Used Charmilles Robofil 240 for sale (74)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10,615 h, functionality: fully functional, machine/vehicle number: 108.007.00.0065, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, table load: 2,000 kg, spindle speed (max.): 10,000 rpm, The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time, between December 1, 2025 and December 5, 2025! Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm TECHNICAL DETAILS Work Areas Travel X-axis: 1,600 mm Travel Y-axis: 900 mm Travel Z-axis: 800 mm Feed Drive Feed rate X-axis: 14 m/min Feed rate Y-axis: 14 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 20 m/min Work Table Table dimensions: 1,700 x 850 mm Maximum table load: 2,000 kg Number of T-slots: 7 T-slot spacing: 100 mm Distance spindle nose–work table: min. 100 mm / max. 900 mm Spindle speed: max. 10,000 rpm Tool holder: ISO 40 Number of magazine slots: 30 Iasdpjxnkqaefx Adwsl Max. tool diameter without adjacent free spaces: 85 mm Max. tool diameter with adjacent free spaces: 150 mm Max. tool length: 305 mm Max. tool weight: 6 kg MACHINE DETAILS Control: HEIDENHAIN TNC 620 Dimensions & Weight Dimensions (L x W x H): 4,600 x 3,900 x 3,300 mm Weight: 16,000 kg Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm However, the height can be reduced to 2,900 mm. Coolant system Capacity: 540 l Operating Hours Spindle hours: 10,615 h Power-on hours: 30,204 h EQUIPMENT 3D probe Technical documentation

Condition: excellent (used), Year of construction: 1996, General Characteristics Total weight: 5,000 kg Maximum height: 2,900 mm Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Positioning resolution: 0.001 mm Min/max traverse speed XYZ: 0/900 mm/min Standard glass optical scale Work Tank Dimensions (LxWxH): 1,500x1,000x600 mm Table dimensions: 1,200x800 mm Maximum distance between table and electrode holder spindle: 230/730 mm Table-to-floor distance: 750 mm Electrode Electrode weight on Z-axis: - Interface system: 350 kg - With C-axis and spindle: 50 kg Workpiece Maximum workpiece weight on table: 4,200 kg Maximum workpiece dimensions: 1,450x950x500 mm Dielectric Tank Capacity: 1,600 l Filtration system: paper filter Work tank capacity: 1,050 l Generator Maximum working current (peak): 128 A Pulse type: ISOPULSE Machine equipped with: • Multifunction remote control • Measuring cycles • Contouring Iodoxwmbtopfx Adwoal • PROGRAM EXPERT 2 • PILOT EXPERT 2 • SPAC generator Year of manufacture: 1996

Condition: like new (used), Year of construction: 2017, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Iaodpfxoi A I Hfj Adwsl Very little working hours. The machine is like new. There are two identical machines.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 667007, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller model: Windows Pentium, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 450 mm Resolution: 0.0001 mm Iasdpsv Tnm Hofx Adwel Tank size: 1,220 x 870 x 470 mm Working area Table dimensions: 750 × 600 mm T-slot dimensions (number): 12 mm (5 pieces) Distance between table and fixture: 150 - 600 mm Electrode and workpiece Max. electrode weight: 100 kg Max. workpiece weight: 1,600 kg Max. workpiece dimensions (W × D × H): 1,200 × 850 × 400 mm Dielectric Filter type: 8 integrated paper cartridges Tank capacity: 820 l Dielectric level: 145 - 440 mm (programmable) Container type: Lowerable tank Surface roughness: 0.20 µm Ra MACHINE DETAILS Weight: 4,400 kg Operating voltage: 400 V Installation dimensions: approx. 3,720 x 5,100 x 3,000 mm

Condition: used, Year of construction: 2003, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 300 mm table size X: 500 mm table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 530 mm max. workpiece size Z: 300 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg Iedpevyzf Njfx Adwjal electrode changer: 4 - time generator: 64 Ampere drop tank control Charmilles

