Used Chiller for sale (912)

Condition: new, Viessmann Tecto RF WMC3 1450 Refrigeration Unit The Viessmann Tecto RF WMC3 1450 (also known under the series designation TectoRefrigo) is a state-of-the-art, plug-and-play, piggyback refrigeration unit for wall mounting in cold storage rooms for standard cooling applications. Technical Data • Manufacturer: Viessmann Refrigeration Solutions • Model Designation: Tecto RF WMC3 1450 (Size 2) • Equipment Type: Plug-and-play piggyback refrigeration unit (monoblock) for wall mounting • Integrated Bluetooth connectivity (for control via app and data tracking) • Automatic leakage detection • Pre-installed connection cables: 2.5 m for door contact switch and 5 m Modbus-RTU cable (for building automation system / BMS). • Application area: Standard cooling • Housing surface: Powder-coated, similar to RAL 9003 (signal white) • Cooling capacity at L0L32 (0 °C chamber / 32 °C ambient): 1450 watts • Cooling capacity at L0L43 (0 °C chamber / 43 °C ambient): 1270 watts • Control range for cold storage room: -5 °C to +10 °C • For cold storage room volume: Up to approx. 11.1 m³ to 15 m³ (depending on the selected insulation, goods, and set temperature) • Airflow (evaporator): 1000 m³/h • Permissible ambient temperature: +5 °C to +43 °C (indoor operation only) • Refrigerant: R290 (propane) – an environmentally friendly, natural refrigerant with a very low global warming potential (GWP 3) • Refrigerant charge: < 150 g • Global Warming Potential (GWP): 3 • CO₂ equivalent: < 0.45 t • Defrosting: Automatic hot gas defrosting with demand-controlled cycle control • Condensate: Automatic, integrated condensate evaporation • Maximum permissible wall thickness: 150 mm (for the mounting cutout) • Power connection: 230 V / 50 Hz (AC via CEE plug, blue, power consumption approx. 990 W) • Power consumption (nominal current): 5.4 A • Sound pressure level: 32.8 dB • Dimensions: 828 mm x 671 mm x 976 mm (H x W x D) • Weight: 64 kg (net) Dimensions for the wall cutout • Width of the cutout: 575 mm • Height of the cutout: 395 mm Key features • Piggyback design: The monoblock unit is simply hung into the corresponding cutout in the cold storage room wall (“piggyback”). The maximum wall thickness may be 150 mm. • Hot gas defrosting: The unit has an automatic, demand-controlled hot gas defrosting system with integrated condensate evaporation, so that a separate drain is usually not necessary. • Smart electronics: Equipped with modern control, Bluetooth connectivity (for app control and data tracking), and automatic leakage detection. • Components: Thermostatic expansion valve, pressure sensors, and efficient, internally finned heat exchangers. Important application notes • Ambient temperature: The device is designed exclusively for operation in closed rooms with an ambient temperature of +5 °C to +43 °C. It does not have a winter control system and is not weatherproof (no outdoor installation). • Accessories for Viessmann cells: If the WMC3 unit is mounted on a classic Viessmann cold storage room, a special adapter cable and a converter box are usually required to connect the door contact switch and the power supply correctly. “Everything from one source: We would be happy to offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request! Tsdpfx Aj Aa Rlroirsd

Condition: reconditioned (used), Year of construction: 2005, The refrigeration machine from "ers" is for sale; the device has been checked for functionality in a specialist workshop. Tjdpfxewb Sl Is Aired

