Used Brush Deburring Machine for sale (65,315)

Condition: good (used), Year of construction: 2000, functionality: fully functional, working width: 1,300 mm, passage height: 200 mm, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, the machine is in good condition. Hodpfxoy Tm Alj Airsw

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) Hsdpfx Aijxw Ih Ujrew - Rotary brush unit with 8 brushes (self-calibrating)

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Hodpfx Aiozy Uvkorsw Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Year of construction: 2017, condition: used, functionality: limited functionality, machine/vehicle number: 2017038, Technical characteristics: ⚙️ Core Specifications Attribute Value Technology: High-pressure water-jet deburring Max Pressure: Up to 1000 bar Hsdjxx Nq Tjpfx Airow Materials Processed: Cast iron, aluminum, steel Machine Type: Rotary table or tunnel with step feed Automation: Robotic arm with programmable sequence: Staubli TX60 newly retrofitted!!! Nozzle Material: Long-life alloy Construction: AISI 304 stainless steel Workpiece Handling: Mechanical clamping on custom pallets Water Treatment: Integrated deoiling and filtration system 🧰 Features & Capabilities Deburring & Flushing: Removes loose burrs and embedded swarf, even in intersecting holes. Flexible Programming: Supports various part geometries and production volumes. Robotic Integration: Nozzles mounted on anthropomorphic robots for precision targeting. Modular Design: Configurable for different layouts and productivity goals. Eco-Friendly Operation: Water-based cleaning with extended bath life via filtration. Loading/unloading manual table: with the option of 2 work stations running in parallel, equipped with Poka Yoke devices. Machine status: WORKING – High pressure pump needs to be retrofitted to achieve 1000 Bar (currently 350 bar).

Condition: excellent (used), Year of construction: 2024, operating hours: 809 h, Workpiece width – max. 200 mm Workpiece height – max. 100 mm Workpiece height – min. 0.6 (L+W > 5xH) mm Workpiece dimensions – min. 20x20 mm Working height 980 mm Conveyor belt speed 0.3-5 m/min Total power consumption 8 kW Hjdpo Agn Snjfx Airsw Machine weight approx. 1,090 kg Space requirement approx. 1900x700x2150 mm

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. Hsdownhxdopfx Airjw - CE marking present: Yes - Serial number: 150610 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 - └ Unit 2: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2024, operating hours: 300 h, Workpiece width – max. 1200 mm Workpiece height – max. 170 mm Workpiece height – min. 0.6 (L+W > 5xH) mm Hsdpfx As Agn R Ajirjw Workpiece dimensions – min. 50x50 mm Working height 900 mm Conveyor belt speed 0.3-10 m/min Total power consumption 16 kW Machine weight approx. 2,650 kg Space requirement approx. 2100x2200x2100 mm

Condition: excellent (used), functionality: fully functional, working width 620 mm two brush rollers Hedpfxoz R S Eke Airjw adjustable roller height 400 V power supply safety switch year of manufacture: 2006

