Used Cnc Fräsen Center for sale (18,219)

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active Bodpfx Asx E Dncjgkjld • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS Bsdpfx Asym T I Tjgksld * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: used, Year of construction: 2001, Lot consists of: (1) CNC Lathe Technical Details: X/Z 210/610 mm, 12-position tool turret / all positions driven (4,000 rpm), tailstock, C-axes, spindle speed 3,600 rpm, spindle bore 65 mm, coolant unit with KNOLL chip conveyor, and two drawer cabinets with accessories (no warranty of completeness) Bedpfx Ageym Rlvjksld The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: used, Year of construction: 2006, Lot consists of: (1) CNC Lathe Technical Details: Bljdpeym Rlcjfx Agksd Lot includes 1 x Spinner CNC lathe, an assortment of tools, and 1 x tool cabinet with contents (contents may vary). Tech. specs of the lathe: Max. turning diameter: 430 mm; distance between centers: 730 mm; Turret capacity: up to 12 driven tools; Control type: Fauc 21 i. The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl Bledpfx Aevu E R Ssgkjd mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Lathe 5 Axes X, Z, C, Y, B Turning and Milling Model Integrex 400 II Y Year 2003 CNC Mazak 640 MT Sold complete With tooling With documentation Blsdpfxeypb Ias Agked With chip conveyor

Condition: excellent (used), Year of construction: 2021, Turning length: 1,500 mm Max. turning diameter: 670 mm Max. main spindle speed: 5,000 rpm Max. counter spindle speed: 5,000 rpm Max. milling spindle speed: 12,000 rpm Max. milling spindle power: 24 kW Milling unit tool holder: CAPTO C6 Bjdpjx Nm Uasfx Agksld Includes: - HAINBUCH chuck with quick-change system - Bar feeder - KNOLL chip conveyor / belt filter - Various tools - Complete documentation

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks! Bjdpfx Aeyk R Dyogksld

Condition: good (used), Year of construction: 2002, operating hours: 33,328 h, functionality: fully functional, machine/vehicle number: 04780000151, turning length: 1,850 mm, turning diameter: 610 mm, spindle speed (min.): 3,200 rpm, travel distance X-axis: 605 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,470 mm, rapid traverse X-axis: 46 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 60 m/min, 5-axis, 12" CNC lathe with double chuck. Siemens control system. Spindle operating hours: 1891 hours. Transport at buyer's expense. Bodpfsyiy Sdsx Agksld

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 8,000 kg, Fanuc control, 12-position turret, Y-axis, Tailstock, Blodpfx Agjymfd Tjkjd Chip conveyor, Tool-Eye, Tool holders

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 8,000 kg, Fanuc control, 12-position BMT turret, Y-axis, Tool-Eye, Tailstock, Chip conveyor, Bjdpeymfdtjfx Agkeld Steady rest, Tool holders.

Condition: excellent (used), Year of construction: 2022, operating hours: 4,350 h, functionality: fully functional, machine/vehicle number: Gildemeister Sprint 20/8, spindle speed (max.): 10,000 rpm, mount diameter: 20 mm, type of input current: three-phase, total height: 1,830 mm, total length: 7,300 mm, total width: 1,500 mm, bar diameter (max.): 20 mm, overall weight: 5,000 kg, operating hours of spindle: 4,350 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Key Machine Specifications Machine Type: Swiss-type / horizontal production CNC lathe Model: Sprint 20|8 Control: FANUC CNC (typically 32i) 📏 Workpiece Capacities Max. workpiece diameter: 20 mm (≈ 0.79 in) Max. workable length: 180 mm (≈ 7.1 in) Bar capacity through spindle: 20 mm (≈ 0.79 in) Bsdjxwu U Iepfx Agkjld 🛠️ Axis & Travels Number of total axes: 6 linear axes + 2 C-axes (8 axes total) X-Axis travel: 50 mm (≈ 2 in) Y-Axis travel: 325 mm (≈ 12.8–13 in) Z-Axis travel: 60 mm (≈ 2.4 in) 🌀 Spindles & Drives Main spindle: ~10 000 rpm, ~2.2 kW / 14 Nm Counter spindle: ~10 000 rpm, ~1.5 kW / 4.8 Nm Total tool stations: 25 Driven tool spindles: 8 as standard (typically ~6 000 rpm) 🖥️ Control & Features CNC Control Panel: 10.4″ colour display with FANUC 32i Channels: 2 control channels, up to 2 C axes Simultaneous tool work: Up to 3 tools can operate at once Optional Packages: SWISSTYPEkit for short + long part turning

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter - mm turning length - mm control M 730 BM Additional information CNC control: M 730 BM Center distance: 500 mm Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Power: 11/7.5 kW (25% duty cycle / constant) Bledsyml Dmepfx Agked Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil mist separator Hinged belt chip conveyor Renishaw workpiece measuring system with optical signal transmission, counter spindle Cooling of the ball screw in the X-axis

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2100x2100 mm Weight 1500 kg Blodpfx Agev A Ha Dskod Total power requirement 17,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4000x2900x2100 mm Weight 2500 kg Bljdpfx Ajv A E Uasgked Total power requirement 24 kw

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Bljdoquhbgepfx Agkod Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Bljdpfxsutuyie Agkod Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Bledow Ed U Nopfx Agked Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Bodpfxsvta Rkj Agksld Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: used, Year of construction: 2022, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Transport packages [pcs.]: 2 Bodpfx Agjx Tt Unokeld Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm Bledpfx Agjuda Tneked O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Operating instructions

Condition: excellent (used), Year of construction: 1995, Centre Height: 330 mm Centre Distance: 2,000 mm Working Area: Max. Swing Diameter over Bed Cover: 650 mm Max. Swing Diameter over Cross Slide: 360 mm Main Spindle: Spindle Diameter at Front Bearing: 140 mm Spindle Bore: 107 mm Main Drive: 58.5 kW 2-step Speed Range: 4 – 750 rpm / 750 – 3,060 rpm Feed Drive: Rapid Traverse X/Z Axis: 10/10 m/min Tool Turret: Bljdpfx Aex Sx Htegkod Number of Tool Stations: 12 Of which Driven Tool Stations: 6 Tool Shank Holder: VDI 50 mm Dimensions / Weight: Footprint (L x W x H): approx. 6,400 x 2,150 x 2,000 mm Weight: 9,400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-station turret, VDI 50, including 6 driven tools in turret, brand SAUTER, DIN 5482 B 20x17, max. speed 3,000 rpm • Hydraulic 3-jaw chuck, Ø 315 mm, with various chuck jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • LTA make air extraction system • Various VDI 50 tool holders • CE compliant In 08 / 2025, the following parts were replaced by GILDEMEISTER service: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 single regeneration module, 1 control insert for 1 axis, 1 control module for 2 axes of the inverter servo drive, 1 Simodrive power module for 1-axis motor. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Bledpfxsylmdfj Agkjd Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Machine have 2 spindles. One for 6.300 min-1 SK 40 Bljdpfxeruauqs Agkod Second up to 42.000 min-1 HSK E40. Spindle replaced 2018.

Condition: good (used), Year of construction: 2004, Parts shown by hand not come. Bsdpsylykxefx Agkeld