Used Briquett Bagging Maschine for sale (3,895)

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Ndedpfxsxu E E So Adwsd Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: used, 3 pieces of steel holders PARAT Njdpsxwknqefx Adwodd

Condition: used, - 3-layer blown film line on rotary platform Nsdpfsxq Hcdex Adwjdd - Product-specific modifications and adjustments are possible (subject to charge) - Spare screw, spare cylinder and various spare parts are additionally available for this line Freight terms: ex location Delivery time: by arrangement Payment terms: 100% in advance before machine takeover, strictly net

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Njdpewka S Iefx Adwodd Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Nodpfsxqrvvox Adwjdd Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: used, Year of construction: 1993, pressing force: 160 t, Press brake used Make: BBM Model: AP ME 160-40 year of construction 1993 Pressure capacity 160 to. folding length 4050 mm Table width 190 mm Stroke 250 mm throat 315 mm Equipment CNC control Swivel operation at the front right CNC backgauge (X-axis) CNC electric depth adjustment Manually adjustable stop fingers adjustable table crowning, by crank Rear and side guards 3 front support arms Double foot switch Ndjdpfx Adstufbnewed Accessories: 2 Multi-V-matrices as well as 1 brand. Deer foot stamp

Condition: as good as new (ex-display), functionality: fully functional, The inclined conveyor belt is for sale and has the following dimensions; Of course, a BA is also available. Ndodpfxovadvqo Adwod The conveyor belt is operated via 230 volts and can be changed from 1m/min-15 m/min by means of a frequency converter. L: 1600 mm NB: 200 mm GB: 290 mm FU : SEW

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET502P3-20 - 2200387388, cooling capacity: 105 kW (142.76 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,748 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 17.9 m³/h, pump pressure: 3.42 bar, total width: 1,255 mm, total length: 3,298 mm, total height: 2,119 mm, warranty duration: 3 months, Equipment: type plate available, Process chiller, refrigeration unit, air-cooled chiller Manufacturer: MTA S.p.A. Model: TAEevo Tech 502 P3-20 The TAEevo Tech 502P3-20 is a compact, air-cooled water chiller designed for outdoor installation (ambient temperature range: -20°C to +46°C). Chilled water setpoints adjustable from -10°C to +30°C. Includes crankcase heater, phase monitoring relay, 500-liter buffer tank, integrated P3 circulation pump, and fan speed control. Cooling capacity: 105 kW Chilled water temperature, outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 17.9 Available pump pressure (bar): 3.42 Ambient temperature: 32°C Refrigerant: R 410A Electrical specifications: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power consumption (kW): 55.09 Max current (A): 93.06 Starting current (A): 191.65 Protection rating: IP54 Dimensions: Length (mm): 3298, Width (mm): 1255, Height (mm): 2119 Nedpfexxhwxsx Adwodd Weight (kg): 1748 Connection: Rp 2 1/2" Serial no.: 2200387388 Year of manufacture: 2022 Condition: Visual 2, technically sound Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Due to previous use, used machines may have cosmetic imperfections. (Technical specifications subject to change and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Ndodpfouladkox Adwjd

Condition: good (used), Completely overhauled by us Glass grinding machine with 9 spindles for grinding and polishing • Year of manufacture: 2014 • Very good condition • Glass thickness: 3 – 25 mm • Minimum glass size: 80 x 80 mm Njdpeu Sm H Hsfx Adwodd • Machine length: 6470 mm • Machine height: 2610 mm • Machine depth: 1110 mm • Weight: approx. 2800 kg • Price on request

Condition: excellent (used), Year of construction: 2015, - Travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 530 with handwheel HR 410 - NC rotary table for multi-sided machining 1600 mm x 1250 mm - 1-axis NC universal drilling and milling head, for simultaneous and positioning positioning operation (A-axis, 45°-axis) - Motor spindle 7,000 rpm max. SK 50, 530 Nm spindle torque - Tool changing system SK 50 / 40 places for 400 mm long tools Ndsdpsxmr Uwsfx Adwed tools - Chip screws in X-axis, optimum chip transport - Chip conveyor (hinged belt conveyor) for transverse conveying, Fabr. Knoll, front ejection - Coolant supply 950 l, made by Knoll - Outside/inside air at the spindle - IKZ 60 bar for deep hole machining - Operating mode 4 - Full enclosure with safety glass panes with sliding doors, optimized for crane loading - Split sliding doors on the front side - Split sliding doors on the operator side - RMP 60 radio measuring probe - incl. washing gun - Short delivery time by arrangement, subject to prior sale - Used machine - Z-axis KGT renewed in September 2023 incl. bearings - Optional fixators and tie rods - optional commissioning/installation - optional transportation

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg Nsdpfx Asxrb Rfodwsdd

Condition: used, Technical details: Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m BRUSH MACHINE * Ndjdpfx Adowiu Smowjd

