Used Chip Heat for sale (18,079)

Condition: good (used), functionality: fully functional, input voltage: 220 V, total width: 379 mm, total length: 450 mm, total height: 850 mm, input frequency: 50 Hz, DGUV certified until: 03/2027, Warming cabinet Fedpfxjvdktqs Adaefw Temperature adjustable up to 90°C Stainless steel construction Dimensions: 379 x 450 x 850 mm (WxDxH) Connection: 220V Used device Delivery service Many more great bakery machines in stock!

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. Ffjdpfsdfc Ikox Adaew 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons Ffedpfx Ajgv I N Uedaew 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. Ffjdpfogv I Ihjx Adaow 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW Ffodpfx Adjgwa Ureasw 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: used, Professional, automatic sandwich packaging sealer capable of sealing a wide range of film or cardboard lids onto plastic, cardboard, or film containers. Manufacturer: MPE UK Ltd Model: SL 1200 Fsdpfx Adjx H S T Ajasfw Output: max. 48 packs/min. Used machine.

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Fsdpfjyfnulsx Adajfw Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Medium: Water / Glycol

Condition: new, Year of construction: 2025, Capacity: 1000 - 1500 kg/hour Electric Motor Power: 15 kW Ffjdpfx Asd Im Adsdajw Machine Weight: 1800 kg

Condition: new, Year of construction: 2026, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. Ffsdpfxoudalwo Adaew The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Condition: new, Year of construction: 2026, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 230V or 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h Fsdpfx Aovugghedaofw ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg The price given is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 4500E is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron Ffodpfx Adouc Uchoajw NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Condition: new, Year of construction: 2026, A machine designed for aluminium and steel chips (not aluminium dust) as well as grinding dust collection from machines, along with cleaning workstations. A side turbine makes the collector perfect for connection to machines that produce large number of chips. Also equipped with a dust filter and a tank (a drawer) for by-product removal. Machine features Quick and easy filter replacement Large container for waste with easy access Compact and stable body High efficiency Technical data Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400V/50Hz Ffsdpfjvuq Amsx Adasw Intake connectors 2×100 mm Suction efficiency without bag 2200 m³/h Suction efficiency with bag/hose 1500 m³/h Dimensions 840×660×710 mm Weight 72 kg

Condition: new, Year of construction: 2026, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER Ffsdpfx Adeudaazsajw 300 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 45 DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, DCV series extractors in the TC Viber version have been created. Designing a new technological line has allowed us to create high-class extractors Advantages has an additional pair of doors for easier bag replacement DCV 6500TC extractor is another milestone in the production of efficient sawdust and dust extractors whose aim is to constantly provide the same extraction parameters during the entire work cycle. the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Failure-free filter shaking system with the possibility of working in an automatic cycle The new patented security system on the market guarantees failure-free operation of the device, durable, massive construction guaranteeing quiet and vibration-free operation of the extractor takes up little space and yet can extract large amounts of dust and chips > strong and quiet fan guaranteeing high vacuum efficiency! failure-free operation confirmed by production plants dealing with large orders every day they have a special blade design, making them more efficient and effective, and also contributing to energy savings very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 6500 extractors quick replacement of waste containers designed in such a way as to maintain 99.99% airtightness of the system, metal waste containers with a mobile driving system facilitating trouble-free movement. Also equipped with a peephole to help check the level of filling of the containers low noise and high efficiency are ensured by a balanced metal rotor and an improved engine ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. Control cabinet for switching the device on / off We guarantee high quality of cleaning !!! polyester filter stops dust up to 5 microns in diameter, to filter smaller particles, use a filter such as HEPA It is forbidden to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw material, e.g. wet sawdust) Before starting the extractor, dismantle the lower beam to have free access to the containers for shavings POLISH PRODUCTION Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION EFFICIENCY 6500 m3/h SUCTION PORT DIAMETER 280 mm SPEED SUCTION 28-32 m/s FILTER SURFACE 16 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 32 WASTE CONTAINER CAPACITY 500 L Fodjuc U N Ujpfx Adasfw DIMENSIONS 2440 x 930 x 2270 mm WEIGHT 440 kg

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Fsdexzrzajpfx Adaofw Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg WARNING!! This machine is a return item. Mechanical damage to the casing, broken electrical box.

