Used Carpet Paternoster for sale (447)

Year of construction: 2003, condition: used, functionality: fully functional, empty load weight: 3,500 kg, total length: 1,600 mm, load capacity: 42,000 kg, Tragedorn Load center: 1200 ISO class: Terminal West Condition: Ready for use and fully functional Technical condition: very good Description: Length: 1600 mm, Diameter: 400 mm Pjdpfx Aijz Evnvorerc

Condition: excellent (used), Year of construction: 2023, We have a Kardex Shuttle XP 500 from 2023 for sale, in very good condition. The machine has been regularly serviced by the manufacturer and is well maintained. With a height of 11,950 mm, 48 trays measuring 3,650 × 813 mm, and a load capacity of 440 kg per tray, it provides approximately 143 m² of storage space while occupying only 5.93 m² of floor space. Equipped with a light pointer and confirmation buttons, it offers an efficient picking solution when connected to a business system or WMS. An excellent solution for maximizing storage capacity while minimizing floor space. Technical Information: Model year: 2023 Model: SHUTTLE-XP-500 3650 × 813 Machine height: 11,950 mm Pjdpfx Ae Aaif Reirerc Machine width: 3,980 mm Machine depth: 2,912 mm Tray dimensions: 3,650 × 813 mm Number of trays: Approx. 48 per machine Maximum load per tray: 440 kg Electrical connection: 3/N/PE, 230/400 V, 17 A

Year of construction: 2012, condition: good (used), Type: IND-PA Device No.: 0/1220744/1 Year of manufacture: 2012 Device height: approx. 5600 mm Device width: approx. 2870 mm Device depth: approx. 4000 mm Number of rollers: 45 Roller width: approx. 2370 mm Shelf load capacity: 200 kg Total load capacity: 9000 kg Prsdpfxehyhlgj Airoc Color: beige

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system External dimensions: Overall height 6,010 mm Overall width 3,501 mm Overall depth 1,774 mm 25 carriers, each with a load capacity of 628 kg in the clear internal dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Deposit table at 1,000 mm above floor level, with work surface / plastic surface Color: light gray, surface cleaned, signs of wear possible Motor power, drive: 1 x 5.5 kW / 400 Volt Additional extras: automatic chain tensioning, Prodpfx Ajhfxkasiroc various intermediate shelves, subject to errors and technical changes Delivery and assembly currently mainly in Germany, Austria and several neighboring countries.

Condition: excellent (used), WEINIG UNISTACKER PATERNOSTER STACKER WITH ADDITIONAL HANDLING EQUIPMENT OFFER INCLUDES 1. WEINIG 820 RIGHT ANGLE TRANSFER CONVEYOR. Pjdpfey D Akaox Airsrc 2. WEINIG (5 BELT) 8M LONG SORTING STATION FEEDING TO PATERNOSTER STACKER. 3. WEINIG 811 UNISTACK PATERNOSTER STACKER. 4. 3X STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 500MM. MAXIMUM LENGTH 3100MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE 4. WEINIG 802 SCISSORS LIFT ROLLER CONVEYOR FEEDING TO PACK OUTFEED. 5. WEINIG 812 POWERED ROLLER CONVEYOR OUTFEED. 6. WEINIG CHAIN PACK OUTFEED CONVEYOR

Condition: reconditioned (used), modernized machine with new LTG StoreControl P control system External dimensions: Overall height: 5000 mm Overall width: 2650 mm Overall depth: 1250 mm plus 300 mm discharge table 34 carriers, each with a payload of 140 kg in the clear internal dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch: 254 mm Discharge table at 1000 mm above the top edge of the machine frame, with a wooden worktop Color: GRAY, surfaces cleaned, signs of use possible Psdpfx Aodnfdljirsrc Motor power, drive: 1 x 1.8 kW / 400 Volt Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, total height: 6,000 mm, total width: 2,200 mm, total length: 2,900 mm, load capacity per storage section: 430 kg, input voltage: 380 V, empty load weight: 3,000 kg, Make Model Year Height × Width × Depth Shelves Load capacity: 430 kg HANEL LEAN LIFT 2000 6,000 × 2,200 mm × 2,900 mm 52 (1850mm x 813 mm) Pedpo Afyxxsfx Airorc CPU C2000 Maintained by Kardex until April 2025 Dismantling scheduled for late November 2027, east of Rennes. Loading onto a semi-trailer (tautliner) is possible. Delivery of the dismantled machine is possible, complete with electrical and mechanical layout diagrams, and dismantling videos for those who wish to reassemble it themselves. Alternatively, delivery and reassembly/start-up are possible anywhere in Europe with a maintenance contract. The NT models are no longer manufactured, so spare parts are becoming scarce. That is why we offer maintenance services, as we have a stock of available parts.

