Used Chip Bucket for sale (5,851)

Condition: used, Year of construction: 2000, Width: 200 cm Attachment suited for: Construction machines Fpsdpfxsyg Ehxs Adaed Bucket volume: 1.3 m^3

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Fpsdpoxwhw Asfx Adajd Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: new, Year of construction: 2026, Metal Dust, Chips and Shavings Extractor MDC800 230V The MDC800 metal extractor is a professional device designed for effective extraction of chips, shavings and dust generated during metalworking processes. Its high efficiency, robust construction and easy operation make it a reliable piece of equipment for grinding and production workstations requiring constant cleanliness control. Key Advantages of the Machine High extraction efficiency – an airflow of up to 1800 m³/h ensures effective removal of even large volumes of metal chips. Versatile application – ideal as a chip extractor, grinder extractor, polisher extractor or for other metalworking equipment. Compact and stable construction – the rigid housing ensures safe operation and minimizes vibrations. Quick access to the container – makes emptying easier and reduces downtime. Easy filter replacement – quick and convenient access. Construction and Technology The MDC800 is designed for intensive and continuous industrial operation. The robust 0.75 kW motor runs at 2800 rpm, providing a constant and stable airflow. The dual 100 mm suction inlet system allows simultaneous connection of two workstations, significantly increasing work efficiency. The large impeller diameter of 325 mm improves the system’s aerodynamic performance and enables extraction of larger metal chip fractions without the risk of clogging. A spacious collection container ensures long operating cycles without frequent emptying. Precision and Work Efficiency The MDC800 metal chip extractor provides even and stable airflow with both single and dual inlets. The performance of 1800 m³/h (single inlet) and 1520 m³/h (dual inlet) ensures effective capture of contaminants generated during grinding, drilling, milling and other machining operations. Applications The device is ideal as a: extractor for bench and belt grinders, metal chip and shaving extractor in locksmith workshops, Fpodjx E Udhepfx Adaod metal dust extraction system in tool shops, extraction unit for polishing and deburring processes. Standard Equipment large-capacity chip container, replaceable filter, dual suction inlet 2 × 100 mm, stable, compact steel casing. Technical Data Specification Value Motor 0.75 kW, 230V Speed 2800 rpm Suction inlets 2 × 100 mm Airflow (single inlet) 1800 m³/h Airflow (dual inlet) 1520 m³/h Impeller diameter 325 mm Chip bag size 330 × 500 mm Dimensions 580 × 480 × 1016 mm Weight 55 kg

Condition: good (used), Make: Superfoss Type: Automatic contactsealer Capacity: up to 400 an hr Dimensions L x W x H = 1200 x 1100 x 2400mm Fodpfxjfx Tgco Adaspd Frame: Stainless Elecric 380V+E, 4,0Kw Comp.air: >5bar Controlls: Frequentional driven, electronic temperature adjustment touchscreen panel electronic weldingtime adjustment automatic foiltransport Features,gas injection /bucketstoppers Tooling: 250mm as-is or adjusted to customer needs

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Fpedpfx Adsigyp Hjaed Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: good (used), Filling quantity: 35 kg Fjdpfjgl Auxox Adajpd

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, total length: 5,595 mm, total height: 2,031 mm, total width: 680 mm, delivery head: 1,550 mm, ejection height: 1,400 mm, type of input current: three-phase, conveying length: 2,750 mm, input voltage: 380 V, transport height: 450 mm, conveyor belt length: 5,595 mm, input current: 1 A, input frequency: 50 Hz, Deburring conveyor technology for dry operation Type: P-40 Design: Z-shape Chain pitch: 40 mm Conveyor width (standard): 680 mm Container width: 680 mm Loading length: 2,750 mm Loading height: 240 mm Loading area: 2,750 mm Incline angle: 30° Discharge height: 1,550 mm Discharge height above floor: 1,400 mm Discharge length: 450.0 mm Total conveyor length: 6,157 mm Lifting eyes: Yes Inclined section covered: Yes Loading hopper: Yes Covers in loading area: Smooth sheet steel Discharge chute: Yes Fpjdpfjwvgpkex Adaod Discharge chute height: 150 mm Reach-in protection per EN618: Yes, conveyor CE-compliant Castors: Yes Adjustable feet: Yes Drive: Gear motor Drive position: Right side Brand: SEW Power consumption: 0.25 kW Overload protection via limit switch (slip ring)

Condition: used, heavy fire bulkhead with counterweight Fodpevwgdlofx Adaspd used manufactured by Spänex width 1300 mm height 1900 mm material transport 2 x D 350 mm located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Year of construction: 2003, condition: used, wood chip sieve Fpsdjx Ta Nfopfx Adasd