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Ffedpfx Ajuc Unqjdajw Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 1x heating tape available -Price per piece Ffsdpfx Adolvykxjaew -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: good (used), Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor, hinge belt conveyor, scraper belt conveyor -Chip conveyor: Hinged belt conveyor Fodpfsyiy Rtsx Adaefw -Conveyor belt width: 200 mm -Trough length: 2120 mm -Outlet height: 860 mm -Drive: Flender 0.25 kW / 3 m/min -Dimensions: see photo technical drawing -Dimensions: 3370/565/H1460 mm -Weight: 206 kg

Condition: like new (used), Year of construction: 2023, operating hours: 3,577 h, functionality: fully functional, power: 130 kW (176.75 HP), heating capacity: 130 kW (176.75 HP), We are offering a converted overseas container equipped with a Herz Firematic 130 boiler system. The heating system delivers 130 kW and can be removed from the container for installation at another location if required. Additional doors have been installed in the heating container for maintenance and inspection, providing easy access to the equipment. The boiler is fired with wood pellets, and a pellet hopper with a capacity of approximately 1.5 tons is integrated within the heating container. Due to its container construction, the heating module is easy to transport. The interior of the container has been lined and treated with a special coating to prevent condensation drip formation. The heating system is in near-new condition and has only seen very limited use. The current operating hours total 3,577, which equates to approximately 149 days. The Herz Firematic 130 was manufactured in 2023. A buffer tank is included. Further technical information can be found in the attachment. Ffodpfxeybbphe Adaow

Condition: used, Chip conveyor, chip elevator, inclined conveyor belt, used machine Fedpfxsydbzve Adasfw Manufacturer: Mayfran Type: POO.96M3806.01 Overall dimensions: Width: 6300 mm Depth: 1050 mm Height: 1820 mm Belt size: 6600 × 330 mm Electrical data: 400 V Slat size: 30 mm Slat pitch: 245 mm

Condition: good (used), Nestro NE 200 clean air extraction system from a training facility. Ffjdpfx Ajyqkqgodasw

Condition: excellent (used), functionality: fully functional, Chamber convection furnace with hot gas circulation for tempering, annealing, preheating, etc. Type: N 250/85 A Effective chamber dimensions (W × D × H): approx. 650 × 750 × 650 mm Maximum temperature: 850 °C Heating capacity: 20 kW Rated current: 29.0 A Power supply: 3 × 400 V AC, 3N / PE via CEE 32 A plug (alternatively hardwired connection possible) Ffodpfx Aex Eiu Sjdasw

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): Fodsytg Rbepfx Adajfw - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: ready for operation (used), Year of construction: 2018, operating hours: 19,681 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, overall weight: 23,000 kg, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER 620 GS-NL (Complete Package) Available complete natural gas power plant based on Jenbacher 620 GS-NL, already dismantled and ready for loading. The unit was stopped while running properly at full load. Ffsdpfxsytgxfj Adasw Maintenance All maintenance has been performed by official services, following the manufacturer’s schedule. Premium shortblock: completed in 2018 (report available). Skid / generating set components: 2008. Borescope inspection: available. Technical data Brand: Jenbacher Model: 620 GS-NL Power: 3,044 kW Fuel: Natural Gas Frequency: 50 Hz Total running hours: 19,681 h Voltage: 6,300 V Scope of supply (included) Genset Gas train “Diane Blue” Silencer Oil system Refrigeration system Transformer Switch breakers Auxiliaries cabinet Status / Availability Availability: Immediate The assets are already dismantled in our warehouse, ready to be loaded or inspected. For more information please contact us!

Condition: new, Year of construction: 1988, For sale: mobile industrial fan from the former GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), powered by a 0.75 kW motor from the USSR. Sturdy steel construction on castors – ideal for dust extraction, air supply, local ventilation, or machine cooling. Technical data: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not fully specified – likely 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Manufactured in the USSR Ffedpfxoud R Iis Adajw Advantages: • Compact and mobile design • Operational drive, ready for use • Suitable for workshops, paint shops, ventilation, burners