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 220 V, empty load weight: 2,000 kg, Ref. Model Year Overall H × W × D Shelves Useful shelf L × W × H, load capacity: 120 kg K1–K2 SYS-120-2011 2006 3,350 × 3,270 × 1,470 mm 20 2,900 × 350 × 260 mm K3 SOLD SYS-120-2011 2008 3,350 × 3,270 × 1,470 mm 20 2,900 × 350 × 260 mm K4–K6 SYS-120-2611 2007 4,200 × 2,660 × 1,470 mm 26 2,200 × 350 × 260 mm K5 SYS-120-2011 2008 3,350 × 2,360 × 1,470 mm 20 2,000 × 350 × 260 mm K7 SOLD SYS-120-2611 2007 4,200 × 2,950 × 1,470 mm 26 2,600 × 350 × 260 mm Prjdpfsz Eci Tsx Airjc maintained by Kardex until April 2026

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Device No.: 03502 Year of Manufacture: 2003 Pjdpfehyhlkjx Airjrc Device Height: approx. 4500 mm Device Width: approx. 2000 mm Device Depth: approx. 7010 mm Number of Rollers: 44 Roller Width: approx. 1680 mm Shelf Load: 150 kg Total Load: 7000 kg Superstructure: see photo, 3000 mm Color: beige

Condition: like new (used), Year of construction: 2019, We now have two Kardex Megamat RS 650 units available. Both machines were manufactured in 2019 and put into operation in 2020. They have been serviced annually by the manufacturer and are in very good condition. The Kardex Megamat RS 650 is a powerful vertical carousel designed for storing and handling heavy goods. Each carrier (base shelf) can hold up to 650 kg, making the machines suitable for storing large and heavy items. The two machines have a total of 34 carriers (base shelves) and 43 trays: 28 carriers without intermediate shelves, with a height of 348 mm 3 carriers with two intermediate shelves, providing a total of 9 trays with a clear height of 115 mm 3 carriers with one intermediate shelf, providing a total of 6 trays with a clear height of 170 mm The machines are also equipped with a Matrix display in the access opening. This LED display shows information such as the picking location, quantity, and other useful details. The Matrix display helps reduce search time and the risk of picking errors, making the picking process faster and easier. To utilize the full functionality of the Matrix display, the machines need to be connected to an ERP or Warehouse Management System (WMS). Prodpfsz Aiwbox Airsc Technical Information: Model year: 2019 Model: MEG RS 650.1.3250.6.406.34 Machine height: 7,835 mm Machine width: 3,975 mm Machine depth: 1,711 mm Number of carriers: 34 Number of shelves: 9 Maximum carrier height: 348 Carrier width: 3250 Carrier depth: 628 Electronics: 3/N/PE 400V, 20A

Condition: used, Year of construction: 1989, Gewinner Euromat Type: Gewinner Euromat Machine No.: 120-50508-18 Prsdpjya Dkljfx Airsc Year: 1989 Machine height: approx. 5600 mm Machine width: approx. 3300 mm Machine depth: approx. 1450 mm + 330 mm table top Number of trays: 18 Tray width: approx. 2450 mm Tray depth: approx. 520 mm Tray height: approx. 500 mm Compartment load capacity: 510 kg Total load capacity: 9100 kg Colour: Beige front / corners blue

Condition: good (used), Kardex Type: SYS - 250-4010-5-13 Device No.: 26596 Year of Manufacture: Device height: approx. 6000 mm Device width: approx. 3000 mm Device depth: approx. 1100 mm + 350 mm tabletop Number of trays: 40 Pjdpfx Aozk Ew Heirerc Tray width: approx. 2500 mm Tray depth: approx. 410 mm Tray height: approx. 230 mm Tray load capacity: 150 kg Total load capacity: 6000 kg Color: Gray Device C in the photo.

