Used Cable Slot for sale (5,968)

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping Lsdpshtn Sfefx Akfsrk -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm -Weight: 1548 kg

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit Lsdpfxex R Sv So Akfsrk -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Lsdpfx Asfn Tu Tjkfsrk Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Lredpfx Aefn Tvhjkfjk Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Lrsdpfxsfn Tvke Akfsk Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color [...]

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Ledpedf Ufpsfx Akferk Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: used, mileage: 8,65,000 km, power: 368 kW (500.34 HP), first registration: 04/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Manufacturer Scania Model R500 8x2 HNA Cable Tipper CR19 Highline Euro 5 Year 2012 Condition Good Serial Number YS2R8X20002075626 Ref. nr. 1587980 Reg. date: Engine: V8 Hk: 500 Km: 865000 Gearbox: Manual GRS905 Eurotype: 5 Diesel tank: 1 Tank liter: 350 liters. Cabin heater: ? Air conditioning: ? Number of beds: 2 Cabin type: CR19 Highline Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 385/65 - 315/80 - 315/80 Cover% left 50 - 30 - 30 - 50% Front suspension: Springs Suspension rear: Air Lrjdpfxoxfn D Se Akfsk Wheelbase: 4700 mm. Toolbox: ? Hydraulic system: ? Total weight: 32000 kg. Net weight: 12050 kg. Load capacity 19950 kg. 3 way: ?

Condition: used, mileage: 24,424 km, power: 220 kW (299.12 HP), axle configuration: 4x4, color: orange, driver cabin: day cab, gearing type: semi-automatic, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, For enquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Mercedes-Benz Unimog U530 4x4 skip loader Lsdpfx Asyuadqskfork Removable body, superstructure: jotha CombiCon 7018 UL, lifting/ payload: 7,000 kg, front axle differential lock, Euro 6 axle bridge variant, combination cylinder 12/16, axle installation variant Euro 6, reinforced steering components on axle side, synthetic oil (HA), axle ratio i = 6.377, trailer brake, dual-circuit, Haldex disc air brake, wheelbase 3,900 mm, VarioPilot (left/right changeable steering), side protection device, central mounting brackets, rear mounting brackets, front mounting plate DIN76060, type B, size 3, air conditioning, air-suspended driver's seat with seat heating, air-suspended passenger seat, additional left-hand steering column switch, universal mount for control unit, main battery switch at battery box, ABS trailer socket 24V, 7-pin/5-pin, reversing alarm, 32-pin equipment socket, 12V constant power outlets (C3), 12V and 24V center console, 24V/25A on-board socket in cab with C3 signal, rear view camera, generator 28V/150A, monitor for camera system, external sun visor (transparent), immobiliser with transponder, driver’s cab strength per ECE-R-29/03, EasyDrive (hydrostatic drive) (SN), Automatic Shift (EAS), clutch flange Ø150mm (instead of 120mm), gearbox oil filter, increased continuous power hydrostatic drive, hydraulic transmission oil cooler, oil/air, 6-stage tipping cylinder, loose, hydraulic rear connector 4-way, cell 1+2, rear pressure line, second hydraulic circuit, separate rear return line, hydraulics for tipping mechanism, single-acting trailer tipping connection, rear, LS hydraulics, 4-cell, separate continuous use, snow plough relief, implement carrier series, compression level (6) 2, compression level (7-8) 12, chassis LL, digital tachograph 2nd generation, ADR, tachograph manufacturer VDO, pre-installation for warning light for telescopic cylinder, radio with USB port and Bluetooth, pre-installation for toll detection, pre-installation for trunked radio (12V), pre-installation for Truck Data Center 6 (FB Card), 25L AdBlue tank, entry lights, LED flashers yellow left/right with tripods, additional LED high beam on roof bar, cab rear work light (LED, top), additional adjustable LED headlights A-pillar, engine OM936, R6, 7.7 L, 220 kW (299 hp), 1200 Nm, engine version Euro VI E, High Performance Engine Brake, quick radiator cleaning system Clean-Fix, engine PTO incl. front PTO, PTO speed limitation, EATU SCS ON-HIGHWAY EURO VIE, rear cross member for lowered trailer hitch, CTT trailer hitch, 14.00x22.5 drop center rims, red/white retroreflective warning stripes, warning triangle and warning light, weight variant 16.5 t (7.5/9.0), adjustable AHK support bracket, Scharmüller trailer hitch, Rockinger hitch, 48mm pin, Unimog implement carrier, model generation 1, instruments/labels/manuals in German, additional hydraulic control, auxiliary roof lights front and rear, tyre tread: 1st axle 16-18mm, 2nd axle 18mm. Upon request, we will be happy to provide a leasing or finance offer. Mr. Seidel (Tel. ...) will gladly assist you. Further information can be found on our homepage: ... Errors, changes, and prior sale reserved!!! ESP Cab type: Local transport ...

