Used Capacitor for sale (46)

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components Dodsguvtdepfx Agfjur - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine Djdpoguvtasfx Agfour The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: new, Year of construction: 2026, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, Technical Data: X, Y axis travel range: from 600 x 900 mm up to 2100 x 2100 mm Z axis range: up to 500 mm Control system: Multi-axis real-time interpolator with active trajectory prediction, LAN communication, EtherCat, 2 ms sampling time, optional: RTCP tool tip tracking, correction map Drive system: Servo drives with EtherCat protocol, X, Y axes with precision-ground helical racks (accuracy class 6), Z axis with precision-ground ball screw (accuracy class 5) Linear guides: Trapezoidal rails Traverse speed: Up to 90 m/min Software resolution: up to 0.0001 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave with gantry angle correction Automatic head: SK type Material: Steel, Stainless Steel, Aluminum, Brass Welding range: Ø 3 - M 8 Dedov T Uy Topfx Agfeur Stud welding range: M 3 x 6 - M 8 x 40, 50 to 100 Volt, fully adjustable, accuracy ± 1 Volt Ball bearing Min. tolerance / 490 Ws at 99 V Stroke: Pneumatic 50 mm Weight: 1.5 kg (without cable) Option: CNC capacitor discharge stud welding MULTI-HEAD

Condition: new, Fanuc A06B-6083-H218 Capacitor Module Version: A SN:V03202439, used, normal signs of use, 100% functional, scope of delivery as per photos Duedpjtvctqjfx Agfor

Condition: new, Indramat TCM 2.1-02-7 A.C. Servo Capacitor-TCM , unused, good condition, 100% functional Dodpfx Aei Ebmmjgfsur

Condition: good (used), Thread Cutting Machine Berg + Schmid Delta 4 Product Description Cutting range: R 1/3 - 4", M8-M52 Powerful capacitor motor 230V-1 kW, exceptionally quiet operation 3 speeds: 15+27+58 rpm (also under full load, built-in gearbox) With 2 automatic thread cutting heads: R 1/2 -2", R 2 1/2 - 4" Complete with cutting dies: R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", conical DIN 2999 Automatic cooling directly through the cutting head Quick-release chuck, pipe cutter, internal pipe reamer Duedeyy S Efopfx Agfjr Includes occupational safety equipment with safety foot switch and 4 support legs

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Djdpoywztgefx Agfeur Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: excellent (used), Year of construction: 2013, operating hours: 300 h, functionality: fully functional, machine/vehicle number: M3BP355LKA2 (500kW) - M3BP355LKB2 (560 kW) -, power: 500 kW (679.81 HP), nominal power: 485 kW (659.42 HP), rotational speed (min.): 600 rpm, rotational speed (max.): 3,600 rpm, input voltage: 690 V, input frequency: 50 Hz, type of input current: AC, overall weight: 2,320 kg, total length: 1,764 mm, total width: 700 mm, total height: 958 mm, torque: 1,601 Nm, type of cooling: air, protection type (IP code): IP55, fuel type: electric, color: grey, 3 ABB ELECTRİC MOTORS AND 3 ACS 800 VFDs ( CAN BE PURCHASED SEPERATELY - 3 motors for 150,000 Eur & 3 VFDs for 60,000 Euro) 3 Electric Motors – Technical Specifications Power: 500, 560, 630 kW Nominal Power: 485–543.2–611 kW Rotational Speed (min–max): 600–3600 rpm Input Voltage: 690 V Input Frequency: 50 Hz Torque: 1601–1792–2014 Nm Cooling Type: Air Protection: S1 IP55 Weight: 2320–2460–2650 kg Dimensions • Length: 1764–1764–1851 mm • Width: 700–700–840 mm • Height: 958–958–1040 mm profi Motor Maintenance Notes • Latest maintenance work was performed by ABB Turkey on 23/03/2021. • Total operating hours since maintenance is 300h. • Air cooler of 560 kW motor is changed with an upgraded version. The original cooler is also available. • Bearing and body temperature sensors are complete and fully functional. • All bearings and winding insulations were completely replaced during the maintenance. • Motors are packaged and stored in our warehouse _____ 3 VFD Drives – ABB ACS800 Series (Technical Specifications) Latest maintenance work was performed on 29/04/2022. The VFDs has only been operated for 100 hours after the maintenance. Capacitors are of recent date. The circuit boards and other electronic components are in good condition. All drivers have Profibus. Motors are packaged and stored in our warehouse ACS800-07-0870-7 + K454 + 2L505 + P902 + P904 + R700 + V922 Dujdpfoxwyaiox Agfsr Input Current: 655 A Input Voltage: 525–690 V Input Frequency: 45–63 Hz Output Current: 729 A Output Voltage: 690 V Output Frequency: 300 Hz Cooling: Air-cooled ACS800-07-0750-7 + K454 + 2L505 + P902 + P904 + R700 + V922 Input Current: 565 A Input Voltage: 525–690 V Input Frequency: 45–63 Hz Output Current: 628 A Output Voltage: 690 V Output Frequency: 300 Hz Cooling: Air-cooled ACS800-07-0610-7 + E205 + E208 + E210 + K454 + L303 + 2L505 + P902 + P904 + R700 Input Current: 533 A Input Voltage: 525–690 V Input Frequency: 45–63 Hz Output Current: 560 A Output Voltage: 690 V Output Frequency: 300 Hz Cooling: Air-cooled

