Used Clay Brick Plant for sale (3,327)

Condition: good (used), HK Refrigeration Refrigeration set Consists of Friga-bohn twin fan evaporator and copland compressor Rcjdpfx Asqqhrajireh

Condition: good (used), HK Refrigeration Refrigeration plant Rcjdpfsqqiygjx Airjh

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications Rcsdez Hvmhopfx Airjh - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day - Basis-weight range: approx. 45–130 g/m² - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Condition: new, functionality: fully functional, Copper Granulators Copper Granulators All prices are net prices. - GM-S03: 4,200 Euros - GM-S05: 5,050 Euros - GM-S08: 7,700 Euros - GM-S15: 11,300 Euros Compact and powerful cable recycling machines for the efficient separation of copper and plastic. Capacity, depending on the model: 30–150 kg/h at 4.28–8.5 kW. Ideal for small to medium-sized recycling operations. Image 1 – Cable recycling plants Professional cable recycling machine GM-T500 High-quality system for the efficient processing and separation of cable material. Suitable for various types of cables and industrial applications. GM-T500: Copper wire granulator, up to approximately 300–400 kg/h, 34.15 kW Price: 55,640 Euros net Granulators GM-B200 to GM-D600 Robust machines for the professional shredding and processing of cables and metal materials. Various models with 1.5–11 kW motor power and different throughput and performance sizes. Ideal for recycling operations, cable processing, and industrial applications. Available models as per overview: All prices are net prices. • GM-B200 – 1.5 kW, 400 Nm 3,000 Euros • GM-B300 – 3 kW, 1,628 Nm 4,840 Euros • GM-B400 – 4 kW, 2,919 Nm 6,780 Euros • GM-B500 – 7.5 kW, 4,574 Nm 8,940 Euros • GM-B600 – 11 kW, 8,500 Nm 12,860 Euros • GM-D400 – 2 × 4 kW, 5,800 Nm 8,900 Euros • GM-D500 – 2 × 7.5 kW, 9,148 Nm 12,200 Euros • GM-D600 – 2 × 11 kW, 25,000 Nm Rcedpfx Aiez Eil Usrsh 16,520 Euros

Condition: used, Year of construction: 2016, 2 identical thermal oil boilers for industrial process heat supply are offered. Equipped with: attached burner system, thermal oil piping connections, circulation/pump components, valves and monitoring devices, insulated piping, stainless steel cladding, integrated viewing/inspection area at the boiler front. Inspection possible by appointment. Rsdpfx Aiez Ibx Ssrjch

Condition: refurbished (used), Year of construction: 2023, operating hours: 2,048 h, functionality: fully functional, power: 310 kW (421.48 HP), year of last overhaul: 2026, Equipment: Standard Inventhor 6 package: Load-Sensing system Fuel tank, 500 liters Longitudinal conveyor belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system – additional electric pump for operating the following functions when the engine is stopped: raising/lowering/tilting the rear conveyor belt, opening/closing the comb flap, opening/closing the comb, raising/lowering the folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder tool box acoustic start-up warning Doppstadt telematics system Paint: RAL 2011, traffic orange Additional equipment: Drive train 310 kW - EV 400 mm chain track unit Size L shredding system chute extension 350 mm, watering system, left side rear conveyor belt 4.9 m over-belt magnet, neodymium frame for over-belt magnet * DoppBasket system can be retrofitted! * Rcjdpfx Aiezqrr Djreh Delivery date to be agreed.

Condition: used, Year of construction: 1999, A complete screw manufacturing factory with 8 production lines is available for sale. The facility is designed for the industrial production of wood screws, metric screws, and inch screws. The factory includes all necessary machinery covering the entire production process – from wire processing and cold forming to thread rolling and finishing operations. A large inventory of spare parts is also included to ensure long-term operation and maintenance of the production lines. Machinery Overview Thread Rolling Machines 1 × Charng Guey CGR510 4 × Hilgeland thread rolling machines (Year 1987–1992) 1 × Hilgeland (Year 1959) 2 × EWM (Year 1986 / 1989) 1 × Malmedi thread rolling machine 1 × Hilgeland Ronsdorf Pointing Machines Rsdpfoztfvujx Airech 6 × ME10 2 × ME12 Cold Heading Machines / Presses 3 × Sacma 31 (Year 1984 / 1985 / 1986) 1 × Sacma 21 (Year 1984) 2 × Klose MTH 250 1 × Omega 122EM 1 × 5-stage press Jern Yao JBF-17B5SL Deburring Machines 2 × AAG12 4 × AAG10 Centrifuges 10 × units Key Advantages Complete screw production facility Production of wood screws, metric screws and inch screws 8 production lines Large spare parts inventory included Ready for industrial mass production Further technical details and inspection available upon request.

