Used Cnc Fräsen Center for sale (20,063)

Condition: good (used), Year of construction: 2007, The Emco Maxxturn 45 SM is in good condition and is still in use daily for production on the Emco Maxxturn 45. Primarily, parts made of plastic are manufactured on this machine. Spindle hours: only 23,848 hours. Approximately 6 months ago, the machine control panel with display and the air conditioning unit were replaced. Last maintenance performed in 04/2026; geometry was checked. The machine can still be inspected during production until week 39 of 2026. Technical data: Control: Siemens 840 D. Main spindle: Speed 6,300 rpm. Cedpjzyyp Ajfx Aptjhb Counter spindle 6,300 rpm. Spindle bore max. 45 mm. 2 x C-axis, 0.001°. High-pressure coolant system at the tool turret. Chip flushing for the counter spindle. Sauter tool turret with 12 stations, VDI25. All stations for driven tools. Speed range: 6,000 rpm. Travel in X/Z axis 160/510. Accessories: Chip conveyor Knoll. High-pressure coolant pump. Finished parts collector. Interface for bar feeder. New control cabinet air conditioning unit. LED indicator light, 4 wedge shoes, machine documentation. Machine keyboard with cover. 8 rigid tool holders VDI 25. 2 x axial driven tools. 1 x radial driven tool. The tools and clamping devices shown in the picture are not included in the sale.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Csdpfx Aezuwyzoptshb Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 1,55,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Chjdpfjzu S U Hex Aptjb Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2014, Main spindle power: 13.2 kW Drilling unit motor power: 7 kW 3-axis machine Drilling unit: Technical data - Nut saw - 2 horizontal drilling spindles in the X-axis (left/right) Chsdpfxozuwxdo Aptsb - 1 horizontal drilling spindle in the Y-axis (left/right) - 10 vertical drilling spindles

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Chedpfx Apszl Ap Netjb

Condition: excellent (used), Year of construction: 2011, The machine in a very good condition. 7,6 meters long, 2 working places. Possible to give a warranty up to 6 month. Chodpfxoyia Ezs Aptjb

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations Chodpfxsutuyie Aptsb - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, Year of construction: 1994, Storage location: Nattheim Chedpfx Ajwmm Nrjptjb

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Csdpfx Asxy Tmnsptehb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machining diameter: 4,200 mm Machining height: 550 mm Diameter of magnetic chuck: 4,000 mm Max. speed of rotary table: 13 min-1 Control system: SIEMENS SINUMERIK 840D PL RIGHT GRINDING HEAD Swiveling range, external: 50° Swiveling range, internal: 47° Max. grinding wheel diameter: 610 mm Max. grinding wheel height: 255 mm Max. workpiece height: 550 mm Travel – X: 2,820 mm Travel – Z: 820 mm Rapid traverse X + Z axes: 10,000 mm/min LEFT GRINDING HEAD Max. grinding wheel diameter: 610 mm Max. grinding wheel height: 255 mm Max. workpiece height: 540 mm Travel – U: 2,870 mm Travel – W: 790 mm Rapid traverse U + W axes: 10,000 mm/min GRINDING WHEEL MAGAZINE Right magazine: Number: 5 Left magazine, number: 4 DIMENSIONS AND WEIGHTS Machine weight: approx. 143,000 kg Machine dimensions (L x W x H): approx. 13,400 x 8,945 x 4,250 mm ACCESSORIES - Automatic grinding wheel changer, left (4) & right (5) - Automatic dressing unit for both grinding heads, MARPOSS P7 - Various grinding wheels and arbors - Oil mist emulsion extraction system - Automatic balancing device - Hydrostatic guidance in all machining axes Chjdpezynw Ijfx Aptsb DESCRIPTION The machine is in exceptionally good condition and has only been used for the highly precise finishing of large bearings for offshore wind turbines. The machining process included grinding the inner and outer diameters, as well as the highly precise raceways of the rolling bearings. The machining results achieved demonstrate the machine's outstanding performance. Inner and outer diameters with a workpiece diameter of up to 4,000 mm were ground within a tolerance of ±20 µm. A profile accuracy of 2–3 µm was achieved for the raceways.

