Used Cmc for sale (23)

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Iisdpfsy Sfb Rsx Af Teb Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Power supply: 380 V Weight: 250 kg Made in Italy.

Year of construction: 2024, operating hours: 500 h, condition: excellent (used), functionality: fully functional, AR30PROP-AVH Technology AIRLESS Guns: 2 Dimensions 1500x710x h980 mm Weight 162 Kg Additional: Gun wheal Laser guide Graco 2000 (green laser) Electric engine HONDA GXE2.0 2,4 HP (1,8 Kw) Hand push Iodpjya Eccefx Af Teib Airless hydraulic piston pump 6,17 l/min 2 removable paint gun with nozzle for line 10-15 cm High-pressure paint filter Swivel front wheel Battery charger Additional battery as original.

Condition: ready for operation (used), CMC MTE2620-169BF PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Iijdpfsi D Hn Ajx Af Teb

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Iijdpfx Afoi D Hnme Tob

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) Iiedpfx Afev D If Do Tsb 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Isdoywdtvjpfx Af Tsib Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 3364, product length (min.): 100 mm, product width (max.): 350 mm, product width (min.): 120 mm, product length (max.): 250 mm, production capacity: 10,000 unit/h, TECHNICAL DETAILS Min. format: 100 mm x 120 mm Max. format: 250 mm x 350 mm Maximum parcel thickness: 30 mm Film thickness: 20 to 100 µm Maximum speed: 10,000 / h Iijdpfx Afeyzpvwj Tob MACHINE DETAILS Voltage: 380 V, 3F+N+PE Frequency: 50–60 Hz Current consumption: 21 A Air pressure: 6 atm EQUIPMENT 1 mail feeder shuttle 3 rotary feeders Film packaging section Conveyor belt

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, We have a CMC PRATICA poly foil wrapping machine available. Year 2009, used. Configuration: 1 mail feeder shuttle, 3 rotary feeders, foil wrapping section, conveyor. Minimum: 100 x 120 mm. Maximum: 250 x 350 mm. Max mailpack thickness: 30 mm. Foil thickness: 20–100 microns. Maximum speed: 10,000 pieces per hour. Isdoxlgp Topfx Af Tjib

Year of construction: 2006, condition: like new (used), Built in 2006 Condition like new! Ijdpfxjd Hr Ncs Af Teib

Condition: excellent (used), Year of construction: 2023, operating hours: 692 h, fuel type: hybrid, color: blue, Weights Empty weight: 2.593 kg Functional Iodpfx Afoymyaie Tsib Mast: articulated arm Lifting capacity: 230 kg Working height: 1.800 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 1115 m Transport dimensions (LxWxH): 5,3x0,78x1,95 Production country: IT Additional information Please contact Vink Machinery for more information CMC S 18F Spider Lift * 2023 * Diesel and 230-volt drive * 692 working hours * Remote control * Automatic outrigger * Adjustable undercarriage * 18-meter working height * 11.15-meter horizontal reach * 230 kg lifting capacity * 2593 kg net weight * Includes documents

Condition: used, Year of construction: 1994, Kreuzleger - Stacker CMC ROBOT 300 PMCYear 1994 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Iiedpfoh Ax Hiex Af Teb On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, collet bore: 35 mm, saw blade diameter: 500 mm, overall weight: 4,500 kg, table length: 4,000 mm, positioning accuracy: 1 mm, table width: 150 mm, working range: 4,000 mm, pressure: 6 bar, type of input current: AC, total height: 1,300 mm, total length: 4,000 mm, total width: 1,500 mm, cutting width (max.): 150 mm, cutting diameter: 500 mm, extraction nozzle diameter: 135 mm, machine base height: 4,500 mm, empty load weight: 4,500 kg, operating pressure: 6 bar, counter spindle motor power: 5,500 W, CMS Scarpari Aut cube cutting machine for pallet production. Still avalable to examine in production. Ijdjyr Hyyepfx Af Tsib Max cubes 135x150 mm min cubes 60x50 mm

Year of construction: 2001, condition: like new (used), flader brushing machine CMC futura bold x 2 6 agergate Iisdpfxsi A Ivyj Af Tob WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 brushing machine flader CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 WIDTH 1200 mm smooth feed adjustment inverters