Condition: used, Applicable material: Concrete A POLYGONMACH PCC60 60 M3 compact concrete batching plant, if high quality and well designed, can provide users with many advantages: 1. Thanks to its high production capacity, it provides a fast supply of concrete used in large and complex construction projects. 2. Depending on its technical characteristics, especially mold, pump, etc. When used, it simplifies the concrete pouring works and speeds up the works without sacrificing quality. 3. Thanks to the automatic control systems, the concrete quality is ensured at a consistently high level. This ensures excellent results in construction projects. 4. Thanks to its compact design, it takes up little space and is easy to transport, install and disassemble. Thus, users can quickly move these exchanges from one place to another. 5. With energy efficient and environmentally friendly design options, operating costs are lowered, thereby saving more money for users. 6. If properly cared for, it is long lasting and generally delivers a high quality product. Because of all this, a high-quality and well-designed compact concrete batching plant with a capacity of 60 M3 is preferred by construction companies and contractors. Rcedpfx Asymkatsirsh A POLYGONMACH 60 M3 compact concrete batching plant can use different types of additives, cements and aggregates depending on its type and properties. These factors determine the desired properties of concrete. Cement: The cements generally used in concrete batching plants are ordinary ported cements, blast furnace slag cements and reactive powder additive cements. These different types of cement can change various properties of concrete. Mobility: stationary Other characteristics: compact, automatic Capacity: 60 m³/h(2,118.88 ft³/h)

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® GS COMPACT is a robust and efficient solution for separating and classifying coarse material in various industries, such as mining, construction, and recycling. Utilizing strong, evenly spaced parallel bars, the Grizzly Screen separates larger particles and rock fragments while allowing finer material to pass through. This ensures effective material processing and prevents unnecessary wear on downstream equipment. Technical Specifications: - System capacity: 65 t/h with springs, 60 t/h without springs - Maximum bucket width: 2.9 m - Screening area: 4.9 m² - Weight: 1120 kg - Width: 3.2 m - Length: 2.85 m Rodpfx Aiswhmq Esrsch - Height: 2.7 m - Loading height: 2.56 m Options: - Outriggers with springs - Outriggers without springs

Condition: new, Year of construction: 2026, Belts and Accessories We offer top-quality conveyor belts suitable for all common screening machines and shredders. Custom-made to your specifications, we guarantee reliable performance and long service life. Suitable for Screening Machines - Doppstadt SM 518 / SM 618 / SM 620 / SM 720 - Terra Select T4 – T7 - Komptech Max - Mustang and other models Suitable for Shredders - Doppstadt Bison / Buffalo / Mammoth, Biopower, Inventhor - AK 430 / 510 / 635 - and other popular models Technical Features & Versions - Length: unlimited, tailored to customer requirements - Width: up to 1,800 mm - Number of plies: 2, 3, or 4 as required - Various profiles for optimal conveying performance - Steel cord quantity: 10 cm / 35 ±1 - Various material thicknesses available Your Advantages Rsdpfjyg D S Nex Airjch - Custom manufacturing according to your specifications - Superior quality for maximum service life - Short delivery times for rapid availability - Reliable performance for all common machines Contact us for a tailored quote and advice on conveyor belts for your application.

