Clamping Units

Lenzkes MQ 200

Condition: excellent (used), Year of construction: 1993, spindle bore: 118 mm, turning diameter over bed slide: 635 mm, turning diameter over top slide: 390 mm, turning length: 2,000 mm, total length: 4,170 mm, total width: 1,960 mm, total height: 1,800 mm, spindle speed (max.): 1,250 rpm, swing diameter over cross slide: 390 mm, bed width: 480 mm, overall weight: 5,200 kg, Centre lathe Colchester 600 - MAGNUM 1250 MACH-ID 9464 Make: Colchester 600 Type: MAGNUM 1250 Year: 1993 Nwsdpfx Ajyuwwhskfof FAGOR 2 Axis Dro Feed all directions Conical turning attachment DBC Turning Length: 2000mm Swing over bed Ø: 635mm Swing over cross slide Ø:390mm Swing in the gap Ø: 900mm Gap length: 300mm Spindle bore: 118mm Spindle power: 22kW Bed width: 480mm Tailstock spindle Ø: 95Ø Stroke pinole: 190mm Spindle taper: 6Mk Speeds / ranges: 1250Rpm Length: 4170mm Width: 1960mm Height: 1800mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2003, condition: ready for operation (used), Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible. Nedpfxjxuvn Do Akfswf

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 8038938456C, turning length: 450 mm, turning diameter over cross slide: 505 mm, turning diameter: 202 mm, spindle motor power: 10,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, Gildemeister CTX 310 Heidenhain Turn+ The machine its full functional, but have some miner isue. Nwodpfowk E Uzjx Akfjf

Condition: good (used), Year of construction: 2000, max. ram stroke 2 - 300 mm groove width 2 - 32 mm power capacity 8 kW no. of strokes 2 - 300 Hub/min throat ca. 300 mm Max. installation height ca. 450 mm automatic feeds 0,01 - 0,15 mm work speed 0 - 30 m/min return speed 30 m/min weight of the machine ca. 2,2 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m The BALZAT keyway jointing machine is characterised by the following advantages: Njdpfx Akouayibsfswf - Infinitely variable adjustment of the jointing speed with constant return, even during the work process - Simple clamping of the workpieces with standard clamping devices, without additional tool holders - Extreme dimensional accuracy thanks to self-centring, centrally arranged blade holders - Feed rate can be changed during the programme sequence - Machine base is also a container for cutting oil - all components are easily accessible and replaceable

Condition: used, Year of construction: 2011, functionality: fully functional, DMG Gildemeister CTX 500 Alpha V6 - Year of manufacture: 2011 - Control: Siemens 840D shop turn - Counter spindle - With Y-axis and C-axis - Turret: 12-position motorized VDI 30 Additional equipment: - Hydraulic chuck - Chip conveyor - Coolant system Nwodpfx Aksylkuujfef - Interface for bar feeder - Workpiece catcher with conveyor belt

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm control Heidenhain Nsdpfx Akeyb S Ihofowf greates pass round over bed 380 mm total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated Nwedpoyffgrofx Akfef • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems here. The systems are in very good condition and fully functional. Inspection by appointment possible. Item 1 System 3R-203 Rotary Element WEDM 360° Item 2 System 3R-201J Adapter WEDM 90° Item 3 System 3R-201J Adapter WEDM 90° Item 4 System 3R-201J Adapter WEDM 90° Item 5 System 3R-202 MiniBlock Item 6 System 3R-202 MiniBlock Item 7+8 System 3R-204 Height Adjustment Adapter WEDM Item 9 System 3R-218/30S Holder Sets Item 11 System 3R-602.21 Manual Chuck Macro Item 12 System 3R-294.3 Vise Item 15 System 3R-293.3 SuperVice Item 17 System 3R-200-4J-2 470mm System 3R-200-4J-2 470mm Nodpfjxqn Ubox Akfswf System 3R-200-4J-2 330mm System 3R-200-4J-2 138mm Item 18 System 3R-239–545 0006-V01 System 3R-239–495 Shipping and inspection possible!

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Nedpfx Asxg Riaokfswf

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Nwodpfew U Uh Djx Akfsf Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,