustment per handwheel revolution in fine mode: 2 mm Automatic feed rate during longitudinal grinding: 0.001–0.06 mm/diameter Swivel range of the top slide: +11° 40′ / −5° If the swivel angle exceeds +11° 40′, the tailstock support must be removed. Quick traverse: 70 mm Feed: 100 mm Coarse adjustment: 355 mm Grinding wheel diameter: 500 mm Grinding wheel width: max. 100 mm Grinding wheel bore: 203.2 mm Drive power: 7.5 kW Grinding wheel peripheral speed: 35/50 m/s MACHINE DETAILS Grinding wheel diameter: approx. 480 mm Magnetic chuck diameter: approx. 250 mm Dimensions and weight Dimensions: 3,700 x 2,600 x 2,200 mm Weight: 4,900 kg Transport width: 2,500 mm EQUIPMENT Technical documentation Grinding wheel Magnetic chuck Various steady rests Additional accessories

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1123, overall weight: 3,000 kg, travel distance X-axis: 750 mm, travel distance Z-axis: 290 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time, on November 26, 2026! TECHNICAL DETAILS Working area and travel distances Largest working area: 600 x 250 mm Travel distance X-axis: 750 mm Travel distance Z-axis: 290 mm Largest distance table – center of grinding spindle: 500 mm Ground clamping surface: 600 x 250 mm Magnet dimensions: 600 x 230 mm Largest grinding wheel dimension: 300 x 50 x 76.2 mm Feeds and adjustments Table longitudinal feed (X-axis): 1–24 m/min Table transverse feed (Z-axis): 0.02 mm Feed per revolution: 4.0 mm Fine adjustment scale division: 0.005 mm Grinding head height adjustment (Y-axis), handwheel division: 0.002 mm Grinding head height adjustment (Y-axis), adjustment per revolution: 0.2 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Dimensions and weight Dimensions: 3,500 x 2,000 x 1,800 mm Weight: 3,000 kg Gkjdo Ai Sc Dspfx Adkod EQUIPMENT Diaform CNC system ASYST APNC 400 NC control Band filter system Lifting magnet Large quantity of various grinding wheels External reference: Präzitec - Lot 2

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, production capacity: 3,650 unit/h, The system has been completely overhauled! TECHNICAL DETAILS Capacity: approx. 3,650 pieces/hour Gsdpfx Ads Agnwaskjkd Round dough pieces (cut): 40–65 g Long-rolled dough pieces (cut and uncut): 40–65 g Dough piece weight in 3-row operation: 40–85 g Round/smooth dough pieces via pretzel discharge: 40–85 g Processable products Sliced rolls Round and smooth dough pieces Baguette rolls Hotdog buns Bread rolls EQUIPMENT Complete stainless steel design 3-row operation Pretzel discharge

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 3338, grinding length: 600 mm, grinding width: 200 mm, overall weight: 2,500 kg, controller model: Siemens Sinumerik, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Grinding length: max. 600 mm Grinding width: max. 200 mm Table clamping area: 600 x 200 mm Distance from table surface to center of grinding spindle: max. 500 mm Magnet dimensions: 510 x 210 mm Grinding wheel Grinding wheel dimensions: 250 x 25 x 50.8 mm Grinding spindle speed: 800–4,200 min⁻¹ Feeds and adjustments Table longitudinal feed: 1–24 m/min, hydraulic, continuously adjustable Table transverse feed, handwheel, scale division: 0.02 mm Table transverse feed per handwheel revolution: 4.0 mm Fine adjustment, scale division: 0.005 mm Grinding head height adjustment, handwheel, scale division: 0.002 mm Gkodpe Ai Sd Ejfx Adkjd MACHINE DETAILS Control system: Siemens Sinumerik Digital display: Heidenhain, 3 axes Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Dimensions and weight Dimensions: 3,000 x 2,400 x 2,000 mm Weight: 2,500 kg EQUIPMENT Jung PA 30 fixture Lifting magnet Large quantity of various grinding wheels External reference: Präzitec - Lot 3

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new circular bending machine with only 29 operating hours! TECHNICAL DETAILS Working area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheets: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L × W × H): 1,850 × 700 × 1,200 mm Weight: 520 kg EQUIPMENT 3-roller circular bending machine with asymmetrical roller arrangement Sturdy machine frame made of spheroidal cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric closure for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Godpfx Ade Aiuyxskskd Separate mobile control panel with foot switch for left/right operation Emergency stop safety cord Side cover Operating manual

