Used Mortise for sale (242)

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Laedpfs Aa A Eqsx Alyeh Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: good (used), functionality: fully functional, Year of construction: 1970, overall weight: 2,500 kg, broaching length: 300 mm, total length: 2,000 mm, total width: 2,000 mm, GSP M743 mortising machine Travel: 0 to 300 Stroke: 3 to 52 Weight: 2.5 tons Rapid traverses on both axes Rapid traverse on table rotation, diameter 700 Lasdpfx Ajz Ingvjlyeh In very good condition

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Laedpszy I Tcsfx Alysh

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Ljdpfx Ajyuty Sjlysah Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months. Lasdpfx Aez Efwyjlyeh

Condition: used, Year of construction: 1993, Used Machine Year of Manufacture: 1993 Features and Technical Specifications: - 2-jaw drill chuck for shanks up to 20 mm in diameter - Pneumatic position adjustment - On 2 levels: 0–100 mm - Max. drilling depth: 150 mm - Precision indexing rail, 12 mm - Center locking and cross adjustment - 2 pneumatic safety clamping cylinders Laedsz I Uffepfx Alyoh - Motor: 1.5 kW - Speed: 2,800 rpm - Lowerable slotted hole drilling unit with 2 program cams - Machine weight: approx. 310 kg - Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop)

Condition: used, Year of construction: 2023, Used Machine Year of Manufacture: 2023 Condition: Like new; only a few drill holes have been made Features and Technical Specifications: - Spindle speed: 3,000 rpm - Drilling width: 240 mm - Max. drilling depth at 90°: 180 mm - Drill head height adjustment: 160 mm - Tool clamping range: 0–20 mm - Work table rotation: ±60° Lajdpfx Alozk Ni Tjysh - Work table length: 565 mm - Work table width: 315 mm - Exhaust port diameter: 90 mm - Output power: 2.2 kW - Supply voltage: 400 V - Power frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: Available shortly Location: Röllbach

Condition: good (used), Code: 0485 Brand: MASTERWOOD Model: CV1- CE Standard Chain mortising machine for cutting mortises in wooden joinery, doors, furniture, shelves and other items – CE Standard Laedpfx Aloz Et Imeysh Technical data: Sturdy cast iron frame Max mortise depth 180 mm – Effective depth 150 mm Max mortise length 280 mm Transverse stroke of cutting head 80 mm Vertical stroke of worktable 200 mm Motor 1,8 Hp Max workpiece height 900 mm Suction inlet diameter 120 mm Overall dimensions mm 1000 x 600 x 1750 h Weight kg 170

Condition: used, Year of construction: 2022, Automatic mortising machine with 3 heads ideal for mortising of doors, gates, gate posts, general joinery Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement is adjustable through hydraulics Automatic operation 3 x Mortising heads each : Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Ljdpfx Alozd Uy Rjyoah Double eccentric operation of the heads (patented design) Each mortise head Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - centre to centre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp Serial nr - 127-22 Year - 2022 CE

Condition: good (used), Year of construction: 2005, Type 1B/1K-M Max. length of workpiece. 5000 mm Lsdpju Hi Trsfx Alyoah Max. workpiece width. 300 mm Quontity of mortising: 180 mm Max. working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2005y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 4900 Eur (EXW Jonava, Lithuania)

Condition: used, The Festo Type PP chain mortiser is a chain milling machine with pneumatic feed for milling out lock cases and other fittings. The machine is suitable for producing precise recesses in woodworking applications. Technical data: Lsdjzryruepfx Alysah - Motor: 1.6 kW - Guide bar length: 150 mm - Chain width: 7–8 mm

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Laodpfxsv Hm Nms Alyeh Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism LxWxH 850x1000x1050 mm Weight approx. 240 kg Lodpfxezk Nupj Alysah Availability: at short notice Storage location: Flörsheim

Condition: like new (used), DISPLAY MODEL For sale is an as-new JET Mortising Machine 719-AS equipped with a powerful motor for demanding applications. The display model is in its original condition, so you benefit from the full warranty. Technical specifications - Motor: 230 V / 1,300 W - Spindle speed: 1,450 rpm - Max. chisel size (hard/softwood): 19 x 19 / 25 x 25 mm - Keyless drill chuck: 13 mm - Max. workpiece height: 195 mm - Max. chisel stroke: 200 mm - Table travel (longitudinal/cross): 400 / 100 mm - Table tilt: 0 – 35° - Table dimensions: 520 x 180 mm Laedpfxjyb Sbno Alyoh - Workpiece stop: 520 x 90 mm - Max. distance from chisel center to stop: 100 mm - Machine dimensions: 650 x 500 x 1760 mm - Weight: 125 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €75.00 incl. VAT Germany: €95.00 incl. VAT South Tyrol: €125.00 incl. VAT Related terms: JET 719-AS, mortising machine, slot mortising, wood jointing, 230 V drive, 1300W power, professional tool, workshop equipment, precision engineering, woodworking Reference: R-A0117