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET121P3-20 - 2200396021, cooling capacity: 35 kW (47.59 HP), type of input current: three-phase, type of cooling: water, overall weight: 661 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 5.96 m³/h, pump pressure: 2.67 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, Equipment: type plate available, Process Air Cooler / Chiller / Air-cooled Water Chiller Unit Manufacturer: MTA S.p.A. Model: TAEevo Tech 121 P3-20 TAEevo Tech 121 P3-20 units are air-cooled compact water chillers suitable for outdoor installation (ambient temperature range: -20°C to +46°C). Including crankcase heater, phase monitoring, 255 l buffer tank, integrated P3 circulation pump, and winter control (condenser pressure control down to -20°C). Adjustable chilled water outlet temperatures from -10°C to +30°C. Cooling capacity: 35 kW Chilled water outlet/inlet temperatures (°C): 7 / 12 Flow rate: 5.96 m³/h Available pump head: 2.67 bar Ambient temperature: 32°C Refrigerant: R 410A Electrical data: Voltage: 400 V Frequency: 50 Hz Phases: 3 Max. power consumption: 19 kW Max. current: 33 A Starting current (circuit): 165 A Protection class: IP54 Njdpfx Adexxhl Aowodd Dimensions: Length: 1862 mm, Width: 761 mm, Height: 1437 mm Weight: 661 kg Connection: Rp 1 1/2" Serial No.: 2200396021 Year of manufacture: 2023 Condition: Visual 2, Technically OK USED Price: on request in euros (plus VAT, ex works Nettetal) – 3 months warranty Used machines may show signs of cosmetic wear due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 320 mm turning diameter over slide rest: 198 mm turning length: 650 mm total power requirement: 2,2 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 1700x1000x1700 mm : 3 - Achs Heidenhain ND 780 : Ø 40 mm Njdpfx Adowt Auwjwsdd : 96 - 2500 1/min : A 2 - 5 : 0,007 - 0,63 mm/1 : metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 : MK 3 3-jaw chuck: 160 mm Accerories Technical equipment Typ B

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: Ndjdpfx Asxrknmsdwed - FANUC CRX10iA - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request.

Condition: used, Year of construction: 1991, Plastic material Maxir Condition: Operational Nsdoxuu T Espfx Adwedd Type: VKc-50 Year of manufacture: 1991

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Nedexq Hgcjpfx Adwedd Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: used, Year of construction: 1999, Technical details: x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° mm control: Siemens 840 D number of spindle speeds: max. 15 000 U/min tool clamping: System nach DIN 69893 tool taper: HSK-A63 tool changer magazine: chain magazine: 12 places Stück Ndjdpfou Idl Sox Adwjd traversing speed: x/y/z Axis: 40 total power requirement: 195 kW weight of the machine ca.: 13,0 t Traveling Column Milling Machine - the tool changing unit consist of 3 -NC axis and 1 NC- rotary table axis - ATC ( with magazine) - rotary table Type SKH-NC 4/029, diameter=460mm , table surface plate Ø 500 x20mm, revolution per minute max. 22 rpm - control panel SIEMENS - Spindel-Typ: DRF-WE-255-N-W-15-30, 15000 U/min., Spindelleistung = 30 kW - chip conveyor Make Knoll type 400K-3/280, ejection height 1150mm - cooling system for spindle make SCHIMBKE Type DK 80V, 3,36 kW i.D. *

Condition: used, Year of construction: 2004, Technical details: Ndodsu Nc Rispfx Adwod x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² compressed air: 6,3 bar Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1977, Technical details: Njdpfsw Rv Tajx Adwsdd honing diameter: 125 mm stroke: 500 mm throat: - mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. *

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Ndsdsu Ibuwspfx Adwsd Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) Ndjdpeu Nfttofx Adwod *

Year of construction: 1984, condition: used, Technical details: material Ø max: 120 mm suitable for: Laborarbeiten feed:: Stufe 1: 0,05 Doppelhub mm Ndodpju Ng Sdofx Adwsd feed:: Stufe 2: 0,1 Doppelhub mm air pressure - required: 5 - 6 bar Number of working hours: 2649 h connected load: 5 kVA machine length: 1200 mm machine width: 800 mm machine height: 1900 mm machine weight: ca. 850 kg Laboratory Test Grinding Machine - precision grinding machine for laboratory work (e.g., steel and ice samples for spectral analysis) - automatic grinding machine with electronic control (in electric cabinet) - automatic feeding of the grinding spindle - workpiece holder = electro-magnetic - 380V; 50Hz; 3 phases - pot grinding wheel Ø 200x 100mm and drill hole Ø 51mm - coolant device available *

Condition: used, Technical details: weight of the machine ca.: 4,0 t Ndedpfxsu N D S Uo Adwsd machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *