Used Carriage for sale (1,903)

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Predpfx Aszw Dgmjbpea Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: as good as new (ex-display), Three-row sliding conveyor for boards. Material is fed from a sorting table. Prjdpfozn I N Tjx Abpoa Length: 2.4 m Height: 700 mm Width: 2.2 m Distance between chains: 1 m, with the option to mount additional chains every 0.5 m.

Condition: used, functionality: fully functional, Year of construction: 2002, fuel type: gas, Forklift Hyster H 7.00 XL Year of manufacture: 2002 Operating hours: 7432 Overall height: 3.25 m Psdoyvvuiopfx Abpera Lifting height: 4.4 m Fork carriage width: 2 m Full cab with heating Free auxiliary hydraulics With sideshift Forks 1.2 m and new forks 2.4 m

Condition: used, Fork carriage with hydraulic side shift + long forks, suitable for STILL model EFG 3.0/6004 Prjdpfxoztvuzo Abpea Technical data: - Fork carriage width: 1,100 mm - Fork length: 1,900 mm - Fork cross-section: 100 x 45 mm

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Prodpfx Aozumxmsbpea Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Condition: used, Year of construction: 2006, operating hours: 11,070 h, lifting height: 4,450 mm, fuel type: diesel, mast type: duplex, fork length: 1,195 mm, fork width: 1,800 mm, total height: 3,040 mm, total length: 3,200 mm, total width: 2,000 mm, color: red, Empty weight: 7.000 kg Lifting capacity: 5.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394T01696 - Operating hours: 11070 - Lifting capacity: 5000kg - Lifting height: 4450mm - Overhead clearance: 3040mm - Fork length: 1195mm - Maximum fork width: 1800mm - Minimum fork width: 250mm - Number of wheels: 6 Wheels - Attachment: 3rd valve to fork carriage - Options: Joystick, Heating, Air tires, Half cabin, Work lights - Mast: Duplex - Drive: Diesel Pedszwc Tfjpfx Abpora - Motor brand: VW - Transport dimensions: 3200mm x 2000mm x 3040mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, forklift -Fork carriage: with forks -Load capacity: 12,000 kg -Make: Still -Forks: length 1600 mm / 200 x 100 mm -Installation dimensions: see photos Predpfju Inqfjx Abpsa -Dimensions total: 3000/2100/H1530 mm -Weight: 2480 kg

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. Prsdpfjtqd Najx Abpoa With hydraulic feed. Also suitable for feeding drying kilns etc.

Condition: good (used), Hydraulic clamping trolley Type VS. Track width 790 mm. Trolley height 390 mm. With auxiliary trolley HEH or HKE. Pedexwn Rvepfx Abpera

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 11,989 h, load capacity: 8,000 kg, lifting height: 3,750 mm, load center: 900 mm, fuel type: diesel, mast type: duplex, power: 87 kW (118.29 HP), total height: 3,180 mm, Equipment: air conditioning, cabin, hydraulically sliding cabin, lighting, pallet forks, sideshift, trailer coupling, Diesel forklift LINDE H80D-01/900 Year of manufacture: 2011 According to the hour meter: 11,989 hours 8 tons lifting capacity at 900mm load center 3.37 meters lifting height 3.18 meters mast height 3.37 meters overhead guard height 2.20 meters fork carriage width 2.60 meters fork length 87 kW Deutz 6-cylinder engine Podpfxezrnf Ns Abpsra - FULLY EQUIPPED!! - Fork adjustment - Side shifter - Dual tires - Elevated special cabin - Cabin with hydraulic tilt - Reversing device - Rearview camera - Air conditioning - Radio - and much more... Immediately ready for use! Original paint! Selling price: 19,900,-- net Delivery also possible!

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm Predpfxelimtce Abpea coil weight: 15 t stroke: 600 mm year: unknown / overhauled in 2017

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,300 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, Equipment: CE marking, saw blade guard, - Made in Austria - Year of manufacture: 2004 - X-Roll carriage guidance system - DTR and CE operating manual - Digital display for the parallel guide TECHNICAL SPECIFICATIONS: Pjdpfszinkysx Abpsra - Carriage length: 2800 mm - Cutting width from the right side: 1300 mm - Blade diameter: max. 315 mm - Scorer diameter: 120 mm - Main motor: 4 kW - Scorer motor: 0.75 kW - Height adjustment motor: 0.5 kW - Electric height adjustment - Manual angle adjustment: 0° - 45° - Three types of blade rotational speed - Max. cutting height: 104 mm - Option to install a cutter: thickness: 6 - 20 mm - Max. diameter: 250 mm - Ratchet - Movable guard - Nozzle diameter: 80 and 120 mm - Dimensions (L/W/H): 320 / 210 / 170 cm - Weight: ~ 950 kg

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet Pedjzt Twyspfx Abpora US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Prjdpfx Aszwmztebpea Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm coil weight: 15 t Pedpfxjinupvs Abpora stroke: 600 mm year: unknown / overhauled in 2017

Condition: excellent (used), Year of construction: 2002, coil weight: 25,000 kg, coil width: 1,550 mm, sheet thickness (max.): 4 mm, strip width: max. 1.550 mm strip thickness: 0,4 - 4 mm coil weight: 25 t mandrel Ø: 508/610 mm coil OD: max. 2.000 mm Pjdpfx Asy Nxn Esbpjra speed: max. 135 m/min working direction: left-> right

