Used Clamping Tower for sale (9,070)

Year of construction: 2002, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Duodpfxjnvfdqe Afpen

Condition: excellent (used), consisting of: Duedpjxauacofx Afpjn 2 pcs, item no. 47155: Makro Grip 125 centering vice, clamping range 155 mm 1 pc, item no. 41350: Extended stamping station 1 pc, item no. 41010: Center-marking device for stamping station 16 pcs, item no. 45570: Mounting pins, diameter 20 mm 1 pc, item no. 47520: Double mounting body 1 pc, item no. 47355: Makro Grip 125 centering vice, clamping range 355 mm 1 pair, item no. 44251: Avanti base jaws 4 pcs, item no. 44258.76: Top jaw 77x126mm for Avanti 125 4 sets, item no. 45570.10: Spacer for mounting pins, diameter 20 mm 2 pcs, item no. 47255: Makro Grip 125 centering vice, clamping range 255 mm 1 set, item no. 47355-TG27: Twin-Grip retrofit kit for Makro-Grip 125 no. 47355 1 pc, item no. 47520: Double mounting body 1 pc, trolley for stamping station

Year of construction: 2010, condition: used, Clamping tower Fabr.AMF Masse:600mmX600mmX1060mm Grid:50mm Duodpfxocum N Se Afpon Base plate:730mmX730mm

Year of construction: 2010, condition: good (used), 3.pieces.rigging tower Fabr.AMF Bj.ca.2010 Dimensions:6X500mmX1060mm( 6 corners ) Grid:50mm Base plate:700mmX700mm Piece price is 7500,-€ New price is piece 12 500,-€ at AMF Photo.pos.16 Djdpecum Iqefx Afpeun

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Dujdpfog Uf I Ajx Afpon Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Year of construction: 2010, condition: excellent (used), CAST MEASURING SPLETTE Dedpfx Aeg Uf Nksfpjun Fabr.STOLLE Type:GMP 6000 Bj.ca.2010 Dimensions: length 6000 mm width 2500 mm height 360 mm. Very good condition. Weight.about 16 000 Kg.

Year of construction: 2000, condition: good (used), Casting top plate make STOLLE Type:ASP 1610 Dusdpshcin Hsfx Afpjn length : 1610 mm width : 250 mm height : 60 mm T-slot for M16 Good condition.

Condition: excellent (used), Year of construction: 2004, T-slot clamping plate with frame MÜHLENBAUER Type: ASP 2240 Year 2004 in very good condition . Plate : 2240 mm X 2240 mm X 80 mm Frame : 2000 mm X 2000 mm Total height : 320 mm T-slots for M24 T-slot nut Weight : 2300 KG Duodpeq H Ectofx Afpsn

Condition: like new (used), Year of construction: 2010, Casting clamping angle Fabr.SAV Typ:AW71863 Bj.ca.2010 As good as new with 315mm Röhm chuck bore 100 mm Width : 500mm Depth : 310 mm Height without base plate: 550 mm Height with base plate: 585 mm Base plate : 500 mm X 400mm Center height : Chuck : 325 mm is hardly used Very good condition with chuck key . Duodpfx Aohcimwjfpjn

Condition: good (used), Year of construction: 1990, Clamping angle Fabr.AMF Type:1430 Year 1990 Duedpfsu Hgrxox Afpjn Clamping surface : L 1430 X H1130 XT1150 mm T-slot 24X40X40 mm in good condition .

Year of construction: 2005, condition: good (used), Wooden power chuck Dsdsgqxg Hepfx Afpjun Fabr.FORKARDT Type:3QLC/K250-72-Z8-S12-172005 Bore in chuck 72mm with clamping cylinder complete Year 2005 in good condition.

Year of construction: 1997, condition: excellent (used), Hydraulic system - clamping hydraulics For tool clamping - Clamping device Make:BACHOFEN HYDRAULIK Type:HA3B-L1/90 Year.15/1997 Tank : 3 L Clamping pressure :90 Bar In very good condition . Dodpemx Slzsfx Afpsun

Condition: excellent (used), functionality: fully functional, LANG MAKRO-GRIP 5-axis vice No. 46160 Clamping range: 0–160 mm 12 units available Additionally: 1 x LANG clamping device trolley Dedpfx Aeydc Udefpsun Capacity: 60 positions

Condition: ready for operation (used), A vertical upward clamping jaw elevator and a vertical downward clamping jaw elevator in stainless steel design are available. This is a conveyor system for overcoming height differences in production lines. Bottles, jars, cans and also cartons etc. can be conveyed upwards and downwards. (1) Upward elevator, output: 14,000 cans/h (empty containers open), speed: 25m/min, format diameter: 100mm, format height: 50-80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. (2) Downward elevator, output: 14,000 cans/h (empty cans open), speed: 25m/min, format diameter: 100mm, format height: 80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. On-site inspection is possible, were completely overhauled in the past. Djdsu Av Egspfx Afpoun

Year of construction: 2019, condition: ready for operation (used), An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible. Dsdpfx Ajv E Ragsfpoun

Condition: ready for operation (used), Year of construction: 1994, A Wolff tower crane, which received a major control repair in 2023, is available. Hoist power: 28kW, jib length: 50m, hook height: 37.5m, tower system/setup: KRE250, support base: 5m, central ballast: 50t, counterjib length: 14m, counterweight: 15700kg, control system: complete CCplus V82. Documentation available. An on-site inspection is possible. Dusdpfx Aex Aunlsfpsn

Year of construction: 2018, condition: ready for operation (used), A tower saw including an installation platform is available. Tower segment and pipe diameter range: 4400mm-7500mm, power consumption: 50kW. SP axis (main spindle): drive: 41kW, speed: 160rpm, torque: 224Nm. Z-axis travel: 130mm, X-axis power: 4kW, X-axis torque: 26Nm, X-axis travel: 3250mm, X-axis feed: 2m/min, saw blade diameter: 450mm, saw blade thickness: 4.5mm, saw blade weight: 4000kg. Total system dimensions X/Y/Z: approx. 8000mm/3600mm/2200mm, weight: approx. 9700kg. Documentation available. An on-site inspection is possible. Duedsw Nykaspfx Afpen

Year of construction: 2002, condition: ready for operation (used), Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Dodpfxeui R Smo Afpsun

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, empty load weight: 1,123 kg, opening width: 1,525 mm, Roll clamp Load center: 760 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Operational and fully functional Technical Condition: Very good Description: In addition to this device, we offer a wide range of forklifts and warehouse equipment. All our units are inspected and certified in accordance with FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also interested in purchasing your used equipment, even if you do not buy a machine from us. Lease-purchase and financing options are available upon request at attractive terms. We are happy to provide you with knowledgeable and comprehensive advice on our vehicles. Djdpfxoydf Ruo Afpjun

Condition: good (used), Year of construction: 1992, functionality: fully functional, cutting height (max.): 130 mm, cutting length (max.): 400 mm, overall weight: 1,400 kg, Monitored saw blade cover; Duedjyhy Elepfx Afpen cuts at 90° profile height 130 mm and profile width 400 mm, at 45° = 130 x 280 mm at 30° = 130 x 195 mm. Acute angle cutting at 30° right and left. - hydraulic material clamping vertically and horizontally - hydraulic stepless saw feed - clamping pressure adjustment - original Trennjaeger stops are available. .

Condition: used, tool clamping area 200x55x195 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ---- Djdpfogqg Ruox Afpeun

Condition: used, length 720 mm width 500 mm height 600 mm weight of the machine ca. 0,7 t Dujdpfx Asg A U Sxjfpon dimensions of the machine ca. 1200x640x600 m

Condition: used, length 720 mm Dedpfx Afeg A U S Aepoun width 500 mm height 700 mm weight of the machine ca. 0,7 t dimensions of the machine ca. 1200x640x700 m

Condition: used, table length 600 mm table width 600 mm Djdpfx Aod Ihbbsfpsun table load 0 t different clamping tables, former used on a HÖFLER measuring machine! As complete package or single table available.

Condition: used, tool clamping area 300x55x85 mm weight 0,01 t Djdpogqlkgjfx Afpjun - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ----