Used Filtration Plant for sale (4,135)

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit Blsdpfsrai N Asx Aktep - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Condition: used, Year of construction: 1993, Additional title: Microfiltration Material: stainless steel Base construction: on stainless steel frame with feet Features: 32 filtration modules, pumps, pipes, valves, control cabinet Bljdpfjztwz Nox Aktjp

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Additional title: Complete filtration system with buffer tanks and dosing for filter aids Filtration capacity: 18000 l/h Material: Contact surfaces from stainless steel Bodpfx Aszizq Tjktslp Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors

Year of construction: 1986, condition: used, PVPP filter for beer filtration. The system is sterilised by filling the dosing tank with hot water and flushing it with the PVPP tank in a circuit. Finally, the system is rinsed with cold water. After filtration, the PVPP is regenerated with lye. The system consists of the following components: - Stainless steel filter housing, 18.8 hl, upright, closed with clamping screws - Upright agitator tank for mixing PVPP with manhole on the top of the tank - Plate heat exchanger - Various pipes, pumps, valves, measurement technology - Control cabinet with user interface Additional title: beer filtration Filtration capacity appr.: 20000 l/h Gross volume filter housing: 1880 l Max. overpressure filter housing: 6 bar Operation / Control: VIPA 300S+ Bljdpfoxzqursx Aktjp Material: Filter housing made of stainless steel 1.4541 (AISI 321) Features: Filter housing; mixing tank; plate heat exchanger; various pipes, pumps, valves and measuring technology; control cabinet

Condition: good (used), Year of construction: 2009, Section of Double-Stage Reverse Osmosis able to treat about 60 mc/g of product Bedpfx Aketv Drlstolp

Year of construction: 2009, condition: good (used), Section of tubular ultrafiltration able to treat about 36 mc/g of product Bledpfx Aetv Dx Eoktsp

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Press: Medium pressure 20 bar Bledpfxjhqhw Is Aktjp Retentat flow: 1200 l/h

Condition: used, Kieselguhr plate filter, 60 x 60 cm with 35 frames and 34 plates, manual pressing. Complete filtration plant consisting of: - kieselguhr plate filter - kieselguhr dosing vessel with agitator - kieselguhr dosing pump - feed pump - flow meter Blodpfx Ajxbpiujktjp Additional title: Frame filter with agitator tank, dosing pump, feed pump and flow meter Number of frames: 35 Number of plates: 34 Length: 4,7 m Width: 0,8 m Height: 1 m Weight: 2500 kg

Condition: like new (used), functionality: fully functional, fuel type: electric, Year of construction: 2020, Used crushing and screening plant for sale, backed by the Fabo guarantee; fully maintained and ready for operation. Suitable for processing soft to medium-hard stone, with a high production capacity for sand-rich output. Our plant consists of the following components: 30 m³ rock feed hopper PDK-140 primary impact crusher Cubitzer Impact crusher (secondary) 120-series tertiary crusher 2000x6000 mm vibrating screen 800x4000 mm conveyor belt 800x20000 mm conveyor belt 800x12000 mm conveyor belt 600x15000 mm conveyor belt 600x10000 mm conveyor belt 600x10000 mm conveyor belt Bodpj Ahn Txjfx Aktjlp

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Screen Media : Punch Plate, Grizzly, Bofors Bsdpfx Aezfp Daektolp - *Weight : 31.000 kg - *The screen angle varies between 18-27°.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. Blsdpeq Nyuvjfx Aktep 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Year of construction: 2007, condition: used, functionality: fully functional, DANTHERM NFZ 3000 Dust Extraction / Filter Unit – 9,000 m³/h Reliable and high-capacity dust extraction (air filtration) unit for sale, suitable for woodworking, furniture manufacturing, and other industrial applications. Technical Specifications: Filter area: approx. 150 m² Model: NFZ 3000 Year of manufacture: 2007 Collection bags: 6 pcs. Fans: 3 pcs. (3 sections) Airflow capacity: approx. 9,000 m³/h Inlet connection: Ø 630 mm Bledpfx Akszlgm Ejtep Dimensions: Length: 3,600 mm Width: 2,400 mm (+ approx. 1,000 mm fan overhang) Height: 5,400 mm The unit is designed for efficient collection of dust and wood shavings and is suitable for a wide range of industrial production facilities. It features a robust construction and is easy to maintain. Condition: Used (fully operational) Price: Negotiable