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes TECHNICAL DETAILS Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Weight of electrodes: max. 20 kg Weight of workpieces: max. 40 kg Iedpfxjn Arnxo Adweal Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm work table: 500 x 400 mm T-slots: 3 x 12 mm distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Condition: used, Year of construction: 2012, x-axis 350 mm y-axis 250 mm z-axis 256 mm U-axis +/-70 mm Iodpjwtr Dzofx Adwsal V-axis +/-70 mm dimension of workpiece 750 x 550 x 256 mm Working hours 29.559 h -edm hours 29559h

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Iajdjtylpcspfx Adwjl

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 350 Year of manufacture 2004 Iajdpfx Aewxwm Eodwel C-frame design Fixed table with retractable tank Travel: X=350 mm, Y=250 mm, Z=350 mm Max. workpiece size: X=780 mm, Y=530 mm, Z=300 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Distance table - chuck: 150 - 450 mm Working current 64 Amps Best achievable surface finish Ra 0.1 µm Integrated Accura C-axis Linear glass scales with 0.05 µm measuring resolution Incl. pneumatic chuck Erowa ITS 50 Incl. 16-fold rotary electrode changer Machine weight (net): 2800 kg Machine dimensions (L x W x H): 1900 x 1690 x 2522 mm The machine will be cleaned, serviced, and subsequently tested after receipt of order. We are also happy to commission the machine for you.

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R Iajdpfx Adjr Hnglowjl 12 compartment

Year of construction: 2011, condition: good (used), Additional equipement not included. Iajdpfx Aepxnwzjdwel

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Ijdsw Hxzmjpfx Adwsal

Condition: reconditioned (used), Year of construction: 2007, operating hours: 16,730 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 275 mm, total width: 300 mm, total length: 300 mm, table width: 750 mm, Charmilles FO550S. 16-position rotary tool changer. Erowa ITS50 chuck. Machine currently being serviced at our premises in Semsales, Switzerland. Inspection possible upon request. Further information available on request. Isdpfx Adjxmidpjwoal

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Isdpfx Ajtylpijdwjal

Year of construction: 1985, condition: good (used), Beckslide travel; 240 mm Quill travel; 100 mm Ijdpfxsdy Dw Ej Adweal Table dimensione; 350x230 mm Longitudinal travel (x); 200mm Transverse travel (y); 120 mm Table load maximum; 100 kg Work tank dimensions; 520x350 mm Dielectric reservcircapacity; 68 l Hydraulic tank capacity; 5,6 l Dielectric pump flow 140l/min Weigt of generator P25 -125 kg Power requirements; Machine 1kVA Generator 2,2kVA Hydraulique pump pressure; 20 bars Weight with storage tank; 460 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 537 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 650 mm, travel distance Z-axis: 200 mm, total height: 2,215 mm, total length: 2,820 mm, total width: 1,700 mm, wire diameter (max.): 0.2 mm, workpiece height (max.): 510 mm, workpiece width (max.): 510 mm, workpiece length (max.): 510 mm, type of input current: three-phase, overall weight: 3,220 kg, empty load weight: 3,320 kg, feed length X-axis: 650 mm, feed length Z-axis: 200 mm, feed rate X-axis: 240 m/min, feed rate Z-axis: 240 m/min, table load: 500 kg, input voltage: 400 V, working range: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, tank capacity: 930 l, cutting speed: 240 mm/min, travel speed (max.): 240 mm/min, input frequency: 50 Hz, input current: 11 A, Equipment: documentation/manual, 2021 Agie Charmilles CUT AM 500 Wire EDM Machine Iaedpfextfwxsx Adwel Discover premium Swiss precision with this 2021 Agie Charmilles CUT AM 500 CNC Wire EDM Machine This high-performance wire EDM machine has only 537 erosion hours and comes from a medical device manufacturing environment, ensuring meticulous maintenance and minimal wear. Ideal for high-precision applications in medical, aerospace, automotive, and mold-making industries. Machine Overview Make/Model: Agie Charmilles CUT AM 500 Machine Type: CNC Wire EDM Machine Year: 2021 Control System: GF Control Erosion Hours: 537 hrs Condition: Very Good – ready for immediate operation Technical Specifications Work Area Max. part dimensions: 510 x 510 x 510 mm Max. part weight (base + parts): 500 kg Dielectric level (min/max): 250–305 mm Performance Max. machining speed: 240 mm²/min Surface roughness (Ra):