Condition: new, functionality: fully functional, Year of construction: 2021, machine/vehicle number: CTE 24712, - Model: Grading Bucket GB15-S60 - Weight: 559 kg Fodpfx Aevu Sk Eedaepd - Capacity: 750 l

Condition: used, Width: 40 cm Fpedeygdgyspfx Adaod Attachment suited for: Excavators Bucket volume: 0.13 m^3

Condition: excellent (used), color: other, Year of construction: 2021, Year of manufacture: 2021 Empty weight: 610 kg Width: 250 cm CE mark: yes Technical condition: very good Visual appearance: very good Condition CE type: CE Fodpfx Adeyf Udgoaepd

Condition: excellent (used), Year of construction: 2019, total height: 590 mm, total length: 1,410 mm, total width: 1,980 mm, Year of manufacture: 2019 Empty weight: 383 kg Fjdpfx Adsyf Uc Neaepd CE mark: yes Technical condition: very good Visual appearance: good Condition CE type: CE

Condition: good (used), power: 115 kW (156.36 HP), fuel type: diesel, first registration: 04/2016, Year of construction: 2016, operating hours: 9,235 h, Equipment: air conditioning, cabin, = Additional options and accessories = - Central lubrication = Remarks = Fpodpfjyfuqaex Adaod HYUNDAI ROBEX 160W-9A WHEELED EXCAVATOR, WITH BUCKET, CENTRAL LUBRICATION, CAMERA, QUICK COUPLER, EXTRA HYDRAULIC LINES, TRIPLE BOOM, AIR CONDITIONING, BELGIUM REGISTRATION, MACHINE IS IN EXCELLENT CONDITION, READY FOR WORK, MORE INFORMATION UPON REQUEST = Further information = Drive: Wheel Number of cylinders: 6 Unladen weight: 16,700 kg CE marking: yes Technical condition: good Visual condition: good Contact Gerrit Haverhoek or Piet Haverhoek for more information.

Condition: new, Year of construction: 2025, Hyundai HX225 Heavy Duty Screening Bucket Fodpfx Aoxw H Nwsdaepd Blade Length: 1200 mm Capacity: 1 m³

Condition: new, Bucket is heavy duty with extra welded edge in Hardox450 Bracket: CW40 Machine Tonnage: 20-25tons Edge Length: 600mm Capacity: 0.5m3 Weight: 690kg Fpedpexv Strofx Adaod From STOCK

Year of construction: 2024, condition: new, functionality: fully functional, Clamshell Bucket, Hydraulic Grab, Grain Bucket, Bucket Grapple, Clamshell Grapple, Capacity 2 m3 Gross Weight 1700 KG Rotation 360 Degree Fsdepcdd Aspfx Adaepd 1 Year Warranty - Company Mikron Hidrolik

Year of construction: 2010, condition: good (used), DTB Bucket elevator washing conveyor Fjdpfx Asu Hqnwodajpd Stainless, bucket elevator conveyor, site inside a 500L stainless tank with recirculation pump, previously used for washing olives, elevates to 1800,, belt width 250mm, overall length of system 2700mm, two in stock, 3Ph

Condition: good (used), Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine Fpodpfx Adeb A H R Eeaed -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable Fpodpfx Aeb A Rhljdajd -Width: 500 mm -Height: 900 mm -Depth: 1100 mm -Intermediate mounting dimension: 185 mm -Hole diameter: Ø 50 mm -teeth of tearing -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 190 kg

Condition: used, Year of construction: 2000, Attachment suited for: Construction machines Fpedpfoydkldox Adaod

Condition: used, Komatsu WA500 Loading Second Hand Bucket from Stock Fodpfsxrtrzjx Adaopd

Condition: new, Width: 130 cm Warranty: 6 months Selling price: € 4.500, US$ 4.791 Bucket volume: 1.15 m^3 Machine: CAT320 Bucket Type: Heavy Duty Blade Length: 1300mm Capacity: 1.15m^3 Fpsdsn Tm Adepfx Adaod Please contact for detailed information and bucket offers. Bucket production suitable for all brands and models 20 years of bucket production experience

Condition: new, CAT350 Marble Bucket Fpsdpsn Tm Eksfx Adaed The Galen marble bucket is a specialized attachment used in the mining and extraction of marble, designed to handle the unique characteristics of this natural stone. Its construction typically includes features that minimize wear and tear, utilizing materials and engineering tailored to the hardness and abrasiveness of marble to ensure efficient excavation and prolonged bucket life. For detailed information please contact us

Year of construction: 2023, condition: new, Please contact us for more information. Fpjdpjn Tm Utsfx Adaod