Condition: new, functionality: fully functional, fuel type: hydrogen, color: other, Year of construction: 2026, Equipment: cabin, The fixed sand washing and screening plant is an advanced system designed for the high-efficiency separation and cleaning of natural sand and gravel. Developed with CONSTMACH engineering, these plants can be customized according to different production capacities, final product sizes, and washing requirements. Thanks to the plant's modular design, it can be easily integrated into any project area with different layout plans. It offers flawless washing performance with options such as a high-vibration feed bunker, a washing nozzle vibrating screen, and a helical or bucket washer. The hydrocyclone system ensures maximum efficiency in separating fine material. Furthermore, thanks to the PLC-controlled automation system, all processes are managed from a single point, minimizing the margin of error. CONSTMACH stationary sand washing and screening plants are equipped with SIEMENS and SCHNEIDER brand electronic components, offering long-term use and high durability. With these features, they are an ideal solution for companies that want to maintain high quality standards in aggregate production. Stationary Washing and Screening Plant Technical Specifications Production Capacity: 100 – 250 t/h Maximum Feed Size: 200 mm Feed Height: 4.5 meters Main Configuration: Feed Bunker + Washing Nozzle Vibrating Screen + Helical Washer / Bucket Washer / Dewatering Screen and Hydrocyclone + Conveyor Belts Total Motor Power: Varies according to production capacity Electric Generator Requirement: Varies according to production capacity Weight: Varies according to production capacity Why Should You Choose CONSTMACH Stationary Washing and Screening Plants? Redpfoxpxqqsx Airjch CONSTMACH combines its long-standing engineering experience in washing and screening technologies with high quality standards. All systems provide long-term use with low maintenance costs thanks to their durable steel construction and energy-efficient motors. In addition, with project-based customization options, it offers full compliance with each customer's production goals. Thanks to its superior service network and fast spare parts supply, CONSTMACH plants preserve the value of your investment in the long term. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach single shaft mixers has been designed for ready mix concrete nad other type of concrete types prodcution from c10 to c40. Its robust helical design enables its low problematic, low maintenance necessity, low abbrasion rate, longlife span. Paddles, pallets and helical arms made from ni-hard 25mm width, body and side wearing plates made from 10mm hardox 400 plates. Discharge covers are controlled by pneumatic or hydraulic which can be managed by Scada-PLC software. From 0,5 to 2 m3 capacity is available. Polygonmach single shaft mixers offers its customers with automatic lubrication systems, easy lubrication bar to multiple points, top cover for several applications. Polygonmach in contrast to competitors gives you %100 flexible design and customer based projectsü, multiple hopper and mixer design is available. Rjdpox A R Emjfx Airsch Motor type: hydraulic Mobility: truck-mounted Other characteristics: automatic, single-shaft Capacity: Max.: 2 m³(70.6 ft³)Min.: 0.5 m³(17.7 ft³)

Condition: new, Year of construction: 2026, HIGH RANGE TECHNOLOGY AT THE LOWEST PRICE IN THE MATKETPLACE, DON'T MISS THE CHANCE. CUSTOMER SATISFACTION IS OUR MAIN TARGET CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. GENERAL TECHNICAL SPECIFICATIONS Plant type: Mobile concrete plant with Bunker Feeding and Horizontal shaft mixer Plant Capacity : 120m³ / hour compressed fresh concrete Rcsdpew Sv Ndjfx Airjh Mixer Capacity : 3000 Liter (3m³ Compressed Concrete) Mixer Type : Double Shaft Mixer Total Motor Power : 180 kw Standard Value. It may vary depending on the equipment. Voltage / frequency : 380V / 50Hz Standard Value Electronical equipment : Siemens Other equipment & accessories : Italy / Germany Automatic lubrication system (ILC : ITALIAN) ALL IN ONE (with software package), printer, uninterruptible power supply and SCADA software package, all control and monitoring processes, all kinds of reporting, failure notifications, etc. This process is done on the computer screen and with animation support. FOR MORE INFORMATION PLEASE CONTACT US NOW Whatsapp / Viber

Condition: refurbished (used), Attachment shredder for mobile EXTEC screening machine e.g. for EXTEC 5000S, Turbo, Turbotrac, S-Series) Rcjdpfxsu Dhkdo Airjh for pre-shredding cohesive/clumpy material

