Used Carriage for sale (2,022)

Year of construction: 1986, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine Rsdpefc R Dwjfx Airoch -Features: On/Off switch, without controls or potentiometer -Motor: 180 V/30 W -Dimensions: 580/370/H280 mm -Weight: 17.5 kg

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type T 35 – CE Version ----- Working width: 3000 mm Working height: 2000 mm Manufacturer’s Technical Description: Item 1 00001931 S&S FRAME PRESS, Type T 35 Item 2 00003701 Medium-pressure beam with double-acting pressure cylinder, weight compensation, pressure hose, and shut-off valve, up to 2000 mm high Sturdy welded frame construction made of thick-walled special hollow sections; sliding carriage and pressure beam with 50 mm hole spacing. Continuous abutment on the left side for wide-span compaction; lower abutment in 2 levels. Vertical press cylinders mounted on special pressure beams with one-hand quick adjustment and weight compensation, height-adjustable in 50-mm hole spacing. Long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing-mounted carriage with central locking, secured in 50-mm hole spacing. Upper horizontal press cylinder is infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering holes for the two abutment levels, without weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm. Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 60 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick adjustment, 2 horizontal pressure cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 130 bar, corresponding to 550 to 3,500 kg of vertical pressing force. Equipped with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Painted in RAL 7035 light gray with RAL 7016 anthracite gray. ----- Price of the above machine available upon request! ----- ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment including a beveling device, counter profiles for single-part production, and much more! Request the complete price list from us! ----- (Technical data according to the manufacturer, subject to change; the illustration may show optional equipment!) Rsdpfsd Ih H Nex Airoch

Condition: new, 1 brand new hydraulic oscillating shear Manufacturer: LAMI NOVA / Exclusive dealership! Model: SC 4006 Max. cutting length: 4100 mm Max. sheet thickness, for normal steel: 6 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Rcjdpod Ad Dbofx Aireh Cutting rate: 14 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 4630 x 2050 x 1700 mm Weight: 9600 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning indicator for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal plates • Central cutting gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the hold-down device • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Fig.: with option! Delivery time: approx. 3 months after order receipt plus pre-carriage costs China - Germany Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,179 h, load capacity: 1,700 kg, lifting height: 8,000 mm, free lift: 2,630 mm, fuel type: electric, mast type: triplex, construction height: 3,400 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,791 kg, total height: 3,400 mm, total length: 1,850 mm, total width: 1,250 mm, fuel: electricity, Equipment: sideshift, STILL FM-X 17 – Reach trucks TECHNICAL DATA Lifting capacity: 1.700 kg Lifting height: 8.000 mm Closed height: 3.400 mm Free lift: 2.630 mm Mast: Triplex (3F800) Fork length: 1.150 mm Fork carriage: 2 A Rjdpfx Ajz R Uaweiroch Drive: Elektro 48V Battery: 48 V 775 Ah v. 2013 Charger: Dreiphasig ohne / without Tyres: Polyurethan PU PU / PU Service weight: 3.791 kg Length: 1.850 mm Width: 1.250 mm Year of manufacture: 2013 Operating hours: 9.179 h Condition: working condition EQUIPMENT 4th valve ATTACHMENTS Sideshift Internal no.: 1309062 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,787 h, load capacity: 1,400 kg, lifting height: 7,360 mm, free lift: 2,300 mm, fuel type: electric, mast type: triplex, construction height: 3,050 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,532 kg, total height: 3,050 mm, total length: 1,750 mm, total width: 1,270 mm, fuel: electricity, Equipment: sideshift, LINDE R 14 - 01 – Reach trucks TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 7.360 mm Closed height: 3.050 mm Free lift: 2.300 mm Mast: Triplex (3F736) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2015 Charger: Dreiphasig 48 V 80A not tested Tyres: Polyurethan Poly Service weight: 3.532 kg Rcjdoz R Ugwopfx Airoh Length: 1.750 mm Width: 1.270 mm Year of manufacture: 2016 Operating hours: 4.787 h Condition: working condition EQUIPMENT 4th valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309270 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2024, operating hours: 1,370 h, Lower carriage NLC, track width 2390 mm Tracks D6C, 3-bar pad shoes, 600 mm, 48 links Track guide, three-part Premium operator seat Monoblock boom, 6.00 m Stick, 3.00 m Includes Verachtert quick coupler CW.S.125 Optional: Quick coupler SW48 Location: Welzow Rcsdpfxozk Aiys Airsh

Year of construction: 2008, condition: used, controller model: Windows XP SP3, power: 9 kW (12.24 HP), working width: 2,500 mm, TECHNICAL DETAILS Maximum working width: 2,500 mm Rcjdpfxoz Ekd Ej Aireh Minimum working width: 510 mm Number of saw blades: 6 + 1 MACHINE DETAILS Control system: Windows XP SP3 Machine programming software: Packsize control console 3.9.3 Total connected power: 9 kW EQUIPMENT Saw carriage CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8534

