Used Carriage for sale (2,022)

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2460068, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, tire size: 0,41 x 0,13 m, color: red, transport length: 2,800 mm, transport width: 990 mm, transport height: 1,990 mm, Equipment: UVV, Technical specifications Year of manufacture: 2016 Motor: Electric (2 x 1.5 kW) Working height: 9.85 m Platform height: 7.85 m Max. lateral outreach: 3.15 m Laedpfoyqzfbsx Alyoh Basket capacity: 200 kg Upper carriage rotation: 350° Platform dimensions (L x W): 1.11 m x 0.93 m Overall dimensions (L x W x H): 2.80 m x 0.99 m x 1.99 m Boom length: 1.50 m Weight: 2,650 kg Climbing ability: 25% Travel speed: 0.65 km/h - 5 km/h Fully operational, general signs of use

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type T 35 – CE Version ----- Working width: 3000 mm Working height: 2000 mm Manufacturer’s Technical Description: Item 1 00001931 S&S FRAME PRESS, Type T 35 Item 2 Lodpfxed Ih H Nj Alysah 00003701 Medium-pressure beam with double-acting pressure cylinder, weight compensation, pressure hose, and shut-off valve, up to 2000 mm high Sturdy welded frame construction made of thick-walled special hollow sections; sliding carriage and pressure beam with 50 mm hole spacing. Continuous abutment on the left side for wide-span compaction; lower abutment in 2 levels. Vertical press cylinders mounted on special pressure beams with one-hand quick adjustment and weight compensation, height-adjustable in 50-mm hole spacing. Long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing-mounted carriage with central locking, secured in 50-mm hole spacing. Upper horizontal press cylinder is infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering holes for the two abutment levels, without weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm. Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 60 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick adjustment, 2 horizontal pressure cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 130 bar, corresponding to 550 to 3,500 kg of vertical pressing force. Equipped with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Painted in RAL 7035 light gray with RAL 7016 anthracite gray. ----- Price of the above machine available upon request! ----- ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment including a beveling device, counter profiles for single-part production, and much more! Request the complete price list from us! ----- (Technical data according to the manufacturer, subject to change; the illustration may show optional equipment!)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,787 h, load capacity: 1,400 kg, lifting height: 7,360 mm, free lift: 2,300 mm, fuel type: electric, mast type: triplex, construction height: 3,050 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,532 kg, total height: 3,050 mm, total length: 1,750 mm, total width: 1,270 mm, fuel: electricity, Equipment: sideshift, LINDE R 14 - 01 – Reach trucks TECHNICAL DATA Laedpfjz R Ugwsx Alysh Lifting capacity: 1.400 kg Lifting height: 7.360 mm Closed height: 3.050 mm Free lift: 2.300 mm Mast: Triplex (3F736) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2015 Charger: Dreiphasig 48 V 80A not tested Tyres: Polyurethan Poly Service weight: 3.532 kg Length: 1.750 mm Width: 1.270 mm Year of manufacture: 2016 Operating hours: 4.787 h Condition: working condition EQUIPMENT 4th valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309270 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,179 h, load capacity: 1,700 kg, lifting height: 8,000 mm, free lift: 2,630 mm, fuel type: electric, mast type: triplex, construction height: 3,400 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,791 kg, total height: 3,400 mm, total length: 1,850 mm, total width: 1,250 mm, fuel: electricity, Equipment: sideshift, STILL FM-X 17 – Reach trucks TECHNICAL DATA Lifting capacity: 1.700 kg Lifting height: 8.000 mm Closed height: 3.400 mm Free lift: 2.630 mm Mast: Triplex (3F800) Fork length: 1.150 mm Fork carriage: 2 A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2013 Charger: Dreiphasig ohne / without Tyres: Polyurethan PU PU / PU Service weight: 3.791 kg Laodpfx Asz R Uawslysh Length: 1.850 mm Width: 1.250 mm Year of manufacture: 2013 Operating hours: 9.179 h Condition: working condition EQUIPMENT 4th valve ATTACHMENTS Sideshift Internal no.: 1309062 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Lasdpfx Aljzilz Neyeh Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Increased through-height 1,000 mm, Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Laodpjzua N Ssfx Alysh Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Machine table with clamping bars in the transverse direction, each 750 mm Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 550 h, load capacity: 8,000 kg, lifting height: 4,750 mm, load center: 600 mm, fuel type: gas, mast type: triplex, gearing type: automatic, fork length: 2,400 mm, fork width: 150 mm, fork thickness: 70 mm, front tire type: cushion tires (non-marking), front tire size: 8,25-15, rear tire type: cushion tires (non-marking), Equipment: UVV, cabin, full service history, hydraulic fork positioner, lighting, pallet forks, sideshift, We are offering this used Linde H80T forklift, manufactured in 2018. Excellent condition. Fuel type: LPG Mast type: Triplex (195) Mast lift height: 4,750 mm Maximum tilt angle: 7° Lsdpfjz R Upxex Alyjah Load center: 1,200 mm Side shift: ± 0 mm Tires: 8.25-15, SE-Zw Fork carriage and fork dimensions: 2400 x 150 x 70 mm Fork adjustment – side shift – full cabin – double bottle holder – lighting – blue spot Fork capacity at a load center of 600 mm: 4000 kg If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 14,768 h, load capacity: 6,000 kg, lifting height: 7,550 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, construction height: 3,490 mm, fork carriage width: 1,520 mm, fork length: 1,600 mm, empty load weight: 13,174 kg, total length: 5,050 mm, drive type: Elektro, construction width: 2,400 mm, Electric Sideload Forklift Lajdpfx Alsz Ev U Aeyjh Load Center: 800 mm Fork Width: 200 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tires Type: Pneumatic Front Tire Size: 355/65-15 Rear Tires Type: Pneumatic Rear Tire Size: 355/65-15 Battery Voltage: 120V Battery Capacity: 930Ah Battery Manufacturer: ` Battery Year: 2021 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive rates are always possible. We are also happy to purchase your used equipment outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice about this EGX60/16/75TR. P.S.: Our in-house forklift master workshop specializes in repair, overhaul, refurbishment, and custom builds for forklifts from 8 tons upwards. We can also offer your vehicle for commission sale at our premises. Fork Positioning System, 1x NIVO Fork; Fork carriage tilt; Fork positioner opening range: 465 / 1460 mm Heater, Full Cabin, Full Free Lift, Platform height: 1050 mm