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal tool and cutter grinding machine Machine weight: approx. 3.1 t Travel distances X-axis travel: 1,100 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Spindle and milling head Distance spindle/table: 9–509 mm Swivel range of spindle head: 360° Spindle mount: SK 40 Spindle speed: 30–2,066 rpm Speed stages: 27 Milling head: original Huron adjustable milling head, adjustable in 3 dimensions Horizontal milling: possible Feed and rapid traverse Feed rate: 1.6–820 mm/min Feed stages: 27 Gedpfx Aj Aa Au Sedkekd Rapid traverse X-axis: 2.8 m/min Rapid traverse Y-axis: 2.8 m/min Rapid traverse Z-axis: 1.4 m/min Work table Clamping surface: 1,435 × 460 mm Performance data Total power requirement: 10 hp Dimensions Width: approx. 2.36 m Height: approx. 1.65 m Depth: approx. 1.45 m EQUIPMENT Original Huron adjustable milling head Handwheels for X, Y, and Z axes Feeds for X, Y, and Z axes Safety machine main switch Adjustable work light Coolant system Heidenhain digital display

Condition: ready for operation (used), Year of construction: 2001, operating hours: 368 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: HEIDENHAIN TNC 410, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table dimensions: 950 × 520 mm Table load capacity: max. 455 kg Distance, spindle nose to table (min.): 127 / 227 mm Distance, spindle nose to table (max.): 637 / 737 mm Tool clamping system: DIN 69871-1986 / ISO 7388-1 / ANSI B5.50 Spindle taper: ISO 40 Spindle speed: 60–8,000 rpm Spindle motor power: 9 / 11 kW (depending on the operating mode) Speed programming: 1 rpm per step Rapid traverse rate, X-/Y-/Z-axis: 16 / 24 m/min Feed force, X-/Y-axis: 2 / 2.5 kN Feed force, Z-axis: 7 / 6 kN Gjdpe Agu Spsfx Adkskd Positioning accuracy, X-/Y-axis: 0.003 mm Positioning accuracy, Z-axis: 0.004 mm Repeatability: 0.001 mm Tool magazine capacity: 21 tool positions Tool selection: Bidirectional drum rotation Tool weight incl. holder: max. 6.8 kg Maximum drum load: max. 68 kg Tool length: max. 385 / 305 mm Tool diameter with free neighboring positions: max. 80 mm Tool diameter with occupied neighboring positions: max. 160 mm Tool change time (chip to chip): 8.0 / 7.0 s MACHINE DETAILS Control system: HEIDENHAIN TNC 410 Operating hours Control system switched on: 1,209 h Spindle operating hours: 368 h EQUIPMENT Spindle drive with AC motor

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Bihler Type: RM-35 Machine Number: 7,301 Year of Manufacture: 1975 Machine Type: Bending Press Tooling Tool Diameter: approx. 760 mm MACHINE DETAILS Dimensions Length: 1,300 mm Width: 900 mm Height: 1,800 mm Weight Godpfx Ao Ad Hhqodkskd Machine Weight: 1,000 kg

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Tool diameter: approx. 760 mm MACHINE DETAILS Gsdpfx As Ad Hg Tjdkjkd Manufacturer: Bihler Type: RM-35 Machine number: 7765 Year of manufacture: 1968 Length: 1,300 mm Width: 900 mm Height: 1,800 mm Weight: 1,000 kg (?) EQUIPMENT

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item promptly between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Gkedpfx Ade Ai Scvskjd Travel range Z-axis: 380 mm Distance from table center to column: 190–570 mm Rapid traverse rate: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied secondary positions: 85 mm Max. tool diameter with free secondary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vice shown in the photos is not included. External reference: Schönichen - Lot 23

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, production capacity: 6,000 unit/h, TECHNICAL DETAILS Production capacity: 6,000 pieces/hour Dough weight range: 25–750 g Dough weight range for round and square products: 25–140 g Heading machine Number of rows: 5 / 6 Pre-fermentation unit and shaping station Belt width: 800 mm Topping station Number of topping containers: 2 Belt width: 800 mm Deposit unit Belt width: 800 mm Sheet size: 800 × 600 mm Sheet size: 800 × 1,000 mm EQUIPMENT Spreader belt between the heading machine and the pre-fermentation unit Shaping station for rolls and hot dog buns Godpo Ah Eyfefx Adkokd Punching unit Cutting unit Topping station with two topping containers Deposit unit for baking sheets