Condition: good (used), Kardex Type: IND 400 Equipment No.: 25377 Year of manufacture: Equipment height: approx. 6000 mm Equipment width: approx. 2920 mm Equipment depth: approx. 1100 mm + 350 mm tabletop Number of trays: 34 Tray width: approx. 2250 mm Predpfjzk Ewgjx Airjc Tray depth: approx. 350 mm Tray height: approx. 260 mm Load per tray: 257 kg Total load: 8738 kg Color: Gray Equipment A in the photo.

Condition: good (used), Kardex Pjdpfx Aijzk Ewyjrsrc Type: IND 250-4010-5-13 Equipment No.: 122/25922 Year of Manufacture: Equipment height: approx. 6000 mm Equipment width: approx. 3000 mm Equipment depth: approx. 1100 mm + 350 mm tabletop Number of trays: 40 Tray width: approx. 2500 mm Tray depth: approx. 410 mm Tray height: approx. 230 mm Tray load capacity: 195 kg Total load capacity: 7500 kg Color: Gray Equipment B in the photo.

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Prsdpfxeyiflgj Airjc

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 309719/20/21/22/23/24/27, total height: 6,635 mm, total width: 2,200 mm, total length: 3,200 mm, load capacity per storage section: 2,50,520 kg, type of input current: three-phase, input voltage: 415 V, warranty duration: 12 months, roll pitch: 75 mm, roll width: 1,830 mm, Equipment: safety light barrier, We have 6 of these machines available, all in good working order. On installation they will be refurbished and have 12 months warranty on all parts and labour. Full Service history. Clean environment. Small cosmetic signs of general wear and tear but on the whole excellent looking machines. Each machine is modular and can be reduced in height to meet most height restrictions. We can offer these as supply only however this would not include the warranty. KARDEX MEGAMAT FSE STORAGE LIFT SYSTEM COLOUR - GREY/BLUE MAX LOAD PER TRAY 250KG - 520KG NUMBER OF TRAYS - 40 MACHINE DIMENSIONS HEIGHT 7960mm WIDTH 3250mm DEPTH 2760mm NO WORK TOP TRAY DIMENSIONS WIDTH 2860mm DEPTH 820mm Metal dividers included within machine price - divide the trays internally to accommodate all types of items small and large Operation is currently via a Keypad above the picking port Pjdpfx As Aaqacoirerc We have bespoke software that can be added to the machines - this would include hardware to allow the software to operate, there is basic operation as full operation with our Epic Netstock. This can be fitted at a later date if required.

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. Pedoff Huwspfx Airerc As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 2018, condition: used, - Heating plate format (mm): 2850 x 1550 - Total pressing force (kN): 2400 - Maximum operating temperature: 180 degrees Celsius Vacuum press with 3 paternoster magazines Manufacturer: Wemhöner Type: Variopress - Basic 1000S Year of manufacture: 2018 Technical data Heating plate format (mm) 2850 x 1550 Design of the electric heating plate: Aluminum heating plate on top Total pressing force (kN) 2400 Maximum chamber pressure (bar) 6 Predpfx Aiozuz Eusrsc Maximum operating temperature 180 degrees Celsius Maximum batch or workpiece size (mm) approx. 2460 x 1180 Thermoplastic film as roll stock, film width: approx. 1430 mm Film thickness (mm) approx. 0.25 - 1 Chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls Note: The technical data and descriptions are a copy of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw Podszydafspfx Airsrc - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: good (used), Year of construction: 2011, We now have two Kardex Shuttle XP 500 units, 3050 x 813 mm, from 2011 available for sale. The machines are in good condition and have been regularly serviced since installation. Psdpjzybfxsfx Airorc The Kardex Shuttle XP 500 is a reliable and proven storage system used by thousands of companies worldwide. Each tray is 3,050 mm wide and 813 mm deep, providing 2.5 m² of storage space. The system offers a total of 112.5 m² of storage space while using only 9.87 m² of floor space. Technical Information: Model year: 2011 Model: SHUTTLE-XP-500-3050x813 Machine height: 7,500 mm Machine width: 3,380 mm Machine depth: 2,921 mm Tray width: 3,050 mm Tray depth: 813 mm Number of trays: Approx. 45 / machine Maximum weight per tray: 210 kg Electronics: 3/N/PE 230/400V 17A

