Used Chip Bucket for sale (5,853)

Condition: used, Tipping container, tipping skip for forklift trucks Chip container – bulk tipping skip – folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry brackets: 230 x 110 mm Fork spacing inside: 160 mm Fork spacing outside: max. 600 mm Ffodjhly Ifspfx Adajw - Fork entry pockets – entry brackets for transport and emptying by forklift or pedestrian pallet truck - Manual tipping mechanism via hand lever - 4 heavy-duty plastic fixed castors Ø 175 mm, 2 of which are swivel castors - Foldable tow bar Dead weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm Very good condition Suitable for collecting, storing and transferring recyclable materials

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. Fodpfx Aoq Nf S Rodasfw 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Ffodpfswck N Isx Adasw Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Fsdpfx Aexpyfvodaefw Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: used, Year of construction: 2021, operating hours: 4,578 h, 2021 | Hitachi ZX250 LCN-7 with 1 excavator bucket | Used Tracked Excavator | 4578 hours 📍Location: Germany Fedpfjytf Aijx Adaofw 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 98000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 61 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Strong engine with no blog by and smoke. Strong batteries. No play on stick and boom pin. However the body wiggles when operating, which may indicate a usage of the slew ring. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40201 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230A Wood Chip and Dust Extractor + 2.5 m Hose Ffjdpfsytn Tdsx Adaow The CORMAK FM230A dust extractor is a high-performance chip extraction fan designed for efficient removal of wood chips, shavings, and wood dust generated during woodworking processes. This compact chip extractor is ideal for carpentry workshops, production facilities, and home workshops where effective dust extraction from workstations is essential. The model is equipped with a flexible extraction hose with a length of 2.5 m, allowing quick connection to woodworking machines such as planers, table saws, milling machines, and thickness planers. Thanks to this, the chip extraction system can be easily positioned anywhere in the workshop, ensuring effective removal of dust and chips directly from the source. The powerful extraction fan generates an airflow of up to 1080 m³/h, ensuring fast and efficient suction of wood chips and dust. The solid construction and metal impeller provide stable operation, high durability, and reliability even during intensive use in a woodworking workshop. The mobile design with transport wheels allows convenient movement of the unit between workstations, while the bag filtration system effectively separates air from wood chips. As a result, the wood dust extraction system helps maintain cleanliness in the workshop and improves both comfort and workplace safety. Key Advantages extraction hose included – 2.5 m Ø100 mm high suction capacity – up to 1080 m³/h efficient fan for chips and wood shavings single-phase motor 0.75 kW / 230 V durable metal impeller mobile construction with transport wheels efficient filtration system for chips and wood dust large waste bag enabling long operating time compact design ideal for woodworking workshops Applications The CORMAK FM230A chip and dust extractor is designed to work with many woodworking machines that require effective dust extraction: jointers and planers thickness planers table saws spindle moulders wood sanders Thanks to the high airflow performance, the dust and chip extractor effectively removes contaminants generated during woodworking, improving visibility at the workstation and reducing the amount of dust in the air. Standard Equipment CORMAK FM230A dust extractor extraction hose Ø100 mm – 2.5 m filter bag waste collection bag mounting clamps mobile base with wheels Technical Specifications Parameter Value Motor power 0.75 kW Power supply 230 V / 50 Hz Extraction capacity 1080 m³/h Motor speed 2800 rpm Vacuum pressure 1000 Pa Noise level 68 dB Number of bags 2 Suction inlet diameter 100 mm Hose length 2.5 m Bag capacity 90 L Height 1800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Radial fan in a galvanized housing with sound insulation -Engine power: 30 kW -Speed: 2920 rpm Fedsb A H Raspfx Adaefw -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Inlet connection: Ø 800 mm -Outlet connection: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Ffodpjr R Ewlofx Adajw Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dimensions Length: 1,200 mm Width: 800 mm Height: 900 mm MACHINE DETAILS Weight: 100 kg EQUIPMENT Forklift attachment Ffsdpfxjyr R Ihs Adajw