Condition: used, Year of construction: 2020, INTERMAC VERTMAX 3.3 – Year 2020 Maximum sheet size that can be machined: 6000 x 3300 mm Minimum sheet size that can be machined: 500 x 300 mm Machinable glass thicknesses: 4 - 26 mm Suction cup carriage speed: 80 m/min Y-axis speed: 40 m/min Speed of glass feed on input and output roller modules: 30 m/min Electrospindle power: 1 x 9.5 kW (S1), 1 x 6.5 kW (S1) Maximum spindle rotation speed: 12000 rpm Maximum diameter of the front grinding wheel: 150 mm Maximum diameter of the rear grinding wheel: 100 mm Maximum drill diameter: 80 mm Tool coupling: ISO 40 Tool magazine capacity: up to 18 + 19 positions Maximum power consumption: 63 kW Working direction: Left to Right Rcodpfoz Sr Hpex Aireh Operating hours: 2302

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Rodpfx Aexmhyioirjch Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: used, Year of construction: 2021, Flatbed Cutter Elitron TH 31.20 for Sale. Year of Manufacture: 2021 Two-carriage configuration for increased productivity. Specifications: - Working area: 3150 x 2050 mm - Working speed up to 102 m/min - Two independent cutting heads for materials up to 50 mm thick - Working area divided into 40 individual vacuum sectors - High-efficiency 11 kW vacuum pump integrated into the machine frame - Monolithic frame - Axes driven by linear roller bearings and precision rack-and-pinion system Configuration includes: Rcjdpfxjw Duchj Airoh - One electric oscillating knife module - One pneumatic oscillating knife module - Two tangential modules - Two creasing modules - One 3kW milling module (60,000 rpm) - Two laser pointers - Two marking tools - External dust extractor for milling (3.45 kW) - Seeker System PRO - Video projection system onto the worktable - Twin-Cut software for optimizing the workload of both cutting heads to maximize performance and output The Elitron flatbed cutter is installed in our demo showroom. Inspection and testing are welcome. Installation and training services can be provided for an additional fee.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 550 h, load capacity: 8,000 kg, lifting height: 4,750 mm, load center: 600 mm, fuel type: gas, mast type: triplex, gearing type: automatic, fork length: 2,400 mm, fork width: 150 mm, fork thickness: 70 mm, front tire type: cushion tires (non-marking), front tire size: 8,25-15, rear tire type: cushion tires (non-marking), Equipment: UVV, cabin, full service history, hydraulic fork positioner, lighting, pallet forks, sideshift, We are offering this used Linde H80T forklift, manufactured in 2018. Excellent condition. Fuel type: LPG Mast type: Triplex (195) Mast lift height: 4,750 mm Maximum tilt angle: 7° Load center: 1,200 mm Rcodpfx Aez R Upxeireh Side shift: ± 0 mm Tires: 8.25-15, SE-Zw Fork carriage and fork dimensions: 2400 x 150 x 70 mm Fork adjustment – side shift – full cabin – double bottle holder – lighting – blue spot Fork capacity at a load center of 600 mm: 4000 kg If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization Rcedpjy Alcijfx Aireh • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: repair required (used), Storti PGS 2000 saw carriage Storti TGS 78 panel saw Storti centering device A.COSTA LEOPARD two-arbor track saw Rcsdpfsz Szfzex Airoh Feed rollers and outfeed rollers included

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 14,768 h, load capacity: 6,000 kg, lifting height: 7,550 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, construction height: 3,490 mm, fork carriage width: 1,520 mm, fork length: 1,600 mm, empty load weight: 13,174 kg, total length: 5,050 mm, drive type: Elektro, construction width: 2,400 mm, Electric Sideload Forklift Load Center: 800 mm Fork Width: 200 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tires Type: Pneumatic Front Tire Size: 355/65-15 Rear Tires Type: Pneumatic Rear Tire Size: 355/65-15 Battery Voltage: 120V Battery Capacity: 930Ah Battery Manufacturer: ` Battery Year: 2021 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive rates are always possible. We are also happy to purchase your used equipment outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice about this EGX60/16/75TR. P.S.: Our in-house forklift master workshop specializes in repair, overhaul, refurbishment, and custom builds for forklifts from 8 tons upwards. We can also offer your vehicle for commission sale at our premises. Fork Positioning System, Rodjz Ev U Aspfx Airsch 1x NIVO Fork; Fork carriage tilt; Fork positioner opening range: 465 / 1460 mm Heater, Full Cabin, Full Free Lift, Platform height: 1050 mm

Condition: used, operating hours: 7,219 h, lifting height: 5,150 mm, free lift: 1,730 mm, fuel type: electric, mast type: triplex, fork length: 990 mm, fork width: 650 mm, total height: 2,330 mm, total length: 1,650 mm, total width: 1,300 mm, color: grey, Year of manufacture: 2019 Empty weight: 3.335 kg Lifting capacity: 1.200 kg - Year: 2019 - Documentation available: Yes - CE marking present: Yes - Serial number: 511901V00244 - Operating hours: 7219 - Lifting capacity: 1200kg - Lifting height: 5150mm - Overhead clearance: 2250mm - Free lift: 1730mm - Fork length: 990mm - Maximum fork width: 650mm - Minimum fork width: 210mm - Attachment: Side-shift, 4th valve to fork carriage - Options: Joystick, Non-marking tires, Camera, Free-lift - Mast: Triplex - Inspection valid until: 03-2026 - Drive: Electric - Driving direction: 2 Road - Battery information: Rcsdpoycip Eefx Airoh - └ Brand/Type: 4 HPZS 620 - └ Battery year of construction: 2017 - └ Capacity: 620Ah - └ Battery voltage: 48V - └ Battery test result: 64% - Transport dimensions: 1650mm x 1300mm x 2330mm (l x w x h) - Transport weight [kg]: 3335kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 1997, operating hours: 13,410 h, load capacity: 1,600 kg, lifting height: 4,310 mm, free lift: 1,405 mm, fuel type: electric, mast type: triplex, battery capacity: 1,000 Ah, battery voltage: 24 V, fork carriage width: 1,000 mm, fork length: 1,100 mm, overall weight: 3,000 kg, total height: 2,000 mm, total length: 3,000 mm, total width: 1,050 mm, No. 04537 Electric front forklift Steinbock Boss LE 16-100 MK V A-1 Used, year of manufacture 1997 Approx. 13,410 operating hours Rodsz S U S Ujpfx Airsch Rated load capacity 1600 kg at a 500 mm load center distance Triplex lift mast Lifting height 4310 mm Free lift 1405 mm Hydraulic mast tilt Fork length 1100 mm Fork carriage width approx. 1000 mm Fork adjustment manually adjustable Superelastic tires (SE) Power steering Electric drive, infinitely adjustable Direction switch on the steering column Driver protection roof Driver's seat with seat belt Rearview mirror Headlights Emergency stop switch Battery data according to nameplate: 24 V / 1000 Ah Including automatic charger miditron B, 24 V / 200 A Vehicle length without forks approx. 1800 mm Transport dimensions approx. 3000 x 1050 x 2000 mm LWH Weight approx. 3000 kg To avoid any possible misunderstandings, an on-site inspection is possible and recommended after prior appointment Sale is made in the current condition Technical data, condition description, year of manufacture and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the condition "sold as seen" applies Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex warehouse