Condition: used, Year of construction: 2010, Used Revised Air Compressor CMC CWA11-800 40 bar General Features of the Used Air Compressor CMC CWA11-800 40 bar The Used Air Compressor CMC CWA11-800 40 bar delivers high performance as an oil-free, three-stage unit, ideal for industrial environments that require high-quality compressed air. CMC manufactured this model in 2010 for air compression systems operating at up to 40 bar of working pressure. Since the unit uses dry-running cylinders, it eliminates the need for internal lubrication. Therefore, operators can use it in critical applications where they must avoid any air contamination. Moreover, its robust design ensures long-term durability and operational consistency. Technical Operating Specifications The Used Air Compressor CMC CWA11-800 40 bar operates with three cylinders across two compression stages. It draws air at atmospheric pressure and functions in ambient temperatures ranging from +1 to +35 °C. Consequently, the unit suits various environmental conditions. The system delivers an intake flow rate of 800 cubic meters per hour and reaches a maximum pressure of 42 bar. In addition, a 132 kW (180 HP) three-phase electric motor powers the compressor at 710 revolutions per minute, running on 400 Volts and 50 Hz. As a result, the compressor provides high efficiency and reliability, even under demanding workloads. Cooling System and Thermal Management To maintain optimal temperatures, the Used Air Compressor CMC uses a water-based cooling system for both the cylinders and compressed air. Specifically, copper tube and brass plate heat exchangers dissipate heat in both the intermediate and final compression phases. Furthermore, a gear-driven oil pump circulates lubricant through a dedicated heat exchanger, which enhances cooling performance. Additionally, a preheating resistor stabilizes thermal conditions during start-up. Therefore, the system reduces thermal stress and extends component life. Overall, this combination of cooling solutions ensures optimal efficiency throughout the filtration cycle. Ijdpfx Ajwcf Ewjf Tjib Mechanical Equipment and Functional Components CMC designed the Used Air Compressor CMC  with a base frame supported by four anti-vibration feet. As a result, operators can install the unit directly on the floor without additional foundation work. The W-type compressor block features dry cylinders and pistons with PTFE-loaded sealing rings. In contrast to lubricated systems, this configuration prevents oil contamination. Furthermore, stainless steel suction and delivery valves include automatic unloader mechanisms that support load/unload functionality. In terms of transmission, the motor and compressor connect via trapezoidal belts, which simplify maintenance. The intake side also includes a silenced filter, while a protective cage improves operator safety. Safety Devices, Monitoring, and Physical Layout The Used Air Compressor CMC integrates comprehensive safety and monitoring systems.

Condition: ready for operation (used), CMC 3528000M5000TAC-CR PM Servo Motor, serial no. according to photo, used, normal traces of use, 100% functional, scope of supply according to photos Iiedpfx Aoi D Hnxef Tob

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, encoder cover has a crack see photo, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Ijdpfoi D Hnqox Af Teib

Condition: used, Year of construction: 1998, machine/vehicle number: 531007, functionality: fully functional, SECOND-HAND THICKNESSER PLANER CMC MOD. SP530 - CE RULES - S/N 531007 Iodpfx Afox Rqmce Tjib - Year 1998

Year of construction: 2006, condition: excellent (used), The machine was taken out of operation and put into storage. Furthermore, it was driven as a capacity buffer and thus only little. The machine is sold with some spare parts such as engine / gearbox. Ijdpfxsncbtbs Af Teib

Condition: good (used), Year of construction: 2010, Ref: 10940 . 2010 CMC Q-Cover One Semi Auto casemaker that turns-in one side at a time and folds the corners automatically. The cover is then passed into the nip-roller, output on collector table. Equipped with: Huge variety of materials for high-quality cases and covers Lining operations on the same unit Stainless hot & cold gluing unit Automatic viscosity circuit and fast flushing system Case gauge for spine and pages Innovative corner tucking devices Vacuum-suction feeding belts for faster operation Ijdpfx Afjv Uqpme Teib Easy-operation touchscreen Adjustable case-collection hopper Accessories: Large size kit for box production etc Specification: Min size: 15mm x 15mm Max. size turned edge: 46 x 78mm Max. size edge-to-edge: 50 x 80mm Minimum Height of Case 105 mm Maximum Open Flat Case 760 x 460 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm - 3mm

Condition: new, Year of construction: 2025, fuel type: diesel, Drivetrain Iijdpfx Afox Dg Awo Tob Make of engine: Kubota Weights Empty weight: 3.053 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 2.300 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 1240 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Transport dimensions (LxWxH): 5,7x0,88x1,98 Rental currency: EUR Production country: IT Additional information Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2022, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Iedpfox A R Hkjx Af Teib Empty weight: 2.600 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.900 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 95000 m Max swing of arm in degrees: 356 Max swing of platform in degrees: 178 Rental currency: EUR Production country: IT Additional information Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2023, fuel type: diesel, Empty weight: 2.579 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.800 cm Max. horizontal reach: 1100 m Rental currency: EUR Production country: IT Iiedpex Dg Aqofx Af Tsb Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2022, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Iedpox Eg Enofx Af Teib Empty weight: 2.006 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 690 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 90 Transport dimensions (LxWxH): 4,03x0,77x1,98 Rental currency: EUR Production country: IT Additional information Please contact KEY-TEC Sales for more information