Condition: good (used), Code: 0423 Brand: ME.SA - ITALY Model: GT 60 S - CE Standard Laodezgt Edjpfx Alyeh Chain and locks mortising machine with bits and cutters for joinery, wooden joinery, doors, furniture and various – CE Standard Technical data: Max mortise length 250 mm Head transverse stroke mm 100 Head rotation +/- 45° Vertical stroke of upright bracket 250 mm Vertical rotation of upright bracket +/- 45° Max window/door frame height 1000 mm Chain motor 3 Hp Vertical spindle motor 2 Hp Min/max horizontal spindle centre distance 50/130 mm Overall dimensions mm 850 x 900 x 1900 h Weight kg 390

Condition: used, Year of construction: 2007, Type 1B/1K-M Max. length of workpiece. 5000 mm Laodpfxjitvdne Alyjh Max. workpiece width. 300 mm Quontity of mortising: 180 mm Max. working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 4900 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Ljdpfx Ajzyihuslyoah Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: used, functionality: fully functional, 2 TABLE MORTISER BALESTRINI MOD. 2CAP Laodpfex Rc Ursx Alysh

Condition: used, Double Camam portable saw, belt-driven, with 2 horizontal spindles and 3 vertical spindles, used Ljdpfx Alelxurmeyjah

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Features and Technical Specifications: - Drilling depth adjustment via a maintenance-free linear guide - Efficient and economical operation thanks to the quick-lift system; no more laborious cranking - Smooth-running, infinitely adjustable drilling unit - Height adjustment with fine tuning and a gas spring cylinder for weight compensation - Cross-travel and height adjustment with scales and adjustable stops - Vibration-free operation thanks to a robust steel construction - Drilling depth adjustable via a scale and stop - Drill head height adjustment can be fully utilized for vertical slotting - Large-dimensioned gray cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW Ledpfx Alszk Nlneyeah - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Swiveling drill head: -60° to 60° - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drilling table height: 830 mm - Dimensions: 1,200 × 1,050 × 1,300 mm - Weight: approx. 240 kg

Condition: reconditioned (used), Year of construction: 2005, MACHINING CAPABILITIES: - Mortise 30x30 mm, Max depth 150 mm - Vertical travel (Z axis) max 300 mm Adjustable via stops - Transversal adjustment (Y axis) max 300 mm (290 mm with fence) Front and handwheel adjustment - Longitudinal adjustment (X axis) max 300 mm Laedpfx Aljx Rz Dxeysh Manual with pneumatic clamping MACHINE CONFIGURATION: - Welded steel frame - 2m support table, 40cm support rollers Fence stop guide 2000 x h.110 mm 2 pneumatic workpiece clamps Working height 1m (adjustable) - Automatic lubrication unit per cycle OTHER CHARACTERISTICS: - Power supply 400V, 50Hz, Three-phase N+T, IN 16A - Installed power 3 kW - Dust extraction: 1 top port Ø95mm ext. for Ø100mm hose - Required pneumatic supply 7 bar - CE marking, lockable main switch - Overall dimensions (LxWxH): 2.10x1.10xh.2.20m - Weight 350kg

Condition: used, Bacci Double Mortiser with 1 Bit per Side Laodsuqw Scopfx Alysh

Condition: used, Bacci 1-Point Oscillating Mortiser Laedpfx Alowdfh Uoyjh

Condition: used, functionality: fully functional, number of spindles: 6, SECOND-HAND DRILLING/MORTISING MACHINE FOR RUSTICAL CHAIRS COMEC MOD. FM/SR 4+2 Lasdpfx Alox Rchloyeh

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Ledpfx Alo Adu A Aeyjah Manufacturer: Festo Type: PP Machine number: 6,237 Machine type: Chain feeder Electrical Data Operating voltage: 220–380 V Connected power: 2.2 kW Drive Data Speed: up to 2,800 rpm Working Area Chain width: approx. 50 mm MACHINE DETAILS Dimensions Length: 800 mm Width: 700 mm Height: 1,500 mm Weight Weight: 200 kg