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. Bsdpfx Akeq Ngb Djtslp 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Bledpfx Akozz Ax Ajtjp

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. Bledpfxozwf Ewj Aktop • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm • Mobile three-decks screen • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Bljdpfx Aoy Hk Daoktjp

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1F12DOV1.4, COMAT X99 The Comat Superfiltration system is a professional plant for microfiltration of coolant and machining fluids, designed to operate in a closed-loop with CNC machines. Bledpfe Adl Tljx Aktop Technical data Model: 1F12DQV1.4 Weight: 820 kg Power: 7.5 kW Year of manufacture: 2006 Fluid circuit capacity: minimum 800 liters, maximum 1,200 liters Overhauled by a Comat technician in 2020 What is this machine exactly used for? 1. Deep, real-time microfiltration: removes fine chips, sludge, and metallic particles from the oil and emulsions, with filtration that can reach 3 µm or even lower values. 2. Maintenance of coolant cleanliness and properties: helps to preserve the quality of the emulsion and reduce the risk of bacterial proliferation and deterioration of the machining oil. 3. Cooling and thermal stabilization: it is equipped with an integrated cooling system that helps prevent overheating of the oil or coolant. 4. Continuous operation in bypass and closed-loop: the system can be connected directly to grinding machines, filtering the fluid during the production process without having to stop the machines. 5. Simultaneous connection to up to 4 machines. 6. Fluid circuit capacity: minimum 800 liters, maximum 1,200 liters. Benefits for your plant - Economic savings: significantly extends the life of the oil or emulsion, reducing the frequency of replacements and disposal costs. - Protection of tools and machines: clean coolant helps reduce wear on grinding wheels and grinding machine pumps. - Higher machining quality: reducing the micro-contaminant particles in the coolant helps improve the surface quality of the machined parts.

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Bodpez E Rv Usfx Aktslp Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, year of last overhaul: 2021, space requirement height: 8,000 mm, space requirement length: 37,000 mm, space requirement width: 35,000 mm, Equipment: documentation/manual, AUTOMATIC MOLDING AND GREEN SAND PREPARATION PLANT Plant manufactured in the 1990s by Italian Foundry Automation. Over the years, it has undergone continuous upgrades, including equipment overhauls, technological improvements and digitalization. The latest electrical system overhaul was completed in 2023. Machinery and safety systems have been continuously maintained and updated, with a focus on production quality, process control and compliance with applicable regulations. Technical Specifications: - Production capacity: 20 complete moulds/hour - Moulds in circulation: 90 - Pallets in circulation: 95 - Core-setting capacity: 6 lower mould halves + 5 upper mould halves - Minimum cooling time: 1.5 hours - Sand consumption: 70 t/h Main Components: - Speed Muller 100B mixer, with a production capacity of up to 120 t/h. - GRF 12-750 fluidized bed cooler, equipped with temperature and humidity sensors. - JOST TWFE 1600 × 8000 continuous vibrating shake-out unit. - Adiabatic shock-wave moulding machine. - DISA in-line control system for continuous process adjustments. - Sand handling system, including belt conveyors (Approx. 280 m), storage silos Bedez Rna Nspfx Aktjlp The plant can be inspected on site by interested parties, subject to prior appointment and mutual agreement.