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Lredpfxjywzius Akfsk

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly. Lrjdpfxsynv E Rj Akfjk

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system Lrjderg Ebcopfx Akfsk

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Ledpfxeythcrs Akfjrk Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, Year of construction: 1954, Technical details: max. ram stroke: 220 mm workpiece diameter - max.: 400-450 mm total power requirement: 1,5 kW work table:: 650x250 mm ram adjustment: 100 Manuell mm no. of ram strokes: 45/78/125 table adjustment: 400 längs mm table adjustment: 150-170 quer mm Lodpov Ty R Djfx Akfork table adjustment: ca. 360 vertikal mm tool - head swivelling: +/- 10 Grad total power requirement: 1,5 kW weight of the machine ca.: 0,9 t dimension machine xH: 1,2 x 0,9 x 1,8 m

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Lrodpfx Akev Uvvfefsk Be sure to check my other offers from stock!

Condition: used, Year of construction: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SMSchlitztiefe / Slot depth 220mm Hub 30mm Eckenausstoßtiefe / corner ejection depth 220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Lrjdpsi Dx Nnsfx Akfjk Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, Schlitzmaschine / Slot machine Krause-Y-32-UM-2-69Schlitztiefe / slot depth max. 32cm Normal Schlitzbreite / Normal slot width 3mm Hub des Druckstückes / stroke of the pressure piece ca. 30mm Stanzhübe / punch strokes per minute ca. 84 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Lrsdpfeiiduajx Akfjk Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Cable protection ring Lsdpfx Aksb A Svwsfjrk -Type: KSR-910 Light Grey -Cable protection rings per package: 25 -Packages: 15 pieces -Price: per package -Weight: 3.6 kg

Condition: used, mileage: 7,37,954 km, power: 331 kW (450.03 HP), first registration: 11/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,310 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, trailer coupling, = Further Options and Accessories = - Remote-controlled central locking - Lift axle - Tow jaw coupling - PTO (Power Take-Off) - Radio - Sun visor - Spotlights = Notes = NCH container system: Type: 2525-5-130 25,000 kg 645 cm Front: leaf spring suspension – Rear: air suspension = Further Information = Lodjv Niuqopfx Akfjrk General Information Colour: Violet Model number: AROCS 3345 / NCH 25T CONTAINER-S Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65R22.5; Steered; Tyre tread depth left: 50%; Tyre tread depth right: 50%; Suspension: Leaf spring Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Tyre tread depth inner left: 75%; Tyre tread depth outer left: 75%; Tyre tread depth inner right: 75%; Tyre tread depth outer right: 75%; Suspension: Air suspension Rear axle 2: Tyre size: 385/65R22.5; Steered; Tyre tread depth left: 60%; Tyre tread depth right: 60%; Suspension: Air suspension Weights Kerb weight: 12,820 kg Payload: 18,680 kg Gross vehicle weight (GVW): 31,500 kg = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) We speak Russian as well. We strive to provide correct information; however, no rights can be derived from the texts provided.

Condition: new, functionality: fully functional, This original KUKA adapter cable is designed to convert connections from KRC4 controllers to be compatible with KRC2 controllers. It ensures reliable signal transmission and easy integration between different KUKA control generations. Specifications: Compatibility: KRC4 → KRC2 Controllers Function: Controller connection conversion (adapter) Lodpfxjxc I S Dj Akfork Durable and long-lasting design Supplied with protective carrying case

Condition: used, axle configuration: 1 axle, Year of construction: 1977, VAT/margin: VAT qualifying Lrodpfxjytdymo Akfsk

Condition: excellent (used), overall weight: 6,000 kg, total height: 400 mm, total length: 4,510 mm, total width: 1,815 mm, plate height: 400 mm, plate width: 1,815 mm, Floorplate Length: 4510mm Floorplate Width: 1815mm Height: 400mm Ledjyg Icrjpfx Akferk No. Of T-slots: 6 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 4510mm Width: 1815mm Height: 400mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, overall weight: 6,000 kg, total height: 310 mm, total length: 3,985 mm, total width: 2,010 mm, Floorplate Length: 3985mm Floorplate Width: 2010mm Height: 310mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 2 Length: 3985mm Width: 2010mm Height: 310mm Lsdpoyg Hx Eofx Akferk Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, total height: 350 mm, total length: 5,100 mm, total width: 1,500 mm, T slotted bed plate STOLLE - Cast iron Floorplate Length: 5100mm Floorplate Width: 1500mm Height: 350mm No. Of T-slots: 5 Lrjdpfx Akoxdwwfefok Distance from T to T-slot / Jump:300mm T -slot size: 28mm Weight a plate approx.: 5800kg Number of matching pieces: 1 Length: 5100mm Width: 1500mm Height: 350mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Gripper function: tilt forwards-backwards 0–90° Gripper function: rotate left-right +90 / –90° Ljdpfsyf Dqijx Akfjrk MACHINE DETAILS Battery voltage: 12 V Battery capacity: 70 Ah EQUIPMENT Cable drum gripper SG 600 Du-Hy/So Note: The machine is sold without charging plug, battery, and charger.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, High-lift truck with cable reel gripper SG 600 Du-Hy/So! TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Tilting forward-backward: 0° to 90° Rotating left-right: +90° to -90° MACHINE DETAILS Battery: 12 V, 70 Ah Lsdsyf A Nqepfx Akfsrk EQUIPMENT Gripper function Note: The truck is sold without a charger.