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 1600mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 2,600 mm, overall weight: 8 kg, input voltage: 380 V, table length: 4,300 mm, table width: 1,600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,600 mm, workpiece length (max.): 2,000 mm, table height: 1,000 mm, space requirement width: 300 mm, input current: 70 A, Core Advantages ✅ 1600mm ultra-wide processing width for large-size workpiece batch production ✅ 3-in-1 multifunction: deburring, chamfering and wire drawing, one machine for multiple uses ✅ Full-automatic one-pass processing, high efficiency and stable precision ✅ Wide adaptability for various metal materials and industrial scenarios ✅ Adjustable parameters to support customized finishing effects ✅ Heavy-duty structure, low failure rate and excellent cost performance Core Performance & Functional Features 1. 1600mm Ultra-Wide Working Width for High-Volume Production Featuring a full 1600mm effective processing width, this machine supports one-time integral finishing for large metal sheets and wide workpieces that traditional narrow-width machines cannot handle. It accommodates full-width continuous feeding as well as batch processing of small and medium-sized parts, delivering excellent production flexibility and strong compatibility. The optimized conveyor system ensures stable, synchronous workpiece transmission across the entire width, avoiding position deviation, incomplete finishing and inconsistent precision. It minimizes repeated clamping and positioning procedures, shortens production cycles, and is perfectly suited for mass processing of large-format sheet metal components. 2. Full-Automatic Precision Deburring (Zero Burr Residue) Equipped with high-density flexible abrasive brush groups and multi-directional grinding assemblies, the machine provides dead-angle-free all-round deburring for upper surfaces, lower surfaces and cutting edges. It thoroughly removes hard burrs, flash, cutting slag and oxidation layers produced in metal cutting and stamping processes. Adopting intelligent adjustable speed and constant-pressure control, the system adapts to different metal materials and varying burr thicknesses for targeted finishing. It removes sharp edges completely without damaging workpiece base materials or original dimensional tolerance, delivering smooth, clean surfaces that meet strict industrial assembly and precision manufacturing standards. Hsdpsz Ii H Defx Airew 3. Adjustable Precision Chamfering for Standardized Edge Finishing The equipment supports customizable edge chamfering and rounding treatment with freely adjustable angle and size. It achieves uniform, smooth chamfering on straight, curved and irregular workpiece edges, solving the inconsistency, low efficiency and poor precision of manual chamfering. The high-precision fixed-angle machining structure ensures identical chamfer accuracy for every workpiece. Optimized edge finishing removes sharp edges effectively, improving workpiece safety, assembly fit and surface quality. It is widely applicable for mechanical parts, hardware components, electrical enclosures, automotive sheet metal and general metal fabrication products. 4. Uniform Wire Drawing Finishing for Premium Metal Texture Built with a professional wire drawing module, the machine produces delicate, consistent and aesthetic linear textures on stainless steel, carbon steel, aluminum alloy, copper and other metal surfaces. It effectively removes tool marks, grinding scratches, oxidation traces and uneven surface flaws. Wire drawing depth and surface roughness are precisely adjustable to achieve fine straight wire drawing, matte wire drawing and customized surface effects.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, total width: 1,500 mm, overall weight: 5,200 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 5 A, Equipment: documentation/manual, The ERNST Neptun EBB 1500 is a deburring machine for sheet metal processing, used to clean and round the edges of parts cut, punched, or burned with a laser. This machine enables the alternating processing of various materials, such as steel, aluminum, galvanized sheets, or materials coated with protective film, thanks to its flexible deburring roller and brush set. Main features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made of different materials without the need for constant replacement of abrasive elements. • Functionality: Hedpfxez Spmts Airow Uses a flexible roller for deburring and a set of brushes (steel or lamellar) for dulling or rounding edges. • Precision: Allows for achieving identical and uniform radii on the edges. • Ideal solution for: Companies that process various materials where edge finishing is required after cutting. Important information: The machine has different options. It can hold parts pneumatically or magnetically. Modules: E – Module with a deburring roller B – Stainless steel brush module – for dulling edges and removing oxides up to 6 mm B – Scotch/Vlies brush module – for rounding edges 0.1 – 0.4 mm and applying texture to the material surface. With this type of machine, material processing is done in a wet environment, so there is no need to retool or clean the machine, and it can work with various types of materials, such as aluminum, stainless steel, structural steel, etc., in continuous operation. The entire process takes place in a closed water system with the addition of a special emulsion, which ensures that neither the machine components nor the processed parts rust. From time to time, water needs to be replenished as it evaporates in the parts drying system and during filtration in a special filter within the machine.

Condition: used, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Year of manufacture: 2005 Empty weight: 7.000 kg Hsdjxwnbuopfx Airew Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RYW 800 EU – Deburring & Edge Rounding Machine The ADV 508 RYW 800 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide grinding belt, rotating brushes and disc brushes allows efficient processing of both outside contours, inside contours and holes. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 800 mm working width Deburring, edge rounding and surface finishing Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional processing 7 disc brushes for edge rounding of contours and holes Suitable for steel, stainless steel and aluminium Vacuum and magnetic workpiece holding Servo-controlled height adjustment Siemens / Delta PLC control Touchscreen HMI Technical Specifications Model: ADV 508 RYW 800 EU Working width: 800 mm Material thickness: 0.5–100 mm Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 2,000 × 820 mm Grinding belt motor: 15 kW Grinding belt speed: 0–15 m/s Rotating brushes: 4 × Ø300 × 300 × 40 mm Hodszwqwfopfx Airjw Rotating brush motors: 2 × 2.2 kW Disc brushes: 7 pcs. Disc brush motors: 7 × 1.1 kW Disc brush speed: 0–24 r/s Disc brush oscillation: 0–30 mm adjustable Vacuum pump: 15 kW Height adjustment: Servo-controlled Control: Siemens / Delta PLC Operating panel: Touchscreen HMI Power supply: 3~ 380 V / 50 Hz Complete Finishing in One Pass The wide grinding belt removes heavier burrs and prepares the surface. The rotating and disc brushes subsequently process the workpiece from multiple directions, providing consistent edge rounding on external contours, internal contours and holes. This makes the RYW configuration particularly suitable for companies processing a wide variety of complex sheet metal components where consistent and reproducible finishing is required. Service & Availability The ADV 508 RYW 800 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,100 mm, sheet thickness (max.): 100 mm, The 32 RB series offers the solution for manufacturers delivering premium-quality products. This top quality is achieved by a multi-rotating brush unit with four abrasive lamella brushes, which evenly deburr and perfectly round the edges of the metal. Multi-directional rotary brush deburring machine (RB) for consistent deburring and finishing of flat sheet metal parts. All-around processing in a single pass, providing the part's surface with a non-directional finish. Equipped with one (or more) abrasive belt units (W) for pre-deburring and final finishing. Hodpfsxw Ikcjx Airew - Abrasive belt unit - Rotary brush unit (self-calibrating) - Abrasive belt unit

