Used Chisel Mortiser for sale (338)

Condition: used, Diamond core drilling machine, drill, REMS Picus S1 Basic-Pack electric diamond core drill + REMS Simplex 2 drill stand, Used machine Manufacturer: Rems Type: Picus S1 Overall dimensions: Width: 670 mm Depth: 260 mm Height: 160 mm REMS Picus S1 Basic-Pack Motor: 1850 W universal motor Speed (under load): ~ 580 rpm Max. drilling diameter in reinforced concrete: Ø 102 mm (up to Ø 132 mm under certain conditions) Max. drilling diameter in brick / masonry: Ø 162 mm Drilling depth: up to 420 mm Weight: approx. 5.2 kg Ledpfx Aasxpqvroboah Connections & accessories: Drill bit connection: UNC 1¼ external thread, G ½ internal (water connection) Water supply unit with shut-off valve, quick coupling, and water stop function Multifunctional electronics: soft start, overload protection, idle speed limiter, blockage protection Safety slip clutch REMS Simplex 2 Drill Stand Suitable for core drilling up to Ø 200 mm Drill column: precision, square steel profile Ø 50 mm Adjustable for floor unevenness: 4 screws for correction Slide guide: adjustable on all sides, with preloaded plastic bearings Drive: rack-and-pinion system with ratchet lever operation Clamp and collar for Ø 60 mm gearbox mounting Integrated spirit level, with slide lock for easier adjustment and transport Weight: approx. 12 kg

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) Lsdpfx Aajvc Awxsboah *

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Lsdsxqd D Sjpfx Aabjah Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis Ledpfx Aajxphnfebeah fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: as good as new (ex-display), GAU JING GN 6S23 four-sided planing machine TECHNICAL PARAMETERS: - 6 heads - electric brakes - electric planing thickness setting - universal spindles - ideal for wet and dry wood - used planer, very good condition -max width of processed workpiece 230mm max height of the workpiece 160mm - 6 spindles: 1) horizontal bottom 230mm 7.5kW 2) vertical right 160mm 7.5kW 3) vertical left 160mm 7.5kW 3 spindle electrically adjustable front/rear 0,4kW 4) horizontal top 230mm 18.5kW 4 spindle electrically adjustable up/down 0,4kW 5) horizontal bottom 230mm 7,5kW 6) universal 230mm 7.5kW -universal spindle electrically adjustable up/down -all spindles adjustable up/down, right/left -all spindles equipped with electric brake -diameter of spindles 1,2,3,4,5 50mm -diameter of universal spindle 40mm -from top 6 pulling, toothed, metal, torsion input shafts including 2 double ones -from top 5 pulling, rubber, smooth shafts, including 3 double ones -from the bottom, from the side, the pressure on the introduction -from the bottom 2 trailing, metal, toothed, torsion rollers -from below 2 side pressure rollers -from below 2 drawing rollers, smooth, metal -feed on cardan rollers -pneumatically pressed rollers -floating feed speed control on inverter -feed motor 5.5kW -electric adjustment of planing thickness at two spindles -lift motor 0.37kW -length of input table 1800mm -central lubrication -extraction spigot diameter 6x125mm -closed in the cabin MACHINE DIMENSIONS: - Length: 5100 mm - Width: 2250 mm - Height: 1850 mm - weight~5500 kg It is possible to test the machine on site Possibility to finance the machine through leasing or installment. WE ORGANIZE TRANSPORT JBS CARPENTRY MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE You are welcome to contact us in GERMAN at phone number: 663 495 647 We have the following machines: Lajdpfxjul Ulps Aaboh band saws, circular saws, cross and format saws, thicknessers, levelers, grinders, horizontal and vertical drills, feeders, sharpeners, four-sided planer, four-sided planer, three-sided planer, three-sided planer, two-sided planer, thicknesser, leveler, sander, planer, planing machine, planer-thicknesser, planer-thicknesser, thicknesser-thicknesser, thicknesser-thicknesser, cleaning machine, stick machine, shaking machine, parquet machine, edger, edger, edger, for log houses,milling machine, milling machines, bottom-spindle, upper spindle, upper, lower, grinders, long-belt, wide-belt, through-belt, roller, disc, angle, levelling machine, drill, drills, horizontal, radial, milling machine, multispindle, veneering machines, veneering machine, veneering machine, press, presses, lathes, sawmills, briquetting machines, briquetting machine, chippers, chipper, rembacer, tenoning machine, tenoning machines, chiseling machines, chiseling machine, sawdust extraction, extraction, extractor, extractor, fan, fans, sharpening machine, sharpening machines, compressor, compressors, sharpeners, multitasking. Manufacturers such as: SCM, MARTIN, ALTENDORF, JAROMA, MAGGI, GOMAD, GOMAG, GOMA, BAUERLE, WEINIG, WINTER, KOFAMA, FELDER, ŻEFAM, , SICAR, TOS SVITAVY, KUPFERMUHLER, kupermiler, SANDING MASTER, SCHNEIDER, BUTFERING, DANSKAERT, ZOTECH, SAFO, HARBS, HOLZ - HER, ROBLAND, PEMAL, BEZ, KRAKOWSKA, GERMAN, OPTIMAT, JONSDORF, LIGNUMA, OTT, SOP-MASZ, NOES, GUBISCH, HOUFEK