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. Ffjdpfxsxp Urwj Adasw CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: used, Year of construction: 2003, 2003 | Eurosteel TH63 Grapple bucket | Used Bucket 📍Location: Belgium 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Fedpfx Adeyfxwdjaefw 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Not tested, hydraulics inoperable 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35101 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, functionality: fully functional, CAT336 General Purpose Bucket Fsdpfxsyki Tgj Adajfw

Condition: reconditioned (used), functionality: fully functional, Bucket Crusher UJ200 All hydraulic parts are revised Ffedjyki Nhopfx Adajw From STOCK Suitable with 20-25-28tons excavator

Condition: used, Year of construction: 2017, operating hours: 8,562 h, 2017 | Hyundai HX300 NL with a bucket | Used Tracked Excavator | 8562 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 52500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 48 approved ✅ 16 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: Well-used excavator, undercarriage needs to be tightened. Hydraulic oil pump makes a grinding noise, hydraulic oil level low, swing brake no longer functioning properly, much play on boom pin, small coolant leakage at vent valve, overpressure system does not build up sufficient pressure, otherwise an operational machine. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39020 Equippo" is commonly used when looking up more details online. Ffsdpsyiy R Hsfx Adaow 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2005, operating hours: 3,600 h, 2005 | JCB 535-140 with forks and loading bucket | Used Telescopic Forklift | 3600 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Ffjdpfsx Ti Udox Adajw 59 inspection points 59 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The unit functioned during inspection recommended full service and filters 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40116 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 1979, condition: not inspected (used), functionality: unexamined, overall weight: 300 kg, rotational speed (max.): 1,000 rpm, machine/vehicle number: 179.041.09, No reserve price – guaranteed sale to the highest bidder! Fsdpfx Asyn Aicsdaofw Placing a bid obliges you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Drum diameter: 400 mm Capacity: 25 l Speed: 1,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 650 x 1,000 mm Weight: 300 kg External reference: Elos - Lot 24

Year of construction: 2019, operating hours: 1,000 h, condition: ready for operation (used), functionality: fully functional, We offer this ready for use Yavuz Makina YM-6 chip planing machine, year of construction 2020. Specifications of YM Chip Machining Machines Machines have a fully steel frame, and the log loading unit is manufactured from high-strength, thick steel material to withstand impacts during loading. The log loading unit is 140 cm long and 60 cm wide. Movement is provided by a gearbox-driven chain system. Each roller reaches a rotational capacity of 3800 revolutions per minute using 7.5 kW (10 HP) motors and a V-belt system. The produced chips are discharged from the machine via a conveyor belt system. The quantity and quality of chips vary depending on the fill level of the log loading unit, the moisture level of the loaded logs, and the part structure. The cutting rollers are designed and manufactured to produce the highest quality chips with high efficiency. The machine is controlled by a control panel independent of the main unit and is equipped with stop buttons for emergency use. These comprehensive features enable our machines to produce chips of the desired quality, quantity, and speed. Drive System : Chain gearbox driven. Log Loading Hopper : Equipped with speed control system, dimensions 1300 mm x 600 mm. Chip Output System : 66 cm wide conveyor belt system. Chassis Structure : Steel construction. Electrical Panel : Operation via a control panel independent of the machine. Cutting System : Roller system with adjustable blade heights. Pneumatic Pressing System : Optionally available for thin and scrap wood pieces. Operating Power : With a 380V electrical connection. Chip Thickness Adjustment : The chip thickness can be adjusted according to the desired use. (Coarse Chips: Horse Bedding, Medium Chips: Chicken Bedding, Fine Chips: Chick Bedding) Log Loading Unit Movement : Provided by a 1” thick chain. Blade Material : HSS (Made in Germany). Bearings : High quality FAG brand. Technical Specifications YM-6 Ffsdpfx Adjypk Rkeasw Number of Rollers 6 Blade Length 60 cm Number of Blades / Total Number of Blades 7 x 6 = 42 Motor Powers (for Rollers) 6 * 7.5 KW = 45 KW (60 HP) Total Motor Power (including Log Hopper and Belt Motor) 55 kW Roller Operating Cycle 3800 rpm Roller Diameter 158 mm Chip Cutting Depth 0.4 mm – 2 mm Maximum Tree Width 50 cm Log Hopper Working Distance 3000 mm Machine Dimensions (including Log Hopper and Motors) Machine Weight 612 x 175 x 164 cm Machine Weight 5400 kg Production Capacity (Average) 1500-2500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, POWER kW 2.2 FREQUENCY Hz 50 SUPPLY VOLTAGE V 400 MAXIMUM VACUUM mbar 30 MAXIMUM AIR FLOW m³/h 1400 NOZZLE DIAMETER ømm 160 Fodsx U D Dcopfx Adaefw

