Used Chisel Mortiser for sale (395)

Condition: used, Year of construction: 1973, Storage location: Nattheim Njdsvvkt Uepfx Ah Rswd

Condition: used, Year of construction: 2007, Fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished. The complete movement, clamping and, mortising cycle is fully automatic. X, Y and, Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises up to 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. Year - 2007 CE X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. Nsdpfxjymnbnj Ah Rowd 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points. Working table dimensions 1210mm x 215mm Air supply 6 bar / 470 l/min consumption. Fitted with separate dedicated programmable hollow chisel head for producing the small mortises for glazing bars

Condition: used, Square Mortise Drill, 4-sided Mortiser Chain Mortiser, Tenon Mortise Machine MAKA (Max Mayer) TYPE ED 30 Serial No. 3130 Tenon width: 75 mm Throat depth: 0 to 75 mm (without wood plate) Hand lever stroke: approx. 125 mm Max. clamping width: 140 mm Chisel width: 8 mm Speed: 2800 rpm Motor power: 0.3 kW Power connection: 380 Volt, 50 Hz - Adjustable mortise stroke via eccentric shaft - Depth feed via hand lever - Mortiser adjustable up to 75 mm via threaded spindle - Quick-release lever for clamping device Njdpjxw Rbdjfx Ah Rewd - Double column guide, robust design - Suitable for mortising rectangular holes for tenon joints Dimensions (L x W x H): 420 x 360 x 400 mm Net weight: 38 kg Very good condition

Condition: ready for operation (used), Technical characteristics Table dimensions 1000 x 300 mm Control on the chassis + pedal Motor power : 2,2 kW Mechanical counter SIKO Protected machine MortaisageChisel Nwsdpfx Ast T Igpsh Rod Power and Motors Voltage: 380 V Pluging: Three-phased Motor: 3 CV Overall dimensions Weight: 650 Kg

Condition: ready for operation (used), Technical characteristics Square mortises, chipped, without lubrication Horizontal frontal stroke 90 mm Pneumatic feed Tilting head Pneumatic presser Aluminium table 1200 mm Njdpfx Ahjt Dgbmj Rswd Ideal machine for furniture and carpentry Power and Motors Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Square mortises, without lubrication Horizontal front stroke 90 mm Pneumatic feed Tilting head Nsdpjt Dgb Hefx Ah Rjwd Pneumatic presser Aluminium table 1200 mm Ideal machine for furniture and carpentry Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Square mortises, chipped, without lubrication Horizontal front stroke 90 mm Pneumatic feed Tilting head Nwsdjuaiikepfx Ah Rsd Pneumatic press Aluminium table 1200 mm Ideal machine for furniture and carpentry MortaisageChisel Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Mortise length : 20 to 110 mm Mortise thickness : 2 to 29 mm Max. mortise depth : 110 mm Cast-iron frame, aluminum table Manual workpiece clamping (2 vertical pressers and 1 front presser) Motor 1.1 kW (1.5 hp), 3000 RPM Wood dimensions : Width : 30 to 150 mm Thickness : 15 to 80 mm Automatic part feed from magazine Automatic mortising head feed Power and Motors Voltage: 380 V Pluging: Three-phased Power: 1,5 Kw Motor: 1,5 CV Nwsdpfet Dgacex Ah Rod Overall dimensions Lenght: 4100 mm Width: 1350 mm Height: 1500 mm Weight: 600 Kg

Condition: ready for operation (used), Technical characteristics 3-axis controlled mortising machine Max. machinable solid part size : 275 x 160 mm Max. mortising depth : 130 mm Hydraulic motor : 0.75 kW Work table : Dimensions : 1000 x 310 mm Longitudinal travel : 400 mm Cross travel : 150 mm 2 extensions, length 1200 mm Extension with electronic stop : 2600 mm Electronic stop travel speed : 40 m/min Workpiece clamping with hydraulic pistons (2 front and 2 vertical) Mortising heads : Manual vertical adjustment Motorized vertical adjustment Vernier for quick calculation of chisel oscillation angle 2.2 kW motor Pneumatic circuit operating pressure : 6-8 bar Upper suction mouth diameter : 80 mm Suction speed : 25-30 m/sec Power and Motors Voltage: 380 V Nwodpfx Ast Dgaish Red Pluging: Three-phased Power: 3 Kw Motor: 3 CV Overall dimensions Lenght: 1000 mm Width: 1400 mm Weight: 850 Kg