Condition: good (used), We have numerous Multifix Toolpost, size C in various versions in stock. Lasdpfsd Ha Nfjx Aabsh Partly also with a drill and chisel. Accurate data and requests please ask. Also in larger quantities.

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Ledpfxernkhyj Aabsah Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Year of construction: 2022, condition: used, Control, protective enclosure, air table, slat conveyor, weight: 3,000 kg, power: 24.94 kW Ljdpexnac Ssfx Aaboah

Condition: new, Year of construction: 2022, Drilling depth 170 mm Drilling width 250 Speed 2800 rpm HOLZKRAFT long hole drilling machine LLB 30 Entry level long hole drilling machine with single hand lever, eccentric clamp, dowel drilling device and drill head height adjustment with handwheel and numerical display for fast and precise working working table (LxW): 580 x 300 mm drilling width: 250 mm drilling depth (at 90°): 170 mm drill head height adjustment: 200 mm working table rotation range: not rotatable tool holder: WESCOTT drill chuck tool clamping range: Ø 0 - 20 mm spindle speed: 2.800 min-1 motor power: 2,2 kW | 400 V - 50 Hz suction nozzle: Ø 70 mm dimensions (LxWxH): 1500 x 920 x 1400 mm Weight (net): approx. 160 kg Including dowel drilling device, eccentric clamp, numerical display height adjustment, Wescott drill chuck 0-20 mm Ledpfx Asih H A Roaboah HOLZKRAFT LLB 30 slot drilling machine - entry-level machine for professional slot drilling - Made in EU Easy operation via one-hand lever for fast and precise work Drill head with hardened prism guides and bearing with ball contact system Drill head height adjustment with hand wheel and numerical display Manual eccentric clamp Sturdy cast steel construction Powerful three-phase motor Dowel device with grid position 16 | 22 | 27 | 32 mm Clamping stops allow easy and quick adjustment of the drill head run Scope of delivery HOLZKRAFT LLB 30 slot mortising machine Drill head height adjustment with hand wheel and numerical display Dowel drilling device with grid Eccentric clamp Wescott drill chuck 0 - 20 mm Instruction manual with exploded views, spare parts lists and CE- Declaration of Conformity Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), Code: 0100 Brand: MASTERWOOD Model: OMS 4MM - CE Standard Chain and lock mortising machine for all types of lock housing, for wooden doors, window frames , furniture, shelves - CE Standard Aggregate with 2 horizontal milling cutters for simultaneous execution of key slot and handle hole Max depth of cut mm 150 Max length of cut mm 330 Transversal stroke mm 80 Max working height for doors mm 1000 Vertical worktable stroke mm 250 Mortising machine motor power output Kw 3 Laodpfxjwd Rwbs Aabeh Vertical unit motor power output Kw 0,55 Horizontal unit motor power output Kw 1,84 Suction port diameter mm 120 Overall dimensions mm 1400 x 950 x 2100 h Weight kg 850

Condition: good (used), Tenoning and Mortising Machine T27 - Adjustment of milling spindle & crosscut saw via handwheel - Milling spindle height adjustment range: 145 mm - Crosscut saw height adjustment range: 190 mm - Maximum clamping height for milling tools: 135 mm - Maximum diameter of milling tools: 390 mm - Spindle speeds: 3000 & 4500 rpm - Tool holder diameter for milling tools: 40 mm - Length stop: 1.75 m Lasdjxlkv Rjpfx Aabeh - Weight: 720 kg

Condition: like new (used), Year of construction: 2022, Excavator class: 27,0 - 36,0 ton Weight: 2610 Kg number of blows: 200 - 300 bpm working pressure: 160 - 180 kg/cm oil flow rate: 180 - 240 l/min Chisel diameter: 155 mm Ljdslqaknjpfx Aabeah All models are supplied with chisel, hose set, tool box.

