Used Suction Belt for sale (11,437)

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros Dwsdpfjy Erxvox Aptsb incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: used, No. 10019 Various conveyor belts Used Consisting of 6 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Dsdswhp H Nspfx Aptjwb Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, conveyor belt length: 4,450 mm, conveyor belt width: 600 mm, total length: 4,500 mm, total width: 800 mm, total height: 600 mm, overall weight: 550 kg, discharge height: 3,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, input frequency: 50 Hz, 371 conveyor belt 445x60cm paddle conveyor belt High performance paddle conveyor belt for sale in excellent condition length: 445cm speed: 18-21 meters/minute belt width: 60cm total width: 80cm belt paddle height 8 cm belt tray size: 52x29x8cm stainless steel cover steel frame drive: geared motor 380/220v 50hz 1.1kw Djdpfoygcupjx Aptjwb weight: ca 550kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, total length: 3,100 mm, total width: 550 mm, total height: 900 mm, overall weight: 80 kg, power: 0.18 kW (0.24 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Aluminum frame conveyor belt 310x40cm 8m/min speed sorting belt conveyor Dwjdpfsydp Tgjx Aptob mobile aluminum frame horizontal conveyor belt for sale in excellent condition length: 3100mm belt width: 400mm full width: 480mm speed: 8meters/min drive: geared motor 0.18kw 50Hz belt material rubber fabric green color. frame material aluminum profile. height: 820mm adjustable/tilting legs braked wheels.

Condition: excellent (used), Year of construction: 2010, I sell the set of 3pcs. Grecon Dimter belt conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Total length 2,00m Band width 300mm Dodpfx Aot Rt I Heptjwb Feeding with electric motor 0,37kW / 0,55HP Fully working. Available immediately.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Dwjdpfx Apox Twcpstjb

Condition: new, width of the strips 75.0 mm Dsdpfsxaaq Tox Aptjwb band length 2000 mm band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user Dwjdsxabtcopfx Aptob - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt Dsdpfexabhgjx Aptewb - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm Dwsdpoxabtijfx Apteb total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 Dwodpjxabkzsfx Aptjb - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: used, functionality: unexamined, Year of construction: 1995, total length: 1,16,000 mm, overall weight: 21,000 kg, Used belt conveyor length approx. 116mtrs. Includes: -10pcs of 9mtr + 1pc of 4m + 1pc of 12m modules -Tail/loading section, needs some re-conditioning - Drive station -Tripper unit, it can travel approx 100mtrs along the conveyor operated by winch + steel cable (not included) and discharges material to both sides of conveyor -Counter weight tensioning station -1000mm EP400/3 4+2 conveyor belt -Siemens motor 37kW + Kumera gear -Roxon belt cleaners. -Hanging square tubing, hangers at 3m pitch -Has been dismantled form bolt-joints Dodpfx Apszkkmaotswb -All drums + drive motor/gear spinning freely, not stucked

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 Dwedpfxsxabf Es Aptsb - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dwsdpfxoxaarqs Aptjb Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 72.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Abrasive belt 75 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle Dsdpfx Apsxab Aketjwb - Separate off button - Machine base

Condition: used, trough conveyor belt conveyor belt with high load capacity total length: 1000cm tape width: 80 cm total width: 122cm steel tube frame structure. Dwsdpfjt Aagyex Aptob steel guide rollers strap thickness: 0.8 cm drive: currently not equipped "If required, we can add a geared motor.

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dwodpfx Apeudxchstjb Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. Dwjdpfx Apstwzyfetjb - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm Dwsdpfx Asxab Dzsptsb motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: new, width of the strips 150 mm Dsdpfx Apoxabp Dotowb band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules Dwodpfx Asxabaijptsb - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Year of construction: 2023, condition: used, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Dwsdpfxszy Ulxj Aptsb The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a belt tensioning system from the manufacturer Humboldt, model: HU600.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: FS 07/11-91, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 4,800 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 5,500 mm, Old but reliable! Felder / Austria F2000 Dodozzrtiopfx Aptowb Ready for demonstration – forklift loading possible – operational Demo run via WhatsApp – video available.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.125.681, working width: 1,100 mm, overall weight: 2,500 kg, grinding belt length: 1,890 mm, grinding belt width: 1,110 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 2 Unit 1 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Max. working width: 1,100 mm Min. working height: 30 mm Max. working height: 183 mm Infeed table length: 400 mm Outfeed table length: 250 mm MACHINE DETAILS Feed motor power: 0.75 kW Voltage: 380 V Current consumption: 36 A Fusing: 63 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,800 x 2,320 mm Unladen weight: 2,500 kg Dwodpjzxcmzjfx Apteb Number of transport packages: 1 EQUIPMENT CE marking

Condition: used, functionality: fully functional, On offer: SAC RTE 1000 wide belt sander, with pressure shoe The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its ability to calibrate and precisely finish-sand. The unit with a hard rubber roller is responsible for leveling the surface, and the pneumatic pressure shoe with a "creep feed" function allows for precise finishing of the component. The two-speed motor and two conveyor speeds allow the operating parameters to be adjusted to the material being processed. Specifications: • Manufacturer: SAC • Model: RTE 1000 • Working width: 1000 mm • Maximum height of the workpiece: 165 mm • Number of sanding units: 2 • One combined unit: hard rubber roller, 160 mm diameter + pressure shoe • Pneumatic pressure shoe with "creep feed" function • Main two-speed motor: 10 / 12 kW • Number of conveyor speeds: 2 • Electric adjustment of the work table height • Abrasive belt blowing system • Abrasive belt dimensions: 1900 × 1000 mm • Dust extraction port: Ø200 mm • Overall dimensions: 145 × 210 × 190 cm (L × W × H, without the guard) Applications: • Calibrating and leveling solid wood components Dwodpjzvuy Ijfx Aptsb • Sanding panels and glued components • Inter-operation sanding • Precise finishing sanding using the pressure shoe • Processing components with a width of up to 1000 mm and a height of up to 165 mm • Preparing surfaces for lacquering, oiling, or further processing Additional information: • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-community sales with a VAT rate of 0%; for domestic sales, 23% VAT will be added. Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.