Condition: used, Year of construction: 2015, Technical details: max. turning diameter: 255 mm turning length: 500 mm control: FANUC 31i manual guide swing dia.: 270 mm centre distance: 639 mm bar material dia.: 66 mm travel -x axis: Rev. 1+2:: 190 mm travel -y axis: Rev. 1+2: +- 40 mm travel -z axis: Rev. 1+2: 500 mm spindle turning speed - stepless: S1 / S2: 4000 / 5000 1/min spindle nose: A2-8 / A2-6 spindle bearing diameter: 120 / 100 mm C-Axis: 0,001 ° Turret No.1 stations / rotary tools: 12/12 Turret No.2 stations / rotary tools: 12/12 Driven Tools: 6000 1/min rapid traverse X-axis: 16 m/min rapid traverse Y-axis: 12 m/min rapid traverse Z-axis: 20 m/min spindle drive: S1: 15/11, S2: 7,5/5,5 kW Driven Tools: 18 kW Cjdpfszv Tmtsx Aptohb total power requirement: 65 kVA weight of the machine ca.: 9,6 t dimensions of the machine ca.: 2,85 x 2,2 x 2,05 m CNC-turning-center with 2 turrets, 2x 12-pockets (24 position) turret with 12 live-tools, Y-axis on both turrets. subspindle travel 635mm, rapid feed 30 m/min, chipconveyor, approx. ? h "machine on", approx. ?h "spindle on" *

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 8,000 rpm, total height: 2,530 mm, total width: 1,950 mm, total length: 2,600 mm, table width: 260 mm, table length: 800 mm, type of input current: three-phase, overall weight: 2,600 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, # CNC Machining Center 532 Metal Technics Polska MTP CNC 532 ## SPECIAL OFFER - 5% DISCOUNT Original price: €17,936 net EXW Discount: €896.80 SPECIAL PRICE: €17,039 NET EXW Year: 2026 Condition: New, fully functional Location: Sokołów Podlaski, Poland ## Description The MTP CNC 532 is a compact and precise vertical CNC machining center designed for milling, drilling and tapping of steel, aluminium, non-ferrous metals and engineering plastics. The machine features professional SIEMENS SINUMERIK 808 Advanced control, SIEMENS servo drives, precision linear guideways and ball screws. Its rigid construction provides excellent stability, accuracy and repeatability, making it suitable for CNC workshops, tool rooms, prototype production and small-to-medium series manufacturing. A fully enclosed working area protects the operator from chips and coolant, while the automatic lubrication system reduces maintenance requirements. ## Technical Specifications * Table: 800 x 260 mm * Spindle taper: BT30 (BT40 optional) * X/Y/Z travel: 500 / 320 / 420 mm * Spindle-to-table distance: 90-470 mm * Maximum spindle speed: 8000 rpm * Tool magazine: 10 positions * Rapid traverse X/Y/Z: 10 / 10 / 8 m/min * Working feed: 2.6-2500 mm/min * Servo torque X/Y/Z: 6 / 6 / 7.7 Nm * Positioning accuracy: +/- 0.02 mm * Repeatability: +/- 0.01 mm * Main motor: 3.7 kW * CNC control: SIEMENS SINUMERIK 808 Advanced * Servo drives: SIEMENS * Power supply: 400 V, three-phase * Dimensions: 2100 x 1800 x 2200 mm * Weight: 2100 kg ## Standard Equipment * SIEMENS SINUMERIK 808 Advanced CNC * SIEMENS servo drives * 8000 rpm spindle * 10-position automatic tool magazine Chedpfx Apey Ht Axoteb * Fully enclosed working chamber * Precision linear guideways and ball screws * Automatic lubrication system * Pneumatic system * LED working-area lighting * 3-color status/alarm lamp * CE Declaration of Conformity * Technical and operating documentation ## Applications Ideal for precision milling, drilling and tapping, prototype production, tool rooms, CNC workshops and serial manufacturing. ## Transport, Warranty & Service Professional transport is available throughout Europe, with costs calculated individually according to destination. Free collection from our warehouse in Sokołów Podlaski is also available. The machine is supplied with a 12-month warranty, warranty service and spare-parts support. Post-warranty servicing and spare parts are also available. ## SPECIAL PRICE Original price: €17,936 net EXW 5% discount: -€896.80 SPECIAL PRICE: €17,039 NET EXW VAT applies where legally required. Metal Technics Polska Fabryczna 1, 08-300 Sokołów Podlaski, Poland Contact us for availability, transport quotation, additional photos, videos or an individual commercial offer.