Condition: used, operating hours: 12,386 h, lifting height: 3,450 mm, fuel type: electric, mast type: duplex, fork length: 1,400 mm, fork width: 1,250 mm, total height: 2,650 mm, total length: 2,730 mm, total width: 1,450 mm, color: blue, Year of manufacture: 2006 Empty weight: 7.200 kg Lifting capacity: 5.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FN337512 - Operating hours: 12386 - Lifting capacity: 5000kg - Lifting height: 3450mm - Overhead clearance: 2650mm - Free lift: 0mm - Fork length: 1400mm - Maximum fork width: 1250mm - Minimum fork width: 300mm - Number of wheels: 4 Wheels - Attachment: Side-shift, 4th valve to fork carriage - Options: Work lights, Non-marking tires, Full cabin, Heating - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 6 PzS 930 - └ Capacity: 930Ah - └ Battery voltage: 80V - └ Battery test result: 72% - Transport dimensions: 2730mm x 1450mm x 2650mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lodpjza T Ndofx Alyoah VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2017, operating hours: 9,000 h, Type of fuel: LPG Year of manufacture: 2017 Colour: Yellow Operating hours: 9.000 Empty weight: 4.170 kg Dimensions (LxBxH): 250 x 122 x 277 cm Lifting capacity: 2.500 kg Lift height: 433 cm Fork dimensions: 1.200 x 1.010 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: D875B04618R - Operating hours: 9000 - Lifting capacity: 2500kg - Lifting height: 4330mm - Overhead clearance: 2790mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1010mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Work lights - Mast: Duplex Lajdpfxeztu I Tj Alyeh - Drive: LPG - Motor brand: PSI - Transport dimensions: 2500mm x 1220mm x 2770mm (l x w x h) - Transport weight [kg]: 4170kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, operating hours: 11,070 h, lifting height: 4,450 mm, fuel type: diesel, mast type: duplex, fork length: 1,195 mm, fork width: 1,800 mm, total height: 3,040 mm, total length: 3,200 mm, total width: 2,000 mm, color: red, Year of manufacture: 2006 Empty weight: 7.000 kg Lifting capacity: 5.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394T01696 - Operating hours: 11070 - Lifting capacity: 5000kg - Lifting height: 4450mm - Overhead clearance: 3040mm - Fork length: 1195mm - Maximum fork width: 1800mm - Minimum fork width: 250mm - Number of wheels: 6 Wheels - Attachment: 3rd valve to fork carriage - Options: Joystick, Half cabin, Work lights, Heating, Air tires - Mast: Duplex - Drive: Diesel - Motor brand: VW - Transport dimensions: 3200mm x 2000mm x 3040mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Laedpfezwc Tfex Alysh