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. Hjdpfowftuxox Airew --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Hsdpfx Aiowbh Dyorew Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes

Condition: good (used), Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush Hsdpfx Asrw Daasirjw -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Hsdpfszwlnrsx Airow Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Including spare parts, consumables Full line has less than 2000 working hours Very good condition Available for inspection

Condition: used, Year of construction: 2020, Timesavers Series 12 | 225 mm Deburring Machine | Year of Manufacture 2020 | 2 Disc Units We are selling a dry-running Timesavers Series 12 for processing small sheet metal parts. The machine was manufactured in 2020 and is equipped with two disc units and a feed conveyor. Hedpfxoz D U U Ss Airsw It is suitable for removing burrs from laser-, punched-, and waterjet-cut parts. According to the machine documentation, two flap discs with a 350 mm diameter are included in the scope of delivery. Machine Data Year of Manufacture: 2020 Working Width: 225 mm Design: Dry Operation Units: 2 Disc Units Serial Number: G2561-01 The machine can be inspected by appointment. We will gladly provide further photos and information on the actual operating condition to interested parties. Price: €12,900 net, ex works Leopoldshöhe. Loading and transport are not included. If you are interested, please send us your contact details.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 300 CN – Deburring & Edge Rounding Machine The ADV 508 RW 300 CN is a compact automatic machine for deburring, light edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide belt grinding unit and rotating brush provides fast burr removal and consistent edge finishing in a single pass. The machine is particularly suitable for parts with larger outside contours. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features Deburring, light edge rounding and surface finishing Wide belt grinding unit for efficient burr removal Rotating brush for multidirectional edge processing Particularly effective on outside contours Suitable for steel, stainless steel and aluminium Servo-controlled workpiece height adjustment Variable feed speed Compact 300 mm working width Delta PLC control 7" touchscreen Technical Specifications Model: ADV 508 RW 300 CN Working width: 300 mm Material thickness: 0.5–80 mm Minimum workpiece: 50 × 50 mm with vacuum table / 30 × 30 mm with magnetic table Feed speed: 0.5–7 m/min Grinding unit: 1 × wide grinding belt Grinding belt: 1,650 × 320 mm Grinding belt motor: 5.5 kW Brush unit: 1 × rotating brush Rotating brush: Ø300 × 300 × 40 mm Brush motor: 2.2 kW Vacuum pump: 5.5 kW Hodpfx Aozwqvujirsw Height adjustment: Servo-controlled Control: Delta PLC Operating panel: 7" touchscreen Power supply: 3×380 V / 50 Hz Efficient Deburring & Edge Rounding The wide belt removes burrs and provides an even surface finish. The following rotating brush processes the workpiece from multiple directions for light and consistent edge rounding. This RW configuration is especially suitable for flat sheet metal parts with larger outside contours and limited complex internal contours, making it an efficient solution for repetitive production. Typical applications include machine construction, steel fabrication, enclosure manufacturing and general sheet metal processing. Service & Availability The ADV 508 RW 300 CN is expected to arrive in stock in September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides installation, technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 630 EU – Deburring & Edge Rounding Machine The ADV 508 RW 630 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide belt grinding unit and rotating brushes provides efficient burr removal and consistent edge rounding in a single process. Suitable for steel, stainless steel and aluminium. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 630 mm working width Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional edge rounding Vacuum and magnetic worktable Suitable for steel, stainless steel and aluminium Variable feed speed Siemens / Delta PLC control Large 21" touchscreen Technical Specifications Model: ADV 508 RW 630 EU Working width: 630 mm Material thickness: 0.5–100 mm Hsdpfszwqv Uex Airsw Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 1,900 × 650 mm Grinding belt motor: 11 kW Rotating brushes: 4 × Ø250 × 300 × 40 mm Brush motors: 2 × 2.2 kW Disc brushes: 5 pcs. Disc brush motors: 5 × 1.1 kW Vacuum pump: 7.5 kW Conveyor drive: 1.5 kW Worktable: Vacuum + magnetic Control: Siemens / Delta PLC Operating panel: 21" touchscreen Power supply: 3~ 380 V / 50 Hz Efficient Deburring & Edge Rounding The wide grinding belt efficiently removes burrs and prepares the surface. The rotating brush system then processes the workpiece from multiple directions, creating consistent edge rounding on outside contours. The combined vacuum and magnetic table provides reliable workpiece holding for both magnetic and non-magnetic materials. Service & Availability The ADV 508 RW 630 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 1000 EU – Deburring & Edge Rounding Machine The ADV 508 RW 1000 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. With a 1,000 mm working width, wide belt grinding unit and 6 rotating brushes, the machine provides consistent processing of outside contours and reproducible results on steel, stainless steel and aluminium. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 1,000 mm working width Wide belt grinding unit for efficient burr removal 6 rotating brushes for multidirectional edge rounding Vacuum and magnetic worktable Suitable for steel, stainless steel and aluminium Frequency-controlled drives Siemens / Delta PLC control Large 21" touchscreen High-quality European industrial components CE certified Technical Specifications Model: ADV 508 RW 1000 EU Working width: 1,000 mm Material thickness: 0.5–100 mm Grinding system: Wide belt grinding unit Rotating brushes: 6 pcs. Worktable: Vacuum + magnetic Hjdpfx Aiozwqwrjrew Control: Siemens / Delta PLC Operating panel: 21" touchscreen Drives: Frequency controlled Power supply: 400 V / 50 Hz Certification: CE Efficient Deburring & Edge Rounding The wide grinding belt efficiently removes burrs and prepares the surface. The six rotating brushes subsequently process the workpiece from multiple directions for consistent edge rounding. The combined vacuum and magnetic table provides reliable workpiece holding for both magnetic and non-magnetic materials. Service & Availability The ADV 508 RW 1000 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Hsdpfov Dfp Hjx Airjw Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1050-WMDMD The Series 22-1050-WMDMD, with a working width of 1050 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, water jet-cut, or plasma-cut parts, thanks to its 3 stations. Hodpoznlxrofx Airjw The belt grinding station allows for the removal of burrs and protruding edges. Subsequently, the edge burrs are removed and the edges are slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for belts and brushes, the machine can be reconfigured in just a few steps. The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.