Condition: used, Year of construction: 2025, operating hours: 6 h, General information Year of manufacture: 2025 Colour: Grey Operating hours: 6 Technical information Type of fuel: Electric Empty weight: 4.080 kg Dimensions (LxBxH): 260 x 115 x 220 cm Functional Lifting capacity: 2.500 kg Lift height: 485 cm Clearance lift height: 165 cm Fork dimensions: 1.200 x 1.000 mm - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: NL1202572736 - Operating hours: 6 - Lifting capacity: 2500kg - Lifting height: 4850mm - Overhead clearance: 2200mm - Free lift: 1650mm - Fork length: 1200mm - Maximum fork width: 1000mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Free-lift, Work lights, 5-Year warranty on battery - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 76.8V/205Ah(H) - └ Battery year of construction: 2025 - └ Capacity: 205Ah - └ Battery voltage: 76.8V - Transport dimensions: 2600mm x 1150mm x 2200mm (l x w x h) - Transport weight [kg]: 4080kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Rjdpfx Aijxur Ugsrech Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Year of manufacture: 2005 Colour: Grey Operating hours: 10.690 Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage Rcedpfxoyuxm De Airsh - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount Rjdezt Twyspfx Airoch 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Year of construction: 2008, operating hours: 9,240 h, General information Year of manufacture: 2008 Colour: Grey Operating hours: 9.240 Technical information Type of fuel: LPG Empty weight: 4.300 kg Dimensions (LxBxH): 268 x 129 x 259 cm Functional Lifting capacity: 3.000 kg Lift height: 605 cm Clearance lift height: 213 cm Fork dimensions: 1.500 x 970 mm - Year: 2008 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: DF13F-13190 - Operating hours: 9240 - Lifting capacity: 3000kg - Lifting height: 6050mm - Overhead clearance: 2580mm - Free lift: 2130mm - Fork length: 1500mm - Maximum fork width: 970mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Half cabin, Work lights - Mast: Triplex - Inspection valid until: 06-2025 - Drive: LPG - Motor brand: Mitsubishi - Transport dimensions: 2680mm x 1290mm x 2590mm (l x w x h) - Transport weight [kg]: 4300kg Rjdjyttqhepfx Airjch - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, operating hours: 1,061 h, Type of fuel: Diesel Year of manufacture: 1989 Colour: Yellow Rodpfsyu Ip Uox Airoch Operating hours: 1.061 Empty weight: 3.840 kg Dimensions (LxBxH): 260 x 113 x 215 cm Lifting capacity: 2.500 kg Lift height: 325 cm Fork dimensions: 1.290 x 1.020 mm - Year: 1989 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: A177B3548K - Operating hours: 1061 - Lifting capacity: 2500kg - Lifting height: 3250mm - Overhead clearance: 2130mm - Free lift: 0mm - Fork length: 1290mm - Maximum fork width: 1020mm - Minimum fork width: 270mm - Number of wheels: 4 Wheels - Attachment: 3rd valve to fork carriage - Options: Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Isuzu - Transport dimensions: 2600mm x 1130mm x 2150mm (l x w x h) - Transport weight [kg]: 3840kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, operating hours: 12,386 h, lifting height: 3,450 mm, fuel type: electric, mast type: duplex, fork length: 1,400 mm, fork width: 1,250 mm, total height: 2,650 mm, total length: 2,730 mm, total width: 1,450 mm, color: blue, Year of manufacture: 2006 Empty weight: 7.200 kg Lifting capacity: 5.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FN337512 - Operating hours: 12386 - Lifting capacity: 5000kg - Lifting height: 3450mm - Overhead clearance: 2650mm Redjza T Ndopfx Airoch - Free lift: 0mm - Fork length: 1400mm - Maximum fork width: 1250mm - Minimum fork width: 300mm - Number of wheels: 4 Wheels - Attachment: Side-shift, 4th valve to fork carriage - Options: Work lights, Non-marking tires, Full cabin, Heating - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 6 PzS 930 - └ Capacity: 930Ah - └ Battery voltage: 80V - └ Battery test result: 72% - Transport dimensions: 2730mm x 1450mm x 2650mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, operating hours: 11,070 h, lifting height: 4,450 mm, fuel type: diesel, mast type: duplex, fork length: 1,195 mm, fork width: 1,800 mm, total height: 3,040 mm, total length: 3,200 mm, total width: 2,000 mm, color: red, Year of manufacture: 2006 Empty weight: 7.000 kg Lifting capacity: 5.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394T01696 - Operating hours: 11070 - Lifting capacity: 5000kg - Lifting height: 4450mm - Overhead clearance: 3040mm - Fork length: 1195mm - Maximum fork width: 1800mm - Minimum fork width: 250mm Rodpfozwc Tfox Airech - Number of wheels: 6 Wheels - Attachment: 3rd valve to fork carriage - Options: Joystick, Half cabin, Work lights, Heating, Air tires - Mast: Duplex - Drive: Diesel - Motor brand: VW - Transport dimensions: 3200mm x 2000mm x 3040mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, lifting height: 2,760 mm, fuel type: diesel, General information Year of manufacture: 2024 Weights Empty weight: 3.500 kg Functional Lifting capacity: 200 kg Working height: 1.050 cm Dimensions of cargo space: 616 x 202 x 276 cm Rcjdpfxjwn Hr Ns Aireh Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: France Elévateur Model: Topy 10.2 Year of build: 2024 Condition: Used Data: Gear type: manuell Max. working height: 10,50 m Max. platform height: 8,50 m Max. reach (200 kg): 4,80 m Total dimensions LxWxH: 6,16 x 2,02 x 2,76 m Platform dimensions (outside) LxWxH: 1,00 x 0,75 x 1,11 m Max. basket load: 200 kg Max. Number of people: 2 Swivel range of the upper carriage: 2x 200° Engine: Mercedes Benz Displacement: 1.950 cm³ Performance: 110 kw Colour: weiß Driving license class: B / 3 Own weight: 3.500 kg Special features: insulated work basket, socket in the basket, AdBlue.

Condition: excellent (used), machine/vehicle number: 8FBMT50-13601, operating hours: 95 h, lifting height: 4,700 mm, free lift: 1,610 mm, fuel type: electric, mast type: triplex, battery capacity: 840 Ah, fork length: 1,200 mm, Year of manufacture: 2023 Battery: 840 Ah, Year of manufacture 2023 Lifting capacity: 5.000 kg Rodpsz Rt Eqefx Airjch Maximum passing height: 253 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Fork carriage: Sideshifter Please contact Karl Leitner for more information = Additional options and accessories = - Free lift