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Todoxvca Aspfx Aired Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: like new (used), Year of construction: 2004, functionality: fully functional, type of input current: three-phase, type of cooling: air, overall weight: 650 kg, ambient temperature (max.): 48 °C, ambient temperature (min.): 16 °C, input voltage: 400 V, total width: 917 mm, total length: 1,615 mm, total height: 1,636 mm, warranty duration: 3 months, Chilled water unit KRAUS – made in Germany!!! Although the unit was connected to the production line, it appears to be unused. The seller informed me that the chiller was connected to the cooling system of the pharmaceutical production line. It was not used for regular operation but served as a backup in case of failure. Manufacturer: KKT Kraus – Kraus Klimatechnik GMBH. Technical data: (also available in the photos). Model: KPC 115-L-S Cooling capacity: 28 kW Tedpfx Aiszlaz Ajrjd Maximum power consumption: 13.4 kW Number of circuits: 1 Number of fans: 2 Noise level: 65 dB Power supply: 380-415 V / 3 / 50 Hz (currently with a 5x32A plug). Year of manufacture: 2004. The unit was stored in a closed room and shows absolutely no signs of corrosion. The unit was installed in the production line as a backup for pharmaceutical production; it was required but appears not to have been used in regular operation.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 2200390951, TAEevo Tech 081 Special are compact water cooling units suitable for outdoor installation. Includes crankcase heater, phase monitoring, buffer tank, and a large, integrated P3 environmental pump. Special equipment: Color – RAL 9003 Potential-free signal on terminal as follows: - Cooling On/Off - Main switch On/Off - Collective alarm signal Cooling capacity 23.6 kW Cold water, outlet/inlet: 7 / 12°C Volume flow rate 4.04 m³/h Todpfx Aeztpn Ijirod Ambient temperature 32°C Refrigerant R 410A Electrical data: Voltage 400V, Frequency 50Hz, 3 phases Maximum power consumption 12.04 kW Maximum current 20.2 A Starting current 113.37 A Protection class IP54

Condition: good (used), Year of construction: 1987, E.BACHILLER stainless steel nutsche filter dryer, 0.4 m². Year: 1987. Todpey Hfx Eofx Airod Hydraulic power unit with 7.5 hp motor, 1410 rpm, 50 Hz, 220 V. No documentation available.

Condition: new, Year of construction: 2026, CW-3000 Water Chiller for CO₂ Laser Engravers and Cutting Plotters The CW-3000 is a compact water cooling system designed for CO₂ laser engravers and cutting plotters, suitable for laser tubes with a power rating of approximately up to 80 W. It maintains a stable coolant temperature, protecting the laser source against overheating and power fluctuations. It is a simple and effective solution for achieving consistent cutting and engraving quality while reducing the risk of production downtime. The unit uses an efficient fan and heat exchanger system, making it lightweight, space-saving, and easy to integrate into existing cooling installations. Why CW-3000 improves process safety and quality Protection of laser components – stable cooling reduces temperature fluctuations inside the laser tube and minimizes the risk of thermal overload of the entire system (tube, power supply, connectors, and water circulation circuit). This ensures safer and more predictable operation. Extended CO₂ laser tube lifespan – maintaining the recommended operating temperature range helps preserve output parameters for longer and delays the need for tube replacement. Improved cutting and engraving quality – stable temperature means stable laser beam power, helping achieve consistent results, cleaner edges, and fewer corrections. Continuous production operation – reduced risk of thermal alarms and cooling-related interruptions ensures a more predictable workflow. Cost-effective operation – simple construction, compact dimensions, and low power consumption make daily operation easier and help reduce maintenance costs. Applications The CW-3000 cooling system is designed for: CO₂ laser plotters and engravers used in light and medium-duty applications where repeatable quality and low operating costs are important. Advertising workshops, prototyping studios, and small production facilities where reliable cooling is required with limited installation space. Recommended operating practices Use clean coolant and regularly check the fluid level; ensure the circulation system remains unobstructed and all connections are leak-free. Provide sufficient airflow around the heat exchanger and cooling fan. Periodically clean the filter and reservoir and check the coolant flow to maintain efficiency and protect system components. Technical specifications Parameter Value Power supply 230 V Current consumption 0.45 A Cooling capacity 50 W/°C Tank capacity 9 L Connections (inlet / outlet) 10 mm Todpey Sg H Ijfx Aired Maximum operating height 10 m Maximum flow rate 10 L/min Weight 9.5 kg Dimensions (L × W × H) 49 × 27 × 38 cm

