Used Carpet Paternoster for sale (501)

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Fsdpfx Asyplqroa Njpg Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: excellent (used), WEINIG 811 UNISTACKER PATERNOSTER STACKER WEINIG 811 UNISTACK PATERNOSTER STACKER. Fpodpfx Ajy I Rvrea Neg 2X STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 600MM. MAXIMUM LENGTH 3600MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. Fpodpfx Aajy Hb Upo Nog PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: excellent (used), WEINIG UNISTACKER PATERNOSTER STACKER WITH ADDITIONAL HANDLING EQUIPMENT OFFER INCLUDES 1. WEINIG 820 RIGHT ANGLE TRANSFER CONVEYOR. Fpjdpfx Aasy D Akas Nog 2. WEINIG (5 BELT) 8M LONG SORTING STATION FEEDING TO PATERNOSTER STACKER. 3. WEINIG 811 UNISTACK PATERNOSTER STACKER. 4. 3X STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 500MM. MAXIMUM LENGTH 3100MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE 4. WEINIG 802 SCISSORS LIFT ROLLER CONVEYOR FEEDING TO PACK OUTFEED. 5. WEINIG 812 POWERED ROLLER CONVEYOR OUTFEED. 6. WEINIG CHAIN PACK OUTFEED CONVEYOR

Condition: new, functionality: fully functional, working width: 450 mm, area performance: 495 m²/h, overall weight: 55 kg, warranty duration: 12 months, input voltage: 230 V, water tank capacity: 45 l, TASKI PROCARPET 45 PROFESSIONAL CARPET AND RUG CLEANER TECHNICAL DATA: Model: Procarpet 45 Manufacturer: Taski Type: Carpet and rug cleaning machine Country of manufacture: Switzerland Series: Professional Condition: NEW Theoretical capacity: 495 m²/h Weight when empty: 55 kg Working width: 450 mm Brush motor: 650 W Suction motor: 1000 W Solution tank: 45 l Waste tank: 45 l Brush speed: 1000 rpm Brush pressure: 10-17 kg Cable length: 15 m Rated voltage: 230 V Dimensions: 82 x 56 x 86 cm (L x W x H) WHY CHOOSE THE TASKI PROCARPET 45 The Taski ProCarpet 45 combines high performance, versatility, and professional cleaning quality. Designed for large surfaces, its 45 cm working width and large tanks (45 liters each) allow for long-lasting cleaning without interruption and increase work efficiency. Fpsdpey Aw A Uofx Aa Neg One of its greatest advantages is the 2-in-1 system, which allows you to choose between a thorough extraction wash and a quick capsule cleaning. In practice, this means you can adjust the method to the level of dirt and time – from deep cleaning to quick refreshment with a short drying time. Another major advantage of this machine is its efficiency. The cylindrical brush and powerful suction system with two suction points ensure thorough dirt removal and very good carpet drying, resulting in a better end result and a faster return to use. Ease of use and ergonomics. - The control panel is intuitive and simple, and the device's design provides excellent visibility of the working area. Professional cleaning. - The machine is equipped with a 45 cm diameter brush and a 45-liter tank, perfectly combining compactness with the ability to clean larger surfaces. Designed for everyday, intensive use. - The Taski Procarpet 45 is a robust, durable, and reliable device, designed for long life and professional use.

Condition: used, Year of construction: 1998, Hänel Model: Rotomat 950 Serial No.: 120.657*3 Year of manufacture: 1998 Machine height: approx. 3,800 mm Machine width: approx. 3,140 mm Machine depth: approx. 1,250 mm + 330 mm tabletop Number of trays: 18 Tray width: approx. 2,880 mm Tray depth: approx. 400 mm Tray height: approx. 310 mm Compartment load: 300 kg Total load: 5,400 kg Colour: Beige front / grey corners Fpodpfxsy D S N Ej Aa Njg

Condition: used, Year of construction: 1998, Hänel Type: Rotomat 950 Machine No.: 120.657*2 Year of manufacture: 1998 Device height: approx. 3800 mm Device width: approx. 3140 mm Device depth: approx. 1250 mm + 330 mm tabletop Number of trays: 18 Tray width: approx. 2880 mm Tray depth: approx. 400 mm Tray height: approx. 310 mm Compartment load: 300 kg Total load: 5400 kg Fjdpfjy D S Nfex Aa Nepg Colour: Beige front / corners grey

Condition: used, Year of construction: 1998, Hänel Type: Rotomat 950 Device No.: 120.657*1 Year of manufacture: 1998 Device height: approx. 3800 mm Device width: approx. 3140 mm Device depth: approx. 1250 mm + 330 mm tabletop Number of trays: 18 Fjdpfx Asy D S Hwsa Njpg Tray width: approx. 2880 mm Tray depth: approx. 400 mm Tray height: approx. 310 mm Shelf load capacity: 300 kg Total load capacity: 5400 kg Colour: Beige front / corners grey