Condition: new, Year of construction: 2026, functionality: fully functional, # ADV M300 – Manual Deburring & Edge Rounding Machine The ADV M300 is a compact and flexible machine for deburring, edge rounding, grinding and surface finishing of small sheet metal parts. Thanks to the large worktable, integrated vacuum clamping and ergonomic 360° swivelling arm, the machine is particularly suitable for small parts and varying production batches. The dual-function working head can be rotated 180°, allowing the operator to quickly switch between grinding and brushing. ## Main Features * Deburring, edge rounding, grinding and surface finishing * Suitable for steel, stainless steel, aluminium and other sheet metals * 360° swivelling mechanical arm * 180° rotating grinding/brush head * Integrated vacuum clamping for small parts * Pneumatically balanced grinding head Hodpfxszwqu De Airjw * Integrated dust extraction * Quick and easy tool changes * Compact design and simple operation ## Technical Specifications Model: ADV M300 Worktable: 1,200 × 750 mm Vacuum working area: 300 × 300 mm Grinding motor: 1.1 kW Mechanical arm: 1,200 mm / 360° Working range: 0.5–260 mm Disc brush: Ø150 / Ø165 mm Vacuum power: 3 kW Total motor power: 4.1 kW Dimensions: approx. 1,300 × 900 × 1,500 mm Machine weight: approx. 400 kg ## Flexible Finishing One side of the working head can be equipped with an abrasive tool for grinding and removing heavier burrs. The other side can be fitted with a brush for deburring, edge rounding and surface finishing. Simply rotate the head 180° to change between operations. The integrated 300 × 300 mm vacuum area securely holds smaller workpieces during processing. ## Service & Availability Besten Machines provides service, technical support, spare parts and consumables from our locations in the Netherlands and Germany. Contact us for current availability, a quotation or a demonstration with your own workpieces.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06 08 20, compressed air connection: 6 bar, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, We are offering this used WANDRES CF 05/2750 brush machine, manufactured in 2006. Type: CF 05/2750 Year of manufacture: 2006 Machine no.: 06 08 20 Voltage: 400 V Hodpfx Aszfprdoirjw Frequency: 50 Hz Power: 3.5 kW Compressed air connection: 3/4" Pressure: 6 bar Residual oil content: ≤ 1.5 mg/m³ Filter fineness: ≤ 40 µm The machine is sold including 2 new spare belts, with a value of approximately €1,000. If you have any questions or require further information, please feel free to send us a message or call us. The machine is disassembled and ready for loading.