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg Lajdpfx Ajvw Rqieabeh * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) Ledpfow I Ea Djx Aabjah controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: like new (used), Year of construction: 2018, Panhans Mortising Machine Type: 116/10 - Max. drilling depth: 145 mm - Max. drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Color: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Fixed table, smooth-running mobile drill motor Mobility kit for increased flexibility Cast iron table 700 x 380 mm, thick-walled and highly ribbed Smooth, backlash-free cross-slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length restriction via adjustable side stops left and right Drill motor output 1.3 kW/1.8 HP with motor brake and convenient tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling system for row drilling with indexing roller: 16, 22, 25, and 32 mm, high-precision machined indexing, fixing via spring-loaded indexing bolt Detachable frame stop with index pin for positions: center, left, right Ljdpoxgu Tvjfx Aabjah CE-compliant GS certified Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -

Year of construction: 1988, condition: reconditioned (used), Grinder type DURE Cel The grinder is designed for sharpening woodworking tools such as: circular, straight and helical tooth milling cutters; milling heads, circular saws with carbide blades, planer blades; chisels. It is used in vegetable sawmills for woodworking. Dure grinder Technical and operating data Supply voltage: ~3 x 400 V; 50 Hz Largest tool travel of the tool carrier: 660 mm Largest travel of the cross slide: 160 mm Largest horizontal travel of grinding head: 140 mm Rotation of grinding head in horizontal plane: 360° Rotation of the grinding head in the vertical plane: ± 30 ° Largest vertical displacement of the grinding head: 240 mm Spindle speed: 3500 or 6000 min-1 Overall dimensions of the sharpener (L x W x H): 1380x830x1460 mm Weight of the grinder (with accessories): 515 kg Laedsuuk Dtopfx Aaboh Largest diameter of sharpened cutters: 250 mm Largest diameter of sharpened blades: 600 mm Diameter of shanks of sharpened cutters: max. 20 mm Maximum length of sharpened blades: 640 mm Year: 1988

Condition: used, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20891 Specifications: 2013 model Fully overhauled with new chisel Weight: approx. 3,800 kg Ljdjwwqf Sepfx Aabsah Chisel diameter: Ø175 mm Automatic lubrication Max operating pressure: 190 bar Max oil flow: 272 l/min CE-marked Quick coupler: G90 (can be sold without for reduced price) Description:DandA 550V hydraulic breaker from 2013, equipped with G90 quick coupler.Fully serviced and delivered with a brand-new chisel.Option to purchase without the quick coupler at a reduced price.CE-certified and ready for delivery. Own weight: 3800 Model: Silence 550V

Condition: reconditioned (used), functionality: fully functional, operation weight: 200 kg, Year of construction: 2022, Equipment: hydraulics, EPIROC SB 202 hydraulic breaker overhauled With Lehnhoff MS03 mounting plate Hydraulic hoses with couplings and 1x point chisel Operating weight 200 kg Lasdpfjttv Sxex Aabjh Oil flow 35 l/min - 65 l/min Operating pressure 100 bar - 150 bar Impact frequency 850 - 1800 impacts/min Diameter of insertion tool 65 mm Working length of the tool 300 mm Carrier weight class 2.5 t - 6 t Hydraulic input power, max. 17 kW Guaranteed sound power level 118 dB

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) * Ledpfxou Nfmys Aabeah

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Ledpfx Aajwg Hr Tobsah Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article x slanted window control for vertical cylinder Article x pendulum pressure plates attachable for pressing up to 60 degrees Article Double pendulum pressure plate for pointed window (triangle) Article x extension for p...

Condition: excellent (used), 5-axis combined machine (thickness planer, jointer, mortiser, saw, and router) Thickness planer: Usable width: 310 mm Usable height: 230 mm Laedpfx Aaewh U Eqoboh Cutter block: 3 planer knives Joint planer: Usable width: 310 mm Table length: 1400 mm Shaft diameter: 70 mm Router: Spindle diameter: 30 mm, length: 125 mm Table width: 800 mm Router stop Saw: Saw blade diameter: 250 mm, pivotable by 45°. Cutting height with 250 mm blade: 80 mm Table width: 800 mm Rip fence length: 635 mm Mortise drilling machine: Mortise milling from (0 to 16 mm) Power and motors Voltage: 380 V Connection: Three-phase Location: From stock, 54634 Bitburg - Available immediately -

Condition: used, Year of construction: 2009, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20894 Specifications: Year: 2009 Weight (without coupler): 3,532 kg Chisel diameter: Ø170 mm Remaining chisel length (exposed): 66 cm Impact rate: 200–350 BPM Operating pressure: 160–180 bar Oil flow: 210–290 l/min Quick coupler: KM3 (optional removal for price reduction) Autogrease system Hydraulic hoses in good condition, length: 350 cm Description:Giant GT200 hydraulic breaker from 2009, equipped with KM3 quick coupler.Recommended carrier size: 40–50 tons (according to owner).Quick coupler can be excluded for reduced price.Ready for delivery. Own weight: 3532 Model: GT200 Lasdpfxowwqffo Aabjh

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW Ledpfxjxdttpe Aabjah - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° Lasdpsxdttijfx Aaboh - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Ljdpovk Dqvofx Aabjah Location: from stock 54634 Bitburg - immediately available -