Year of construction: 2015, condition: ready for operation (used), A 5-axis dental CNC milling and grinding machine from imes-icore is offered. A-axis: 360°, B-axis: 115°, axis inclination with 98mm blank: A-axis/B-axis: 30°/25°, max. machining area: 94mm/30mm, blank holder: 98.5mm, workpiece holder: 1 blank, max. spindle speed: 60000rpm, spindle power: 1.0kW, tool holder: 6mm shank, tool changer: 20, tool length measurement: ≤0.002mm, control system: Logosol 5-axis. Machine dimensions X/Y/Z: approx. 758mm/790mm/857mm, weight: approx. 180kg. Inspection by appointment possible. Chsdezklfwepfx Aptjb

Condition: used, Year of construction: 2016, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel range X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Work table TV with 10 supports, L=1500 4 working areas 2 cross lasers Vacuum pump 250 m³/h PC control, Windows Vertical milling unit ISO 30, 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Chodpfey Dta Sjx Aptsb Dongle for XILOG software Storage location: Sonnefeld

Condition: used, Year of construction: 2001, functionality: fully functional, CNC turning and milling center Okuma MacTurn 30 Control system: OSP-U100L Year of manufacture: 2001 Internal machine number: 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Diameter of rotation over the machine bed: 500 mm Diameter of rotation over the tool slide: 500 mm Tool holder: SK 40 Tool positions: 60 positions Travel ranges: X-axis: 430 mm Y-axis: 190 (+/-95) mm Z-axis: 1,090 mm C-axis: 0.001° - 3-jaw chuck SMW Autoblok - Programmable tailstock - Chip conveyor Chsdpszwl Raofx Apteb - Paper band filter system with high-pressure pump - Oil mist extraction system - Touchsetter - One Touch IGF - Door automatic - Large chuck package - Large tool package

Condition: as good as new (ex-display), Year of construction: 2023, Control: Fanuc Turning diameter: 400 mm Turning length: 560 mm Swinging diameter: 690 mm Bar capacity: 81 mm Rapid traverse rate: 30 / 10 / 30 m/min Main spindle Bar capacity: 81 mm Chuck size: 250 mm Spindle speed: 3,500 rpm Spindle power: 25.5 kW Spindle torque: 424 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Power: 5.6 kW Chedpfx Apozw Uf Hotjb Torque: 53.4 Nm Tool interface: BMT-65 / BH Travel X: 240 mm Travel Z: 120 mm Travel Y: +/-60 mm

Condition: used, functionality: fully functional, turning diameter: 435 mm, spindle motor power: 11,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 360 mm, type of input current: three-phase, total height: 1,900 mm, total length: 2,500 mm, total width: 1,500 mm, quill stroke: 275 mm, quill diameter: 55 mm, overall weight: 3,600 kg, Equipment: rotational speed infinitely variable, Control system: Fusion 640 t 12-position tool turret, tailstock included Chip conveyor included Chjdpfx Aszxyupoptsb

Condition: as good as new (ex-display), Year of construction: 2022, CNC turning machine Goodway GS 3300 LY Turning diameter: 570 mm Bar capacity: 91 mm Turning length: 1500 mm Fanuc OTi control Cedszw Ub Ujpfx Aptohb 3-jaw chuck: 315 mm Y-axis and C-axis Spindle speed: 3000 rpm Tool holder: AGW BMT 55 Gearbox Tailstock Steady rest

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Format4 Type: Profit H500S 16.56 Year of manufacture: 2016 Codszux Rbjpfx Aptehb Technical data Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump 2 tool changers

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For a description, please refer to the attached data sheet. Codpfxjzqcvye Aptjhb

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Cedpfx Apeqvnl Totshb

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Codjvvi Rfopfx Aptehb

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre Cjdszr Hgxspfx Aptshb * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8042942713C, CNC lathe Manufacturer: Gildemeister Type: CTX 310 V3 Machine no.: 8042942713C Year of manufacture: 2008 Cedpfx Ajzvmnksptohb Control system: Heidenhain IT Maximum turning diameter: 500 mm Spindle bore: 65 mm Drive power: 40/100% ED: 16/12 kW Speed range: 25-6000 rpm Weight (approx.): 3500 kg - 12-station turret - VDI 30 - Chip conveyor - C-axis - Powered tools, 12 stations - Bar feeding package - LNS short magazine, QuickLoad Servo 3 - Tailstock - Hainbuch ToplusMini centering chuck, 65 mm Subject to errors and omissions.

Condition: good (used), CMZ brand CNC lathe, TX66 Y2 Quattro model, year 2012, with powered tooling on both turrets, Y-axis... Chedpfxszcu His Aptjb