Used Chip Centrifuge for sale (5,841)

Condition: good (used), Filling quantity: 35 kg Redpfegl Auxex Ad Dsch

Condition: good (used), Year of construction: 1989, Drum diameter 600 mm Volume: approx. 100 l Speed: 735 rpm Max. load: 130 kg Rcjdpovyqhgjfx Ad Dsh Batches/hour: 10 Connection: 380 V - 50 Hz

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: S26802, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 8 A, Equipment: type plate available, Grinder Centrifuge, not put into service, practically new, attached to the transport pallet. Rcodpou Agicefx Ad Djh

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion Rodjw Nq Amopfx Ad Djch - Fully operational and ready for use - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, Complete system, centrifuge E 700 H/1, drum 690/720/600 mm, drum volume 120 L, speed 735 rpm, wall thickness 12 mm, material GS 45, max. loading 300 kg, batch/hour 10, Rcjdpfxow Evy Rj Ad Dsh heating 8 kW, operating voltage 380 V, total connected load 35 A, lifting device for filling, vibratory discharge for chips and parts, three separation drums with different perforation patterns. Chip conveyor belt to the scrap container. System can still be demonstrated under power.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Rcjdsw Nqu Ajpfx Ad Doh Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: good (used), System for de-oiling or drying chips / turning chips Machining Rcodpfx Aerrgd Dod Doh

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Rcedsxhffropfx Ad Djh Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: used, functionality: fully functional, Stationary Centrifuge for food products made of stainless steel, drum capacity 35 liters, voltage 220-240 V, current 1.2-2.1 A. 1400 rpm. Used in working condition. Redpfxjwk U H Tj Ad Djch

Condition: like new (used), maximum load weight: 96 kg, load capacity: 77 kg, Reconditioned ATEX centrifuge, model SCA-700. Rcodpfxorrwcls Ad Doh

Condition: used, Chip conveyor, chip elevator, inclined conveyor belt, used machine Manufacturer: Mayfran Rcjdpsxq Tg Asfx Ad Dsh Type: POO.96M3806.01 Overall dimensions: Width: 6300 mm Depth: 1050 mm Height: 1820 mm Belt size: 6600 × 330 mm Electrical data: 400 V Slat size: 30 mm Slat pitch: 245 mm

Year of construction: 1999, condition: good (used), Product: BMF Year of production: 1999 Metal chain width: 200 mm Long-distance guide lanes: approx. 300 mm Chip outlet length 900/1250 mm Insertion length: approx. 1000 mm Insertion height 260 mm Insertion width 350 mm Total length: 3600 mm Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min. Engine power: 0, 25 kW Mains connection was 400 volts, 50 Hz Enclosure size: H x W x D; 8700 x 900 x 1500 mm Rjdpfx Adshq Hz He Doch Weight 400 kg

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted - Fork entry pockets/forklift attachment Rodpfxjxpqzzj Ad Doch Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1190 mm Good condition Suitable for collecting, storing and transferring recyclables

Condition: used, Used Westfalia model CSA1-06-475 stainless steel clarifier centrifuge. Self cleaning bowl in steam sterilizable design. Internal pressure rated 1.5 bar pressure at 127 deg.c. Capacity rated approximately 13 litre. Unit includes 1.5kw, 1415rpm drive. All mounted on skid. Includes tools Rcjdpfx Ajxrb A Ued Doh

Condition: ready for operation (used), Heinzen (HMI) centrifugal batch spin dryer, Model SD 300 ES It includes the following features: * Capacity: up to 1800 kg per hour * Speeds: up to 15 cycles per hour * Stainless steel construction * Lid safety interlock * Basket specifications: Rcsdeu Rpwljpfx Ad Dsh – Dimensions: 76 cm diameter x 91 cm deep – 5 mm perforations and false bottom – Volume: 0.42 cbm – Weight: 90 kg

Condition: used, mileage: 14,05,000 km, Year of construction: 2006, Serial number: XLER6X2000512xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Rcsdpfxowqwlrj Ad Dsh Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gearbox: Automatic

Condition: new, Chip conveyor, inclined belt conveyor, used machine Manufacturer: Mayfran Rcedsxndabopfx Ad Deh Type: 50.6 SP15 Overall dimensions: Width: 6600 mm Depth: 1050 mm Height: 1750 mm Year of manufacture: 2018 Belt size: 7100 × 330 mm Belt speed: 4.6 m/min

Year of construction: 1987, condition: good (used), With a blister! Product: RUEZ Type: SFWW2 / 306DAU Rcsdogxqfcjpfx Ad Dsh Year of production: 1987 Metal chain width: 200 mm Distance guide lanes: approx. 300 mm Chip outlet length 700/1300 mm Insertion length: approx. 1000 mm Insertion height 260 mm Total length: 3000 mm Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min Engine power: 0.25 kW Mains connection was 400, 50 Hz Enclosure size: H x W x D; 1900 x 900 x 1300 mm Weight 300 kg Set of 2 pcs.

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled Rcjdpfx Adev Ngq Ao Dsh complete with boiler, stocker unit, and discharge system

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Rsdpfx Aspu A D Asd Djch Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, Felcon B.V. centrifuge, model: FE-300, number: 107, year of construction: 1999, 24.5 kW, plastic infeed belt, belt width: 230 mm, total dimensions: 4400 mm x 1600 mm x 2100 mm. Including trolley with extra belts, dimensions trolley: 2300 mm x 1200 mm x 1300 mm. Capacity is around 3000 kg per hour. Rcjdeun Tf Tjpfx Ad Deh

Condition: used, mileage: 9,75,000 km, Year of construction: 2014, Serial number: YS2R6X2000535xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21248 Specifications: Delivered with new EU inspection 2014 model Approx. 975,000 km Opticruise gearbox Full air suspension Tires (see photos) 2-way tipping Euro 6 Length: 860 cm Width: 255 cm Wheelbase: 410 / 135 cm Curb weight: 13,570 kg 6x2 581 hp Tow hitch Toolbox Autoline S90 sand spreaders High-beam auxiliary lights 2 x rotating beacons Minor damage to passenger-side step (see photos) 2 x beds Radio/CD Air conditioning Description:Scania R580 6x2 chip truck with 2-way tipping bed from 2014 for sale.The truck is in daily operation and will be delivered with a fresh EU inspection.A 2012 3-axle chip trailer can be included for an additional cost. Delivery by agreement. Km: 975000 HK: 580 Technical approved: Yes EU-approved until: 14.10.2026 Own weight: 13570 Total Weight: 28000 Rcodpfx Ajw Ucived Deh Payload: 14355 Width: 255 Length: 860 Euro: 6 Model: R580 Gearbox: Automatic

Year of construction: 1996, condition: excellent (used), Wood chip screen Manufacturer - Konewood, year 1996, model CS600 Rodpfxjxn T R Ae Ad Djch Screen capacity 400-675m3/h

Year of construction: 1990, condition: good (used), With a blister! Product: RUEZ Type: SFWW2 / DAS406 Year of production: 1990 Metal chain width: 330 mm Distance guide lanes: approx. 300 mm Rcsdpfogxqgzsx Ad Doh Chip outlet length 2000/1000 mm Insertion height 260 mm Total length: 3000 mm Transport height - ejection height: 1100 mm

Condition: ready for operation (used), Works as it should. It comes with one basket. The Sormac HS Centrifuge will remove free standing water from the leaf surface. The basket with product is placed in the centrifuge, the lid closed and the machine will start. After a pre-set time the machine will stop, the lid can be opened, the dewatered product can be removed. The machine can be supplied with the option of an adjustable timer. In the HS-Flex execution the rotation speed is adjustable between 250 and 850 rpm. The centrifugation time can also be set by means of a timer. When the basket turns, the lid is blocked. Because the drum slowly starts and stops, this execution is particularly suitable for sensitive product. In addition, can be chosen for a turning function. In this case the rotation direction changes during the process so that the leaf can be even better dewatered The centrifuge is mounted on 4 adjustable feet that also function as absorbers for the spinning vibration. It is not necessary to fix the centrifuge to the floor. Rodpfx Adst Sahvs Doch