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine. • Swivel head: ±90° • Spindle & drives (INDRAMAT): Dsdpsya D Svefx Agfour • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Net filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 6,500 mm, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm Dusdpfx Agjx D I H Dsfor • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Water pressure exchanger max: 10bar Dusdpfxecpwhbe Agfsr Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. Dodpfx Agev T Truofeur - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor Dsdpfx Asyha U Nsgfsur -Type: LC1D245...C -Contactor coil: LX9FG220 -Number: 2x contactors available -Price: per piece -Dimensions: 200/170/H180 mm -Weight: 4.6 kg/pc.

Condition: good (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RH2131-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece -Dimensions: 60/45/H120 mm Dujdpfxjydk N Ne Agfer -Weight: 0.3 kg/pc.

Condition: good (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2026-1BB40 / 3RH2911-1GA40 Dedpfxsydk Ede Agfsur -Number: 16 switches available -Price: per piece -Dimensions: 85/45/H150 mm -Weight: 0.6 kg/pc.

Condition: like new (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 5800, Satellite blasting system for cleaning with nutshell granules (our application: capacitor coils). Other blasting media available Dsdpfxjvnrymj Agfeur

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 220 kg, total length: 610 mm, total height: 2,000 mm, total width: 805 mm, input voltage: 400 V, control cabinet height: 2,000 mm, control cabinet length: 610 mm, control cabinet width: 805 mm, input frequency: 50 Hz, control voltage: 230 V, protection type (IP code): IP20, We are offering this used Eskap ESR-7000 (-S485) power factor correction system, 100 kvar, year of manufacture 2022. Ready-to-connect, regulated power factor correction system for the automatic compensation of reactive power, ESKAP modular design in accordance with IEC / DIN EN 61439-1 and -2, IEC / DIN EN 60831-1 and -2 and DIN EN 61921. Rated voltage: 230 / 400 Volts, 50 Hz Rated power: 100 kvar, step power: 25 kvar Configuration: 2 x 25 – 50 kvar, expandable in the same cabinet up to max. 200 kvar Modules spaced approx. 100 mm apart Contactors with pre-charging resistors for damping inrush current peaks Group protection with NH fuse-switch disconnectors MKP three-phase capacitors with discharge resistors, UN = 525 Volt 7% detuned to protect against ripple control frequencies > 228 Hz Reactors with high linearity, temperature monitoring Temperature class T40/B, insulation class F 12-step four-quadrant controller with self-adaptation Ventilation via ball-bearing roof fans Permissible ambient temperature: -10°C to +35°C (24h average), +40°C (short-term max) Dsdpfx Agoyiryyofjur ESKAP floor-standing cabinet, dimensions 2000 x 805 x 610 mm (H x W x D) Protection class 1, IP20, color: RAL 7035 Cable entry from below, door hinge right, weight approx. 220 kg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dusdpfx Aotty Rajgfsr Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Duodpfouy Thmox Agfsr Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: new, REMS Orkan 1360 electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support the exchange of air in damp, musty cellars, to support the drying of e.g. concrete, masonry, plaster, screed and for filling e.g. inflatables, hot air balloons. Capacitor motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1360m³/h. In sturdy plastic housing. In cardboard box. Dujdpfjuyg Utox Agfer Air volume: 1360 m³/h Power: 145 W

Condition: ready for operation (used), Year of construction: 2010, Nominal power: 160kVA, including NH isolator with capacitors, GBE T119 DIN monitoring, 5 medium-voltage switches and 1 measuring transformer cabinet with instrument transformer. weight: 1.06t. On-site inspection is possible. Djderck D Hjpfx Agfeur

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Duodpfx Agjxal Haofer Operating hours: 3888 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, contactor type 3RT1045-1AP04-3MAO with auxiliary switch orig -Auxiliary switch: type 3RH1921-1HA22 -Number: 4x available -Price per piece -Dimensions cardboard: 150/75/H205 mm Dodpfx Ajiiihfjgfour -Weight: 1.8 kg/pc.

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DIL0M -Price: per piece -Quantity: 2 available Dodsb A S N Nopfx Agfour -Weight: 0.4 kg/piece

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: 3TF42 22-0BB4 -Quantity: 1 available Dujdpfx Agob A Rbzefsr -Weight: 0.7 kg/