Condition: used, lifting height: 2,760 mm, fuel type: diesel, General information Year of manufacture: 2024 Weights Empty weight: 3.500 kg Functional Lifting capacity: 200 kg Working height: 1.050 cm Dimensions of cargo space: 616 x 202 x 276 cm Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: France Elévateur Model: Topy 10.2 Year of build: 2024 Condition: Used Data: Gear type: manuell Lasdpfxewn Hr Nj Alyoh Max. working height: 10,50 m Max. platform height: 8,50 m Max. reach (200 kg): 4,80 m Total dimensions LxWxH: 6,16 x 2,02 x 2,76 m Platform dimensions (outside) LxWxH: 1,00 x 0,75 x 1,11 m Max. basket load: 200 kg Max. Number of people: 2 Swivel range of the upper carriage: 2x 200° Engine: Mercedes Benz Displacement: 1.950 cm³ Performance: 110 kw Colour: weiß Driving license class: B / 3 Own weight: 3.500 kg Special features: insulated work basket, socket in the basket, AdBlue.

Condition: used, operating hours: 10,634 h, lifting height: 4,950 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 1,200 mm, General information Year of manufacture: 2019 Year of construction: 2019 Weights Empty weight: 6.980 kg Functional Lifting capacity: 4.000 kg Maximum passing height: 322 cm Number of valves: 3 CE mark: yes Condition Lodpfx Aloz I A Nfoyeah General condition: average Technical condition: average Visual appearance: average Other information Mast type: duplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids - Roof window = More information = Make of engine: kubota Number of valves: 3 Fork carriage: Other Please contact Bas Sindorf , ) for more information

Condition: new, functionality: fully functional, Year of construction: 2026, power: 18.98 kW (25.81 HP), fuel type: diesel, maximum speed: 26 km/h, empty load weight: 920 kg, overall weight: 1,800 kg, tire condition: 100 %, number of cylinders: 3, total length: 2,677 mm, motor manufacturer: Mitsubishi, total height: 2,192 mm, gearing type: mechanical, number of gears: 12, Equipment: front-end loader, ⭐️✅ Special offer price for this configuration: Model: Startrac 26 compact tractor Tires: Industrial tires Front loader: Original Startrac front loader incl. bucket & EURO attachment Premium FOPS package: Original Startrac FOPS, weather protection roof, and LED headlights Note: This package is included as standard with all models with a front loader! Color: NATO green Price: €15,990 gross (incl. 19% VAT) ✅ Your advantages with us: Directly from the general importer: Benefit from the best prices, direct support, and maximum expertise. Extensive dealer network: Nationwide service and local contacts near you. 500 m² showroom: Visit and test our machines on site! Immediately available: Large selection of stock vehicles and accessories. Test drive: Convince yourself of the quality. Service: Own spare parts warehouse & workshop support. Warranty: 24 months manufacturer's warranty ✅ Versatile – the STARTRAC Are you looking for a reliable partner for your farm, stable, or garden? The STARTRAC 26 is the powerhouse among compact tractors – robust, versatile, and ready for immediate use! ✅ Registration documents included: COC documents FIN confirmation TÜV confirmation The tractor is immediately ready for registration! ✅ Tire options & prices: Startrac 26 manual transmission: Lajdpfx Aez Rprmolyoh Base price Startrac 26 with agricultural lug tires: €10,990 gross Additional tire options & equipment available at an extra cost: Radial tires: +€400 gross Galaxy Garden Pro: +€400 gross Industrial tires: +€500 gross Turf tires: +€500 gross Front loader incl. bucket and FOPS Premium roof package: +€4,500 gross Front three-point linkage: +€2,500 gross Full cab incl. heater: +€5,500 gross All prices quoted include 19% VAT, assembly, and pre-carriage – guaranteed without any hidden additional costs. ✅ Front loader – Technical details: Original Startrac front loader (manufacturer quality) EURO attachment Lifting capacity: 500 kg Parallel linkage Shock absorber 12mm steel struts Removable Control circuit with floating position Joystick control Quick coupler LED-illuminated Startrac logo