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 925674, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Workpiece dimensions: max. 1,000 x 550 x 220 mm Workpiece weight: max. 750 kg Travel range X/Y/Z axis: 350/220/220 mm Travel range U axis: 350 mm Travel range V axis: 220 mm Table dimensions: 680 x 450 mm Distance from floor to table: 1,000 mm Front door dimensions: 820 mm Total dielectric fluid volume: 760 l MACHINE DETAILS Gjdpfxe Ai Shas Adkokd Control system: Agie Charmilles Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 18 A Connected load: 10 kVA Dimensions and weight Machine dimensions: 2,000 x 1,700 x 2,000 mm Machine weight: 2,500 kg EQUIPMENT Workbench with matching accessories

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Gedpfxs Ai Sddo Adkjkd Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 95566, functionality: fully functional, controller model: BIESSE XP 600, working width: 1,287 mm, spindle speed (max.): 24,000 rpm, working height: 170 mm, working length: 5,920 mm, TECHNICAL DETAILS Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C and A axes: available Working areas for pendulum machining: 2 Work table: ATS-HTS-EPS Automatically positionable consoles: 10 units Stop pins per console: 2 units 5-axis milling spindle Spindle power: 9 kW / 11 kW at 60 Hz Speed: max. 24,000 rpm Tool interface: HSK-F63 Cooling: Liquid cooling Drilling head BH 26 Gjdpfx Ade Ah Rhqjkjkd Vertical drilling spindles: 16 units Horizontal drilling spindles in X-direction: 4 units Nut sawing units: 2 units Tool positions: 21 units Tool changer type: Chain tool changer MACHINE DETAILS UNICLAMP clamping systems: 6 units Software: Windows 10, Biesse Works, NC-HOPS license Motor power: 5.5 kW Conveying capacity: 244 / 286 m³/h Compressed air: 7–7.5 bar Total power: 25.3 kW Machine weight: 4,200 kg EQUIPMENT Automatic console positioning system EPS Pendulum machining with two working areas ATS-HTS-EPS work table Liquid-cooled 5-axis milling spindle Drilling head BH 26 Nut sawing units for X and Y directions Chain tool changer 6 UNICLAMP clamping systems Motorized conveyor belts for chips and machining waste BECKER vacuum pump Numerous vacuum suction cups Numerous HSK-63 tool holders 2 large saw blades in the tool magazine

Condition: used, Year of construction: 1977, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: fully automatic bandsaw machine Machine weight: approx. 1.2 t Cutting Range Cutting diameter: 250 mm Saw blade length: 450 mm Gkodpfxe Aaz Nbe Adkjd Cutting speed: 50 / 70 / 100 / 135 strokes/min Performance Data Total power requirement: 3.8 kW Dimensions Length: 2.6 m Width: 1.8 m Height: 1.1 m EQUIPMENT Fully automatic operation

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, overall weight: 7,000 kg, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! Gjdpfx Ade Aidv Sekokd TECHNICAL DETAILS Working width: 950 mm Workpiece thickness: min. 0.5 mm Workpiece thickness: max. 120 mm Number of stations: 3 Station 1: Sanding belt Station 2: Rotating brush Station 3: Rotating brush MACHINE DETAILS Control: CNC Connected power: 39 kW Dimensions & Weight Dimensions (L x W x H): 3,940 x 1,980 x 2,010 mm Weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA2/002546, functionality: fully functional, travel distance X-axis: 7,033 mm, travel distance Y-axis: 1,940 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 1 Number of controlled axes: 5 Spindle speed: max. 8,000 rpm Main motor power: 11 kW C-axis: Available Tool holder: HSK-F63 Table design: Cantilever table Table length: 5,200 mm Table width: 1,300 mm Working area X-axis: 6,350 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Travel range X-axis: max. 7,033 mm Travel range Y-axis: max. 1,940 mm Travel range Z-axis: max. 475 mm Drilling tool: Available Motor power: 3 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 10 Tool changer positions: 24 MACHINE DETAILS Vacuum pump: Becker VTLF 250 Year of manufacture: 2008 Main motor power: 5.5 kW Capacity: 300 m³/h Connection diameter: 70 mm Oil-free: Yes Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Installed length: 11,000 mm Installed width: 3,900 mm Installed height: 3,000 mm Transport weight: 6,600 kg Transport packages: 1 EQUIPMENT Tools Gkodpo Aidx Hsfx Adked CE marking