Condition: excellent (used), Year 1998 Table size 397 x 300 mm Longitudinal movement 300 mm Transverse movement 250 mm Vertical movement 250 mm Tool changer 4 EROWA holder Magnetic plane, 405 x 200 mm Iaedpfx Adovzk Nmjwol Cooling water system

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Filters and resin cartridges available Iodpfx Adeha U I Djweal Please ask if you are interested !

Condition: refurbished (used), Year of construction: 1998, operating hours: 20,800 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Machine currently undergoing revision at our facility in Semsales, Switzerland. Erowa ITS50 chuck. 16-position rotary tool changer, double gripper. Flat LCD screen. Retractable work tray. Inspection possible upon request. More details available on request. Iedpfx Aoxlhudsdwoal

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Iedpou Ilbusfx Adwjal

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] Iaodpfxswl Rh No Adwsl - C axis : 0 - 100 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] - Machine height : 2.680 [mm] - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT - CNC : AGIEVISION 5 - Workpiece loading / unloading robot - Spindle nose : EROWA - Dielectric capacity : 600 [l]

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Ijdpfx Adowzifxoweal

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, table width: 400 mm, table length: 600 mm, TECHNICAL DETAILS Travel paths of axes X / Y / Z: 400 x 300 x 350 mm Positioning speed of axes X / Y / Z: 6 / 6 / 15 m/min Positioning speed in manual mode of axes X / Y / Z: 2 m/min Acceleration of axis Z: 10.0 m/s² Resolution of axes X / Y / Z: 0.1 µm Laser correction of axes X / Y / Z: linearity / angle / spindle pitch Integrated C-axis Max. electrode weight: 50 kg Rotational speed: 0 -100 g/min Max. mass moment of inertia: 5,000 kg cm² Max. working current: 140 A (in rotation mode) Max. working current: 140 A (static) Positioning accuracy according to ISO 230-2: 0.007° Resolution: 0.0005° Dielectric unit Capacity: 490 l Filter type: 4 cartridges Cooling system: Heat exchanger dielectric / water Temperature control: ±1 °C automatic Generator Generator type: ISPG (Intelligent Speed Power Generator) Pulse current: 80 A Best surface roughness Ra: 0.1 µm IQ module (graphite, copper): integrated Control Operating system: Windows XP Data input: 15" LCD screen, mouse or touchscreen, keyboard and remote control User interface: Vision 5 Work area Clamping plate with hole pattern: Hole spacing 50 mm Iaodpfx Aovuqmfjdwjl Distance table - chuck: 170 - 520 mm Distance floor - clamping level: 1,000 mm Max. table size: 600 x 400 mm Max. work basin dimensions: 900 x 630 x 350 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Bath level: 0–290 mm Compressed air Pressure: 6 - 8 bar Average consumption: 100 ± 10 % m³/h Max. consumption: 270 l/min at a pressure of 6 bar while filling the work tank (duration approx. 40 s) Connection: hose coupling Ø 13 mm Cooling water Temperature: room temperature - 7 °C Quantity: approx. 20 l/min Pressure: 1.5–3 bar Cooling and environment Heat exchanger for control cabinet: integrated Heat exchanger for dielectric: integrated Ambient temperature: recommended 20 °C - 25 °C MACHINES DETAILS Machine dimensions: 2,460 x 1,410 x 2,600 mm Dimensions with electrode changer: 2,460 x 2,100 x 2,600 mm Dimensions with pallet changer: 2,460 x 2,630 x 2,600 mm Weight Total weight: 3,830 kg Dielectric weight: 400 kg EQUIPMENT 1 heat exchanger for control cabinet, integrated. 1 heat exchanger for dielectric, integrated.

Condition: good (used), Year of construction: 2004,   Chuck type: EROWA Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Ijdswtzdwspfx Adwsal Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.