Condition: used, For sale is a used floor conveyor system from Louis Schierholz GmbH, taken from the oven areas of an industrial wheel painting line. The conveyor technology offered is for the transport of vehicle wheels or aluminum rims. The original design documents from Widmer+Ernst / VGT AG date back to 1998. This date refers to the design status; the actual year of construction of the conveyor system was 1999/2000. A precise model designation is not currently known. Laeds Aar Tdjpfx Alyjh Information from the design documents: - Conveyor speed: 1.6 m/min - Primer oven: 59 m conveyor length - Primer drying oven: 40 m conveyor length - Primer baking oven: 80 m conveyor length - Clear coat baking oven: 64 m conveyor length - Total length of originally documented oven conveyor sections: 243 m The 243 m is a design specification and not a guaranteed delivery quantity. It is not certain whether all rails and components of the original sections are still available. The actual quantity available and the definitive scope of delivery will be determined and agreed upon jointly during an inspection prior to purchase. The system is designed as a floor-mounted rail guidance system with straight and curved sections, as well as vertical workpiece carriers. The offer includes the rail system, the chain and the tool carriage, as well as the tool holder. Control and drive systems are not part of the offer. The exact scope of the available parts will be determined during the inspection prior to purchase. Location: 36381 Schlüchtern. Price upon request.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,661 h, load capacity: 4,000 kg, lifting height: 5,250 mm, fuel type: gas, mast type: triplex, construction height: 2,450 mm, drive type: Treibgas, Four-way reach truck Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Ljdpfx Als Aat Euoyoah Fork carriage, side shifter, fork positioner, 3rd valve, 4th valve.

Condition: used, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. By means of these cyclic loads and the accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the carriage All-round grids in the carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 %, 50 Hz Nominal power: 30 kW Nominal current: 50 A Refrigerant: R-404a /R-23 Refrigeration unit: Water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Ljdpfx Alowbdv Soyjah Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Lajdpezn N Ikefx Alyeh

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 132 h, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,140 kg, total length: 5,065 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 100 mm ISO class: Terminal West Mast type: Duplex Transmission: ZF 3WG171 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Lasdpfx Aljz Ewg Heysh Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We will also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCG180-6. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Side shifter, fork positioner Fork carriage with central leveling; fork positioner opening range: 600 / 2355 mm Rear work light, front work light, heater, full cabin, air conditioning, full free lift, CE certificate, scale, Central lubrication system; 1 rear-view camera on the roof with monitor in the cabin, 1 camera in the mast in combination with the rear-view camera, tire pressure monitoring; engine heater 220 V; Grammer Actimo XL air-suspended driver's seat including seat heating, Forrex fire extinguishing system.

Condition: used, empty load weight: 5,800 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire condition: 45 %, load capacity: 32,200 kg, Multiple positions 1x20’, 2x20’, 40’, 45’ Last axle self-steering Pneumatic unlocking Sliding carriage on hydraulic cylinder with electric power supply Extendable rear bumper Lsdo Abaghspfx Alyjah WABCO Smartboard Disc brakes

Condition: used, Diskus Werke DSH 600/1000 Surface Grinding Machine This machine type is a machine with a motor-driven grinding spindle. The workpieces are clamped and ground using clamping devices adapted to the specific task. The devices are attached to the machine bed. The column carriage, on which the motor spindle is mounted, serves as a feed, dressing, and oscillating slide. Manufacturer: Diskus Type: DSH 600/1000 Operating voltage: 380 V DC voltage: 24 V Control voltage: 220 V Rated power: 27 kW Rated current: 56 A Year of manufacture: 1964 Condition: used Ljdpfxohtyudj Alysah You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Ledpfovvi N Isx Alyeah

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER Lajdpfx Aloz Ebzhjyjh KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Lasdpfx Asvvkipslysh

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Ljdpfxoz Ehvxs Alysah