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 327.112, total height: 4,910 mm, total width: 3,270 mm, total length: 1,155 mm, load capacity per storage section: 127 kg, construction height: 4,910 mm, construction width: 3,270 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,972 kg, input frequency: 50 Hz, input current: 7 A, Hänel Rotomat 900 vertical carousel storage system, year 2010, in working order and currently in use. Removed only due to warehouse relocation. Ideal for high-density storage of small parts, jewellery, components, engineering stock, pharmaceuticals, archive items and order-picking applications. Manufacturer: Hänel Model: Rotomat 900 Year: 2010 Psdpoyu Rrxefx Airsrc Specification: 22 carriers Max load per carrier: 127 kg Max total load: 2,794 kg Carrier size: 2,838 mm wide x 416 mm deep Machine dimensions: 4,910 mm high x 3,270 mm wide x 1,155 mm deep Stainless work surface 400V 3-phase supply MP12N-S-TFT control system Ethernet / webserver / barcode interface Condition: Machine is powered and can be seen operating Clean, well-kept unit from a jewellery business environment Sold only because of warehouse move Sale terms: Viewing available by appointment Buyer responsible for disconnection, dismantling, loading and transport Further photos / video of operation available on request

Condition: used, functionality: unexamined, The shuttle warehouse features multiple storage levels, allowing for fully automated storage and management of pallets. The pallets are transported into the warehouse via the existing conveyor system and assigned to their respective storage locations by the shuttle system. The multi-level design ensures optimal utilization of the available storage space. The system enables rapid and automated retrieval of pallets for dispatch, which streamlines logistics processes and reduces waiting times. The system is particularly suitable as a buffer warehouse between production, palletizing, and loading, ensuring a continuous flow of materials. Scope: • Fully automated shuttle warehouse • Multiple storage levels for Euro pallets Pjdpjzvc S Ejfx Airsrc • Infeed and outfeed technology • Associated conveyor technology • Control and system technology (where applicable) Functionality unverified, but was in use until recently. ATTENTION: Mobile, small peripheral equipment is not included in this item. Please contact us if you have any uncertainties regarding the scope before placing a bid. We strongly recommend inspecting the item! If interested, please contact us by email!

Condition: excellent (used), Technical Information: 1 Kardex Number of support points: 13 Dimensions: L 3.46 x W 1.70 x H 3.8 m Weight: 2.5 tons Prodoz Ixtyepfx Airec Load capacity per support point: 2 tons

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. The machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 1,300 mm Cross belt: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Longitudinal sanding belt: 2,100 × 1,350 mm Predpfxszxyfho Airjc Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for finish, fine and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 625 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (min.): 5,000 rpm, overall weight: 1,000 kg, 4-knife TERSA cutter head for planer Motor power 7.5 kW Positioning control for the thickness table Segmented infeed roller Segmented pressure bar Feed speeds of 7 + 14 m/min Table extension Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm Thickness table mounted on four support spindles and with 4-point guidance. Heavily ribbed cast iron table, finely planed Modern control panel ergonomically positioned. Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode, Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the Prodpfxjz Dkfto Airec cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear) Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the outfeed pressure bar Two feed speeds 7 + 14 m/min; electrically switchable, also during planing Thickness hood with carpet support, can be used as a storage area for wood. Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site) Air velocity 22 m/s Integrated tool storage compartment for operating tools and planing knives Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual Weight: approx. 1000 kg CE-compliant, BG-Holzstaubgeprüft No. HM 23001 Workplace-related emission values dB(A) according to DIN 45635 Part 1650 Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A) Workplace-related dust emission value: 0.44 mg/m³