Condition: ready for operation (used), Year of construction: 2007, A vertical Hänel compact paternoster is available. Number of containers: 67, max. container load: 250kg, max. container dimensions X/Y: 1300mm/825mm, height increment: 75mm, max. total load: 20000kg. Documentation available. An on-site inspection is possible. Fodpfxoy Ax Tbe Aa Nspg

Condition: used, Year of construction: 2001, Intertex - EUROMAT Paternoster 250 kg per carrier set Device dimensions: H: approx. 5500 mm D: 1650 mm W: 3520 mm Carrier sets: 22 pieces H: 390 mm Fjdpfx Aevt A Rysa Nepg D: 600 mm W: 2850 mm

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm Fsdpjhfxkasfx Aa Nspg 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, Fpsdpfeff Huwjx Aa Nog • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Fedjup R U Uepfx Aa Nepg Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Condition: used, Year of construction: 2001, Megamat Vertical Carousel Type: 2066/457/16 Machine no.: 21553 Year of manufacture: 2001 Unit height: approx. 5000 mm Unit width: approx. 3500 mm Fsdpfsywidmsx Aa Nepg Unit depth: approx. 1800 mm + 300 mm table top Number of trays: 16 Tray width: approx. 2900 mm Tray depth: approx. 630 mm Tray height: approx. 400 mm Compartment load: 450 kg Total load: 7200 kg Colour: Blue

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: hydraulics, Car carpet washing machine Condition New Brand NMTEH Type Compact water 2 L/min Manufacturer Warranty 1 Year Voltage 220 Model Fpedpfx Aov A T Tqea Nsg NMTEH Country/Region of Manufacture - Latvia Cord Type Corded Power: 2,5kW Item Weight ~200kg Auto carpet washing machine The difference from other devices - does not break the embedded plastics Cleans well fabric and rubber mats Cleans rubber carpets up to 20mm high edges Hard carpets that are thick. Ours is universal and will work a long time. Blow system Without water cleaning With water cleaning automatic heating system Water conection 3/4

Year of construction: 2012, condition: good (used), Type: IND-PA Device no.: 0/1220744/1 Year: 2012 unit height: approx. 5600 mm Fpodpfx Aashyhlgs Nog unit width: approx. 2870 mm unit depth: approx. 4000 mm number of rolls: 45 Roll width: approx. 2370 mm shelf load: 200 kg Total load: 9000 kg Color: beige

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Device no.: 03502 Year:2003 unit height: approx. 4500 mm unit width: approx. 2000 mm unit depth: approx. 7010 mm Number of rolls: 44 Roll width: approx. 1680 mm shelf load: 150 kg Total load: 7000 kg superstructure see photo 3000 mm Color: beige Fpjdpjhyhlksfx Aa Nog

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 2,500 mm, total width: 700 mm, load capacity: 750 kg, total length: 5,300 mm, number of shelf rows: 5, shelf length: 1,700 mm, For sale: Metal display rack for carpets, rugs, and curtains. The rack is new, with external dimensions 5300x2400x700 mm (LxHxW), color anthracite grey, RAL 7016. The sliding system operates on rollers and galvanized tubes, and carpets are held with spring clamps. One assembled module looks exactly as shown in the photos! The rack is stable and does not require floor anchoring. We provide an invoice with deductible VAT! Price plus VAT! Fpodpow S Iqmsfx Aa Neg

Year of construction: 1996, condition: good (used), For sale we offer a used Kardex/Paternoster. technical features: Length 3.400mm width incl. tray 1.960mm width without tray 1.650mm Height: 6.200mm Fsdpfx Aaokuyk As Njpg Compartments: Length: 2.950mm Width: 620mm Height: 110mm If you are interested, please contact us.

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm Fedpfx Aednfdlsa Njpg W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: good (used), Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, storage boxes, shelf boxes -6620x Storage bins: various sizes -771x storage bins Dimensions: 550/174/H110 mm Fpedpfx Aajdqc Hwe Neg -3483x Storage bins Dimensions: 175/135/H110 mm -2112x storage bins Dimensions: 275/175/H110 mm -30x storage boxes dimensions: 138/86/H110 mm -172x storage bins Dimensions: 174/136/H96 mm -56x storage boxes dimensions: 274/174/H96 mm -Sale: only complete

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Fsdpfxsyiflge Aa Nopg

Condition: ready for operation (used), Year of construction: 1991, A roll paternoster ESKA storage and loading system is available. Roll width: 1600mm, max. load capacity: 2800kg, total height: 4300mm. Documentation available. An on-site inspection is possible. Fsdpfew I E Dcox Aa Nspg

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 5,000 kg, Crane arm Fpodpfx Aow Egnrsa Nsg ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical condition: good Description: Year 2016 ISO 4A (61 cm) Capacity 5,000 kg Length 4,000 mm ID OS1608

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 5,000 kg, Crane arm ISO class: ISO class 4 = 5,000 - 10,000 kg Fedpfx Aasw Egl Do Njpg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019, ISO 4A (61 cm), capacity 5,000 kg, length 4,000 mm, ID OS1589