Condition: used, DAF Plant Bedpjy Au Arjfx Aktslp Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, At FABO, we design and install stationary type stone crushing and screening plants tailored to meet our customers’ specific requirements. The production capacity of our stationary plants varies between 100 and 1000 tons per hour. Crushing & Screening Plant with 250–350 TPH Capacity: • TBX-35 / Vibrating Feeder Bunker – 1 unit • TE-1430 / Intermediate Screen (1400x3000 mm – 2 decks) – 1 unit • PDK-130 / Primary Impact Crusher – 1 unit • TE-2060 / Washing Screen (2000x6000 mm – 3 decks) – 1 unit • TK-100 / Tertiary Crusher – 1 unit • TE-2060 / Vibrating Screen (2000x6000 mm – 3 decks) – 1 unit • Hydraulic Unit for TK-100 • Hydraulic Unit for PDK-130 • Conveyor Belt System (widths: 1000 mm, 800 mm, 650 mm) • Control Cabin, Electrical Panel, Control Panel, and Automation System All our products are manufactured with great care and come with a 1-year warranty. Bljdpfxjyzxctj Aktjp Installation and Operator Training are FREE of charge! FOR MORE INFORMATION, PLEASE CONTACT US!

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, As Constmach, we develop mobile asphalt plants that offer flexibility, speed, and efficiency in infrastructure and road construction projects. Thanks to their portable design, our mobile plants can be easily transported from one project to another, minimizing time loss by enabling quick setup. With an average production capacity of 60 to 160 tons/hour, these plants have the power to produce asphalt of equivalent quality to fixed plants. Their compact design, integrated chassis system, and advanced automation equipment both simplify production processes and increase field efficiency. Key Features: Bedpfx Akoxpyhdetslp High Capacity: 60–160 tons/hour production capacity for solutions suitable for projects of different scales. Flexible Design: Modules that can be customized according to project requirements. Quick Installation: Can be put into operation in a short time without requiring site preparation. Advanced Control Systems: Precise and error-free production with a PLC-based fully automatic control unit. Constmach mobile asphalt plants combine speed, quality, and efficiency in one package. With their easy transportability, energy-efficient production, and long-lasting components, they are your most reliable partner in asphalt production. Choose Constmach mobile asphalt plants to quickly start your projects and make a difference in quality asphalt production! Why Constmach Mobile Asphalt Plants? Superior Quality: All main components are manufactured from high-strength materials and can be used safely for many years. High Efficiency: Ensures consistent production performance in all conditions thanks to advanced heating, mixing, and dosing systems. Environmentally Friendly: Offers environmentally conscious production with bag filter systems featuring low emission values. Easy Transportability: Its modular and compact design allows for easy transport on trucks or trailers. Customer Support: We are with you every step of the way, from pre-sales engineering planning to after-sales technical service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Blodpfx Aexpfuiektep Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, As Constmach, we develop mobile asphalt plants that offer flexibility, speed, and efficiency in infrastructure and road construction projects. Thanks to their portable design, our mobile plants can be easily transported from one project to another, minimizing time loss by enabling quick setup. With an average production capacity of 60 to 160 tons/hour, these plants have the power to produce asphalt of equivalent quality to fixed plants. Their compact design, integrated chassis system, and advanced automation equipment both simplify production processes and increase field efficiency. Key Features: High Capacity: 60–160 tons/hour production capacity for solutions suitable for projects of different scales. Bjdpfxexp Utne Aktslp Flexible Design: Modules that can be customized according to project requirements. Quick Installation: Can be put into operation in a short time without requiring site preparation. Advanced Control Systems: Precise and error-free production with a PLC-based fully automatic control unit. Constmach mobile asphalt plants combine speed, quality, and efficiency in one package. With their easy transportability, energy-efficient production, and long-lasting components, they are your most reliable partner in asphalt production. Choose Constmach mobile asphalt plants to quickly start your projects and make a difference in quality asphalt production! Why Constmach Mobile Asphalt Plants? Superior Quality: All main components are manufactured from high-strength materials and can be used safely for many years. High Efficiency: Ensures consistent production performance in all conditions thanks to advanced heating, mixing, and dosing systems. Environmentally Friendly: Offers environmentally conscious production with bag filter systems featuring low emission values. Easy Transportability: Its modular and compact design allows for easy transport on trucks or trailers. Customer Support: We are with you every step of the way, from pre-sales engineering planning to after-sales technical service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much! Bledpfx Aezw Apgektop