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® SD COMPACT screening drum is constructed from a robust, foldable structure and is a semi-mobile machine. The screening drum is used for screening coarse materials such as soil, gravel, wood chips, various waste, and chip bundles, making it ideal for the recycling industry. The screening drum can also be upgraded with a bunker and an extension. This creates a system with a bunker belt that can be operated in both directions, is quickly interchangeable, and features fully electric control. In conjunction with the extension, we gain additional screening area and the option of a third fraction. It's worth mentioning that the drum can be changed on both the screening drum and the extension. There are seven different drums available for the screening drum and four different drums for the extension. Technical Specifications: - Drum length: 2.1 m - Usable drum length: 1.7 m - Drum outer diameter: 1.3 m - Usable screening area: 7 m² - Bucket width: 2.3 m - System capacity: 20 - 50 t/h - Mesh size: Ø6 - Ø100 mm - Hopper opening: 2.24 x 0.85 m Rcodpfsr Akndox Aireh - Speed (adjustable): 5 - 20 rpm - Drive power: 400V / 5.5 kW (optional 7.5 kW) - Filling height: 2.55 m - Weight: 1500 kg - Length: 3.34 m - Width: 2.36 m - Height: 1.95 or 2.92 m (with support) Options: - Vibration motors for emptying the hopper - Drum rotation in both directions - Six different drum variants - Cleaning brush - Easy drum replacement - Two-wheel drive - Hour meter

Condition: good (used), HK Refrigeration Refrigeration plant Rcedeqqix Uspfx Airoh consist of twin fan evaporator and Copeland compressor

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, warranty duration: 12 months, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Complete powder coating system (curing oven 3.2m + spray booth + Wagner/Gema application + conveying system) Like-new, complete powder coating system including a 3.2m electric/gas curing oven, mobile spray booth, Wagner or Gema application + hanging conveying system (200 kg). Ready for immediate use and flexibly expandable! Customer-specific adjustments possible upon request. Maximum flexibility and efficiency for your surface coating Are you looking for a reliable, high-performance, and immediately usable complete solution for powder coating? This complete powder coating system combines top-class industrial components into a perfectly coordinated overall system. Whether for single-part production, small series, or contract coating – the system offers you the ideal combination of high coating quality, low energy consumption, and well-thought-out material flow. The heart of the system is the generously sized electric or gas curing oven with a usable space of 3.20 x 1.40 x 2.00 [m]. The indirect heating via the integrated stainless steel thermal block and the powerful air circulation ensures excellent, homogeneous temperature distribution, which reliably prevents coating defects. The system is complemented by a mobile spray booth, which guarantees maximum flexibility in the hall area due to its design. Together with the proven Wagner/Gema handheld unit, you can apply a wide variety of powder coatings (from standard organic to metallic) precisely and economically. The included C-rail system, with its approximately 27 meters in length and a load capacity of 200 kg per carrier, ensures smooth, ergonomic transport of your workpieces between coating and curing. Important: Does the system not fit 1:1 into your hall? Individual adjustments are possible! Each production facility has its own requirements regarding space, component sizes, and processes. This system can be flexibly adapted to your specific conditions on site. - Tailored dimensions: Oven dimensions or booth sizes can be modified on request. - Expansion of the conveying system: Adjustment of the rail system (layout, switches, usable lengths) to your hall geometry. - Special equipment: Integration of additional components such as pre-treatment, extended control technology, alternative heating methods, or a higher degree of automation. Just contact us! We will examine your layouts and put together a customized configuration for you. Technical data (quick overview) - Condition: New / Unused - Oven interior dimensions (L x W x H): 3,225 x 1,400 x 2,000 [mm] - Max. oven temperature: 220°C - Oven heating capacity: 39 kW (electric or gas, indirect via stainless steel thermal block) - Oven air circulation capacity: 4,500 m³/h Rjdpfob Dxnwex Airech - Spray booth dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Booth extraction capacity: 6,000 m³/h; 3 kW - Conveying system: Manual rail system (C-rail, max. 200 kg / carrier) - Powder gun: WAGNER or GEMA Your contact person & contact Do you have questions about the system, would you like a technical data sheet/offer, or would you like to check how the system can be optimally integrated into your production chain? Contact us now without obligation! We will be happy to advise you on technical details, customization options, and delivery conditions.