Condition: used, Year of construction: 2017, operating hours: 2,976 h, load capacity: 2,000 kg, fuel type: diesel, construction height: 3,000 mm, gearing type: automatic, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: Moffett piggyback forklift M4-20.3 Manufactured in calendar week 38/2008 2,976 operating hours Refurbished in 2025/2026 Load capacity 2,000 kg Duplex mast Prodpfjzwruxox Abpoa Lifting height 3,000 mm Overall height 2,000 mm Load center 600 Fork carriage FEMIA Fork length 1,100 mm, extendable Fork width 1,830 mm, adjustable left and right, adjustment range 1,600 - 2,800 mm Self-weight 1,772 kg Engine Kubota D1105 19 kW 2 work lights at the front, 1 rotating beacon, gantry and lighting renewed in 2026 All hoses renewed in 2026 3rd and 4th valve Roof protection Road approval Price: €10,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €10,000 is the Ludwigslust District Court; for disputes exceeding this amount, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Year of construction: 2017, condition: used, functionality: fully functional, Pallet transfer carriage on rail and via trailing cable Pedpfovu Uq Uox Abpora

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: DN1771/1789/1791, 1x Abus VS column-mounted slewing crane, capacity 500 KG There are 3 identical cranes available. Load capacity at full outreach: 500 KG / 0.5 tons Height: approx. 3.6m Upper carriage outreach: approx. 3.42m Outreach: approx. 2.5m Hook height: approx. 3m Total weight: approx. 350 Kg Includes Abus chain hoist with floor control (2 lifting speeds) with slewing and trolley drive Connection to 400V 16A, slewing range 360° Crane is disassembled and immediately available. The gripper is not included! Item location is 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Very good condition, see pictures. Prjdpfxjzv Hy Ts Abpea Shipping via freight forwarder or collection by arrangement.

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Fork carriage ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Prsdpfow Erlcjx Abpsa Description: ISO 3A (51 cm), capacity 5,000 kg, width 1,350 mm. To enlarge the width of the original fork carriage, can also be supplied to increase the lost load centre and as an adapter fork carriage between the forklift truck and other attachments. ID OS1670

Condition: used, Year of construction: 2003, Machine no.: 675157 Max. weight: approx. 3,500 kg (approx. 4,300 kg incl. packaging) Supply/working voltage: 3x400 V, 50 Hz Control voltage: 24 V Nominal current: 20.5 A Main fuse: 25 A (T) CNC control: GE Fanuc Series 21i-T Grinding wheel speed indicator: make EWL, type 4444 Max. peripheral grinding wheel speed: 30 m/s (ø300 mm/12"), 40 m/s (ø400 mm/16"), 45 m/s (ø450 mm/18") Grinding head drive power: 5.0 kW Grinding wheel head R (left-mounted wheel): approx. ø450 x 80 mm Grinding wheel head RS (right-mounted wheel): approx. ø450 x 80 mm Grinding wheel head UR: left standard approx. ø400 x 63 mm, left max. (option) approx. ø400 x 80 mm, right additional max. (option) approx. ø300 x 40 mm; internal grinding attachment bore approx. ø80 mm Sub-table (Z-axis): distance between centers approx. 1000 mm, max. travel approx. 1150 mm, max. speed 12 m/min, resolution approx. 0.1 µm Top table swivel range (at 1000 mm centers): 0 to +6° (0 to +9° with workpiece length under approx. 800 mm) Grinding carriage (X-axis): max. travel approx. 320 mm, max. speed 6 m/min, resolution approx. 0.1 µm Psdpfx Abozwf R Topjra Pneumatics: min. connection pressure 6 bar, air consumption approx. 2.5 m³/h Drive motors: X-axis slide 2000 rpm/0.3 kW; grinding spindle (R/UR, ø400 mm wheel) 800-1900 rpm [40-95 Hz]/5.0 kW; sub-table (Z-axis) 2000 rpm/0.3 kW; workpiece headstock 2000 rpm/1.0 kW; automatic indexing (UR machine) 3000 rpm/0.5 kW; lubrication/hydraulic pump 1500 rpm [50 Hz]/0.12 kW or 1800 rpm [60 Hz]/0.15 kW Noise emission: equivalent continuous sound pressure level approx. 70 dB(A) Ambient conditions: max. room temperature +40°C, max. humidity 75% Data Coolant Filtration Unit Max. connection pressure: 3 bar / 1 bar (two circuits) Max. flow rate: 80 l/min / 160 l/min (corresponding to the two circuits)

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total Prsdotpkv Aspfx Abpoa

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Pedpozw E E Djfx Abpsra Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Psdszvhlkopfx Abpsra Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: refurbished (used), Year of construction: 1992, turning diameter over cross slide: 800 mm, turning length: 3,100 mm, turning diameter: 550 mm, spindle speed (max.): 350 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 3,000 mm, Very clean Heid S500 CNC Lathe with closed slide. Diameter 800mm over slide Prodpfxszl H Tls Abpoa Diameter 550mm over carriage Total turning length capacity 3100mm In 2018, the CNC unit was completely replaced, and a Fagor 3-axis control system was installed. The machine is in working condition and can be seen in operation.