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030 515 428, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Main spindle speed: 50–12,000 rpm Spindle mount: BT 40, JIS B 6339 Big+ Tool magazine capacity: 120 tool positions Preparation for tool magazine capacity: 240 tool positions Pallet changer: 2 pallets Pallet storage: 6 pallets Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar Coolant pressure: switchable in 3 stages Coolant pump output: 5.5 kW Coolant flow rate: 17 l/min at 70 bar Coolant pressure: 70 bar External coolant pump: 100 l/min at 1.4 bar Filter capacity: approx. 250 l/min Dimensions of the coolant system (L × W × H): approx. 2,200 × 1,500 × 2,250 mm EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Tool magazine with 120 tool positions, prepared for 240 tool positions Tool changer with 31 tool positions Loading and setup station 2 spiral chip conveyors KNOLL coolant system with scraper conveyor and lift pump Coolant pump KTS25-50 for coolant supply through the spindle External coolant pump Coolant shower Precision NC rotary table instead of the indexing table Direct measuring system and control extension for the B-axis CE marking Tool breakage monitoring Automatic tool length correction Rotating viewing window Gkeds Afhlaopfx Adksd Note: The machine has already been dismantled.

Condition: used, Year of construction: 1970, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis travel: 900 mm Y-axis travel: 250 mm Z-axis travel: 370 mm Work table Table clamping surface: 1,525 × 325 mm Performance data Total power consumption: 9.85 kW Machine weight: approx. 3.1 t Gkodpfx Adj Aa Aynsked Dimensions Space requirement: approx. 2.0 × 2.5 × 1.7 m EQUIPMENT No information on accessories available.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, workpiece weight (max.): 227 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Travel range X-axis: 440 mm Travel range Y-axis: 500 mm Travel range Z-axis: 410 mm Max. workpiece weight: 227 kg Table height: 930 mm MACHINE DETAILS Gksdpfx Adj Afhtqekjd Last overhaul: 2025 Last calibration and maintenance: 09/09/2025 Calibration and measurement protocols: available Operating manual: available on CD Dimensions & Weight Dimensions (L x W x H): 1,030 x 1,160 x 2,320 mm Total weight: 293 kg Input voltage: 220 V Input current type: Alternating current (AC) EQUIPMENT PC-DMIS Pro for Windows Version 4.2 MR4 Release Software, legally transferable Renishaw MH20i measuring head with TP-ES probe system EM1 extension module, length: 70 mm TP20 SF probe module with standard probing force TP20 EF probe module with high probing force Functional HP computer Additional Renishaw Brown & Sharpe TP-ES measuring head, functional Several probe extensions Various probe tips The scope of delivery also includes a TESA Star-i measuring head and a Renishaw MIP measuring head. The TESA Star-i measuring head is defective. The Renishaw MIP measuring head is likely defective. However, the machine itself is equipped with the fully functional and even higher-quality Renishaw MH20i with TP-ES probe system and is therefore immediately ready for use.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Ram stroke: 6–60 mm Ram adjustment: 80 mm Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Table slots: 6 Feed Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² Gkjdpj Adzqaefx Adksd MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11520, year of last overhaul: 2022, overall weight: 3,800 kg, product height (max.): 280 mm, Equipment: documentation/manual, The machine was overhauled in 2022! TECHNICAL DETAILS Number of printing colors: 1 Product diameter: 20–130 mm Product length: 40–280 mm Product height: max. 280 mm MACHINE DETAILS Feeding system: K23 Scrambler with hopper Inspection system: Deco camera inspection system Operating voltage: 230/400 V Frequency: 50 Hz Rated current: 32 A Operating pressure, compressed air: max. 6 bar Compressed air consumption: max. 7 Nm³/h Dimensions & Weight Dimensions (L x W x H): 7,500 x 6,450 x 2,300 mm Total weight: 3,800 kg Gkedpfxo Ahppwo Adkod EQUIPMENT Fully automatic high-speed screen printing machine K9 Single-color screen printing system Automatic product sorting and feeding system K23 Scrambler Hopper Deco camera inspection system for print quality control Suitable for printing cylindrical products such as bottles, tubes, and similar containers Complete maintenance history available up to the time of storage.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! Gkedpfx Ae Ahg T Hedked TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 1.603.012, functionality: fully functional, cutting range round steel at 45°: 360 mm, cutting range round steel at 90°: 360 mm, saw band length: 5,200 mm, saw band width: 34 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Circular sawing capacity at 90°: 360 mm Circular sawing capacity at 45°: 360 mm Saw band length: 5,200 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Saw type: Semi-automatic Orientation: Horizontal Miter saw: Yes Workpiece clamping: Hydraulic MACHINE DETAILS Power: 3.7 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,300 x 1,800 mm Unladen weight: 1,585 kg Transport packages: 1 piece EQUIPMENT Gksdpfe Aidvcsx Adkod Digital display Chip collection tray Documentation CE marking