Condition: used, Year of construction: 2022, operating hours: 12,345 h, functionality: fully functional, machine/vehicle number: 2211006105620961, cooling capacity: 148.1 kW (201.36 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,760 kg, ambient temperature (max.): 48 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 45 bar, temperature: 7 °C, volume flow: 25.5 m³/h, total width: 1,100 mm, total length: 4,330 mm, total height: 1,875 mm, power: 52.6 kW (71.52 HP), input current: 191 A, operating pressure: 45 bar, noise level: 53 dB, empty load weight: 1,760 kg, Equipment: cooling unit, type plate available, AERMEC NRK0700 H A 01 industrial air-to-water heat pump / reversible chiller. Quantity available: 2 units. Year of manufacture: 2022. Condition: used, dismantled / disconnected, available immediately. Location: Latvia. Technical data: Cooling capacity: 148.1 kW Heating capacity: 174.4 kW Refrigerant: R410A Power supply: 400V / 3Ph / 50Hz Input current according to nameplate: 191 A Starting current according to nameplate: approx. 282 A Max pressure HP/LP: 45 / 30 bar Water flow rate: approx. 25.5 m³/h Sound pressure level: 53 dB(A) at 10 m Protection class: IPX4 Dimensions: 4330 x 1100 x 1875 mm Approx. empty weight: 1760 kg Hydronic kit: 01 – storage tank with low head pump Tedpfx Aoy Ndqleirsd The units can be sold together or separately. Inspection is possible by prior agreement. Loading can be arranged.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,579 h, functionality: fully functional, input voltage: 380 V, We are offering this well-maintained JUKI GKG-GL, KE2070, KE2080, RS800N + Chiller SMT placement line, year of manufacture 2013. The line has low operating hours and was used exclusively for our own products. We are not a service provider; only single-shift operation. The line has been serviced annually by JUKI and is in excellent condition. KE2070 operating hours: 5751 h KE2080 operating hours: 2579 h Due to circumstances, sale only as a complete line, no cherry-picking. Loader and unloader are included, but not the ones shown in the video – instead, units from Rommel will be supplied. Manufacturer: JUKI Model: GKG-GL, KE2070 (5751h), KE2080 (2579h), RS800N + Chiller Year of manufacture: 2013 Machine type: SMT placement line Available from the end of July 2026. Tjdsy Axcvjpfx Aired We are happy to assist with dismantling and loading by a local specialist company. If you have any questions or need further information, please do not hesitate to contact us by message or phone.

Condition: used, Liquid chiller, cooling unit, Used machine Manufacturer: Hoffmann Type: ERK 360-H Overall dimensions: Width: 2200 mm Depth: 1000 mm Height: 2450 mm Year of manufacture: 1996 Tsdpfx Ajyzywljirjd Cooling capacity: 36,000 kcal/h Refrigerant: R134A – 20 kg Max. operating pressure: 17 bar Electrical data: 400V; 17 kW

Condition: excellent (used), Year of construction: 2017, operating hours: 5,800 h, functionality: fully functional, cooling capacity: 160 kW (217.54 HP), type of cooling: air, power: 260 kW (353.50 HP), heating capacity: 160 kW (217.54 HP), aircooled Multipipe Chiller Trane CMAB HSE 185 cooling and heating in the same time Cooling cap.160 KW (47 refr.tons), Heating 160KW (47 refr.tons) 2 circuits with 4 scroll compressors,inverter driven Plate evaporator, with integrated 2 pumps Tjdpfewy Dn Sox Airsd R 410a, low hours tested,ready for operation

Condition: used, Chiller DencoHappel -Type: GACP050FD1 -Max. cooling capacity for R407C: 60 kW -Max. power consumption: 27.3 L -With heat pump -Year of production: 2017 -Number of fans: 2 x 650 mm -Dimensions: 2320 x 770 x 168 mm -Weight: 596 kg Tedpfx Aisxg N Arored -Condition: used in very good condition, ready to work

Condition: used, Radiator with fan Tsdpfx Aexk Epvjired Manufacturer: LÄNGERER & REICH Fan: ZIEHL ABEGG LR No. 7.1438 / 2.07 Maximum permissible operating overpressure: 0.6 bar Maximum permissible operating temperature: 95 °C Tank capacity: 40 l

Condition: ready for operation (used), Liquid chiller, Oil chiller, Neslab, used machine Manufacturer : Neslab Type : CFT300 Overall dimensions : 640 x 900 x 1090 mm Electrical data : 400 V, 50 Hz, 10 A Refrigerant : R22 Tsdpfxoyvfrco Airod Cooling capacity : 10.6 kW Adjustable temperature range : 5–35 °C Water flow rate : 75.7 l/min