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Rcedpfxob Ny Eyo Airsh Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 700 kg, temperature: 220 °C, heating capacity: 150 kW (203.94 HP), workpiece height (max.): 2,500 mm, workpiece length (max.): 6,000 mm, Equipment: lighting, Complete powder coating system including pre-treatment, curing oven, conveying system, and assembly For sale is a powerful, well-designed, and fully coordinated complete powder coating system for highly professional coating processes. The system covers the entire manufacturing process – from thorough surface preparation (3 zones) to precise powder application and reliable thermal curing. (Note: A customized design of the system according to customer requirements is possible upon request!) Key data & technical specifications: - Machine type: Powder coating system / complete system - Condition: New machine - System components: - Combined booth for manual/automatic pre-treatment - Walk-in powder coating booth - Powder curing oven - Manual conveying system - Powder gun - Electrical control system including installation - Usable dimensions (oven / booths): Component dimensions up to L x W x H: approx. 6,000 x 1,500 x 2,000 mm - Oven power / connection value: Design depending on the type of heating (gas / electric) and dimensioning (e.g. approx. 80–150 kW electric or a correspondingly designed gas burner) - Scope of supply: Complete system including on-site assembly Detailed overview of the included system components: 1. Combined pre-treatment booth: - Designed for both manual and automatic pre-treatment steps. Ensures optimal cleaning, degreasing, and application of a primer to the workpieces as a basis for durable coating results. 2. Walk-in powder coating booth: - Ergonomically designed, walk-in booth structure for maximum freedom of movement during coating. Enables efficient powder recovery, quick color changes, and a clean working environment. 3. High-performance powder curing oven: Rsdpfxsbhh Awo Airjch - Uniform heat distribution for homogeneous curing of the powder coatings. Designed for high energy efficiency and stable process temperatures. 4. Manual conveying system: - Robust and flexibly usable transport system for the safe flow of materials between pre-treatment, coating, and curing oven. 5. Ergonomic powder gun: - Modern application technology for uniform powder application, high transfer rates, and first-class surface quality. 6. Central control & electrical system: - Complete electrical control system including wiring, control cabinet, and complete on-site installation, ready for operation. Flexibility & Customization Every manufacturing operation has specific requirements for space, component sizes, and throughput. All components and dimensions of this system can be flexibly adapted to your individual operational conditions and customer requirements. Please do not hesitate to contact us to discuss special dimensions, modified conveying systems, or extended levels of automation.

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Rodpfx Aisupzmuoroch Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 09/2027, overall weight: 540 kg, empty load weight: 540 kg, input frequency: 50 Hz, Eberhardt RuLa Universal ST Manual control Machine is mobile and features a locking mechanism Possible weight ranges: Option: 150-1500g / 450-2500 g Simple, robust technology! Connection: 400V, 16A CEE plug Dimensions: 820 x 1000 x 1550 mm (W x D x H) Rcedpszq U Alofx Airjh Used machine

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Rjdez Ik Aaepfx Airech Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.

Condition: used, Year of construction: 2009, functionality: unexamined, power: 196 kW (266.49 HP), total height: 2,570 mm, total length: 3,500 mm, total width: 1,200 mm, 2G / WEIER Gas CHP – Engine/Generator Set Gas-powered combined heat and power plant from 2G. The unit is housed in a soundproof enclosure and features a gas control system, heating and engine circuits, and a heat exchanger. Unit/Engine: WEIER Type: GEN.DASGM 250/4L Year of manufacture: 2009 Voltage: 400 V Frequency: 50 Hz Rated current: 400 A Power: 196.0 kW Speed: 1,514 rpm Power factor: cos φ 0.86 Protection class: IP54 Rcsdpfx Aijzzbhpjrsh Insulation class: F Max. ambient temperature: 70 °C Max. operating pressure: 6 bar Marking: CE / EN 60034/05 Ignition system: Manufacturer: Altronic Inc. Type: CD200 – Programmable Ignition P/N: 791070-6 S/N: 3218 Supply: 12–24 V DC Max. ambient temperature: 105 °C Location: Neuenkirchen-Vörden, Germany An inspection of the unit is possible after prior arrangement. If you are interested or have any technical questions, please feel free to send us an inquiry. We will provide you with further information and documents upon request.

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality Rcodpfszz Sugjx Airsh • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us. Rcsdpjz Ehc Eefx Aireh