Condition: used, Year of construction: 2019, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Magni Bucket / Manitou Mount / 1,000 kg Capacity / Year of manufacture: 2019 / In stock & available immediately Price: €2,490.00 net / €2,963.10 gross - Capacity (kg): 1,000 - Weight (kg): 420 - Width (mm): 2,400 - Year of manufacture: 2019 Equipment: - incl. Manitou mount At our warehouse, we have a very large selection of various attachments, all immediately available! Mr. Herden (Tel. ...) will be pleased to assist you. Upon request, we are also happy to provide you with a financing offer. We are an official sales and service partner for Westtech. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Holp. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for DMS. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB Construction Equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Subject to errors and prior sale! Internal No.: 007973 = Further information = Usage: Construction Fedpfx Adeytafroaofw Contact Marius Herden for further details.

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz Ffodpsphvl Tjfx Adasw - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Ffjdpfx Aehwt H Ajdaew Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: new, Year of construction: 2025, SCV8900TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive use in woodworking and manufacturing facilities. Thanks to the BIG-BAG system and the automatic VIBER filter cleaning system, the unit ensures continuous operation with minimal maintenance while offering a very large waste capacity. It is a unique solution on the Polish market. Key Advantages BIG-BAG – high-capacity container significantly extending the time between emptying cycles VIBER system – automatic filter shaking system ensuring long-lasting filtration efficiency TC housing – effective acoustic insulation and vibration dampening REHEAT – heat recovery from extracted air, improving the facility’s energy efficiency DAMAGE PROTECT – mechanical impeller protection against hard object intake Exceptional suction system tightness – maximum efficiency and no heat loss during winter Construction and Technology The unit is equipped with a metal, dynamically balanced impeller that guarantees quiet and stable operation while maintaining maximum airflow performance. The chip extraction fan is powered by a reliable 7.5 kW motor. The impeller blade design has been aerodynamically optimized to reduce energy consumption. Precision and Performance With a capacity of 8,900 m³/h and filtration of particles down to 5 microns, the system ensures perfect working conditions even in the most demanding woodworking and industrial applications. The SCV8900TC VIBER BIG-BAG chip extractor allows seamless connection to multiple machines simultaneously, supporting continuous operation. Application The machine is dedicated to professional woodworking shops, carpentry workshops, furniture manufacturers, and large industrial production lines where maintaining clean air is crucial. The central dust extraction system performs perfectly in cooperation with machines such as panel saws, edge banders, sanders, and CNC machining centers. Standard Equipment Polyester filters with 5-micron efficiency Automatic filter cleaning system (VIBER) Built-in REHEAT system BIG-BAG waste collection unit DAMAGE PROTECT system Control cabinet Optional Equipment HEPA filter for finer dust fractions Bin fill level monitoring Fsdpfx Ajup Df Tedajfw Differential pressure sensors Remote control system Technical Specifications Power supply voltage: 400 V Motor power: 7.5 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 45 pcs Filtration area: 23 m² Inlet diameter: 350 mm Capacity: 8,900 m³/h Vacuum pressure: 3000 Pa Air velocity: 32 m/s Noise level: 80 dB Number of BigBags: 1 pc BigBag capacity: 1250 L Dimensions: 2400 × 1100 × 3600 mm Weight: 540 kg

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Fjdpfx Adsyrhd Tsaofw Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: new, Year of construction: 2026, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 Fodpfsvzqtxsx Adajfw DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003 Fsdpfxjiw Eafo Adaofw