Condition: new, Year of construction: 2025, The device has 2 cooling systems: - Laser head cooling system - Laser source cooling system Chiller designed for lasers up to 1500 W Designed for cooling tubes in laser plotters thanks to the use of a cooling unit. The chiller maintains the correct working temperature of the laser source, ensuring constant cutting or engraving quality throughout its use. Technical parameters Tank capacity 15L Max. water cycle 70L/min Todsv Aipnjpfx Airjd Water head lift 45m Cooling capacity 5.1kW Refrigerant R-410A Pin diameter 1/2" rp Power 220V (+-10%), 50Hz Weight 72kg Dimensions 700x470x890mm

Condition: excellent (used), Year of construction: 2004, overall weight: 500 kg, ATEX air micronizer mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High-efficiency equipment, highly suitable for the micronization of all types of powder products. Includes bag filter reference C9905. Tjdpfexpx Agsx Airjd

Condition: ready for operation (used), KLH Kältetechnik W15.HL6 Peripheral Unit Air-Cooled Water Chiller Cooling Device Year of manufacture: 2010 Dimensions: 1100mm x 800mm x 1620mm (L x W x H) Weight: 288 kg You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Tsdpfx Aioxxa Hrjrsd Visit our shop and have a look at our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data deviations as well as errors in the item description may occur and are reserved.

Condition: refurbished (used), Year of construction: 2013, The unit is equipped with scroll compressors. The refrigerant is R410A. Cooling capacity is approx. 600kW kW at water parameters +12/7°C and ambient temperature +35°C. The chiller is not equipped with a hydraulic module (no pump or tank). This unit comes from our rental fleet. Condensers were repaired due to leaks. Transport is not included in the price of the unit. We provide a 3-month warranty (applies to the territory of the Republic of Poland). Tjdpfjgaqn Iox Airsd

Year of construction: 1984, condition: used, Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun -mobile version: -Connection: 1/2 "inch -Cooling unit output: 0.33 kW -Water volume flow: 500 l / h Todpfx Aedz Aq Uoirod -Dimensions: 895/600 / H1020 mm -Weight: 156 kg

Condition: ready for operation (used), Chiller Bitzer Compressors type: CSH8571-110Y (x2) Volume: 410 m3/h (x2) Compressors cooling capacity for R134a: 456 kW at 0°C/40°C, 370 kW at -5°C/40°C, 295 kW at -10°C/40°C Unit was working on R134a Plate heat exchangers, freon tanks Shell and tube heat exchanger Control cabine Dimensions: 4300 x 1650 x 2100 mm Stock status: 2 Condition: Used Tjdpfxjilltuj Airod We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: repair required (used), Year of construction: 2015, This is an used chiller with a nominal cooling capacity ~430kW. R134A refrigerant. This unit has a built-in pump, factory expansion vessel and Bitzer compressor inverter driven technology. Unit comes from our rental machine park. The shell and tube evaporator is completely leaky. Transport not included. Tsdpfsix Adbjx Airsd

Year of construction: 2025, condition: new, Chiller with low GWP refrigerant R32. Cooling capacity according to Eurovent: 37 kW. Integrated pump, internal tank, coaxial evaporator, winter package for operation at ambient temperatures down to -25°C, internal bypass. Also available with other cooling capacities. Tsdpfx Aismhgg Rjrod

Condition: ready for operation (used), Year of construction: 2007, The TAE evo 602/P3 chiller is a compact machine designed for use in industry (but not only), equipped with hermetic scroll compressors, a built-in ~3Bar pump and an innovative finned evaporator mounted inside a hydraulic buffer tank. Refrigerant is R407C. Designed to work in pressure (closed) systems but can works in open type circuits. Capacity ~110kW for +12/7°C and +35°C. We provide 3-month guarantee (concerns the area of Poland). The transport service is not included. Todpfxspuh Aqs Airjd

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. Tedpfxsg Ewwrs Airjd -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2023, The used refrigeration unit uses the low-GWP refrigerant R454B. Refrigeration capacity is 70 kW at 7/12°C and an ambient temperature of 35°C. The unit is equipped with an internal P3 pump and an internal buffer tank with a capacity of 410 liters. The fans have speed control, and an internal bypass is installed. Todpfx Aishmkixsrsd Due to its coaxial evaporator, the unit is ideally suited for process applications.