Condition: new, Automatic mortising machine with 3 heads Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement in adjustable through hydraulics Automatic operation Mortising heads x 3. Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Double eccentric operation of the mortising heads (patented design) Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - ctre to ctre of mortise. Nwsdpfx Asn Nv Txeh Red Dust extraction outlets 100mm Hydraulic pump motor 10hp

Condition: new, Centauro BETA 3 Axis CNC Swing Chisel Mortiser A new fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished.The complete movement, clamping and mortising cycle is fully automatic. X,Y and Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises upto 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. On request the machine can be equipped with a separate dedicated programmable hollow chisel head for producing the small mortise holes for glazing bars. Alternatively a horizontal milling head can be specified that can be used for hinge recessing, slotting for louvre doors etc etc. X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm (wider on request). Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Njdpfxob Tmpqo Ah Rjwd Anti splinter guards with air blowers and dust extraction points.1 x 80mm 1 x 60mm dia. Working table dimensions 1210mm x 215mm Installed power 3.6kw. (std machine) Air supply 6 bar / 470 l/min consumption.

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Nsdpfxjfd Rxqe Ah Rewd Db-6 v Description: VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Year: 1977

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Storage location: Garbsen Nwjdpfx Ajvvi Iwoh Rjd

Condition: used, Swiveling aggregate, chain width 10 mm Nodsvvku Espfx Ah Rowd Storage location: Nattheim

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Nwedpfxev Hm Nmj Ah Red Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Number of knives 24 z= width 15/20 mm Nwjdoywzwxepfx Ah Rod circle diameter 240 mm material Stahl HM Bore diameter 30 mm

Condition: good (used), Code: 0284 Brand: MASTERWOOD Model: LABOR B1/V - CE Standard 1-Head vertical chisel mortising machine for wooden frames, doors, solid wood and various - CE Standard Technical data Head motor Hp 3 Head vertical stroke mm 150 (useful mm 110) Head longitudinal stroke mm 285 Head transversal stroke mm 80 Nodpotmvpzofx Ah Rswd Worktable vertical stroke mm 260 Pneumatic workpiece clamping Overall dimensions mm 900 x 900 x 1800 h Weight kg 410

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Nsdpfx Aheytx Uxe Rswd Motor output 1,5 kW

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Nwedpfx Ajytx T Ish Rod Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment (technical data according to manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Handle hole motor Faceplate motor Lubrication system Extraction connection D 80/100 mm Space requirements approx. 1200 mm x 700 mm x 2000 mm Nwodpfxsyuty Sj Ah Red Weight approx. 300 kg Storage location: at customer's site Sale as is, as inspected, without guarantee or warranty

Condition: like new (used), Chain Mortiser LS 103 EO - 8.7 kg - Year of manufacture: 2016 - 230 Volt - with stand - 2600 Watt Nwedpfx Asyty I Heh Rsd

Condition: excellent (used), Chain milling machine - Wall-mounted with multiple chains Njdpfxsytvr Is Ah Rswd - 3 rails - robust design - 380 volts

Condition: used, Year of construction: 1980, Used machine Nwjdpfx Aheyq T Ibo Red Year of manufacture: 1980 Features and technical data: - Lock case milling unit - Handle hole borer - Face plate milling cutter - 1.5 kW motor - 2800 rpm Availability: short-term Location: 63934 Röllbach

Year of construction: 1999, condition: used, Equipment • main product feeder • 10 supplement feeder • 2x compensating stacker CN 20 Njdpfx Ahjbngf So Rswd

Year of construction: 1998, condition: used, 420 x 300mm 18.000c/h Main product feeder Suction opening station 1 Tandem product insert stations 2 Product supplement feeder Nwsdpfx Ahobngfge Rsd 1 Tandem product supplement Stations